ASME SA 333 Gr 6 Seamless pipe and Thick Wall A333 LTCS Pipe supplier in Mumbai

What is ASTM A333 Grade 6 Pipe material?
ASTM A333 Grade 6 pipe is a carbon steel grade. The pipes in this grade are available in nominal wall seamless, welded carbon, and alloy steel. The versatile grade is intended for use in low temperatures and ranges in sizes from ½ to 36 inches. The pipes in the A333 grade 6 possess a minimum tensile strength of 415mpa with a minimum yield strength of 240mpa. The high-strength modules are used in the transportation of oil and gases over long distances. 

A333 gr 6 vs A333 gr 3
Grade 6 and 3 are two prominent classes in the A333 grade. Both of them can be distinguished based on certain features.

  • A333 gr 3 shows the presence of nickel. Grade 6 has a content of chromium, nickel, and molybdenum, giving them superior corrosion resistance properties.
  • A333 gr 6 is designed with a tensile strength of 415mpa with a yield strength of 240mpa. Grade 3 is designed with a tensile strength of 450mpa with a yield strength of 240mpa.

What is the difference between SA 333 Gr 6 seam and ASTM A333 Grade 6 seamless pipe?
The SA/ASTM 333 Gr 6 can be classified as seam and seamless pipe grade. Both these types can be distinguished based on their manufacturing methods and load-bearing capacity.

  • A seamless pipe of ASTM A333 gr 6 pipes is produced by hot rolling or passing hot steel billets through metal components and precisely shaping them. SA 333 Gr seam or welded pipe is produced by welding a plate or strip using a spiral seam.
  • Seam welded pipes are used in the transportation of low-pressure fluids and gases. Seamless pipes in this grade are used in high-pressure media.
  • SA333 Gr 6 seam pipes are cheaper than A333 grade 6 pipes.
ASTM A333 Grade 6 Pipe Manufacturer in India

External/ Internally Coated A333 Gr 6 ERW Pipe and A333 Grade 6 Coated Pipe, High ductility ASTM A333 GR. 6 Carbon Steel Line Pipes, Gas Pipes and SA 333 grade 6 Schedule 40 Pipe sizes according to american standard

Looking for A333 Grade 6 Pipe Supplier in India? ASME B36.19/ B36.10 ASTM A333 Seamless Pipe and Ltcs ASTM A333 Gr 6 Schedule 40 Pipe with Beveled End, FBE, Cement, Epoxy Lined A333 Carbon Steel Double Wall Pipe at Lowest cost in India

ASTM A333 Grade 6 Pipe Specification And Grade

A333 Gr 6 Pipe Specification ASTM/ ASME A333 /SA333
Schedules Schedule 40, Schedule 80, Schedule 160, Schedule XS, Schedule XXS Supplier/ Manufacturer
ASTM A333 Grade 6 Pipe Dimensions ASME, API and ASTM
Type ERW / Fabricated / Seamless / Welded
Material Test Certificate (MTC) provided by ASTM A333 Gr 6 Material suppliers Ultrasonic Testing (UT), IBR, EIL, NDE, ISO 14001:2015, Radiographic Testing (RT), ISO 9001:2005, PED
Size 1/2” NB upto 36” NB
Length Max18 Meters, Min 3 Meters, or according to customer’s requirement
Value Added Services Provided by supplier Beveling, Cutting, Polishing, Ultrasonic Testing, Destructive, Threading, Non Destructive
Thickness 3 to12mm
Form Round and Hydraulic
Marking
  • Heat Number
  • Specification
  • Nominal Pipe Sizes
  • Grade
  • Manufacturing Method (Welded / Seamless)
  • Manufacturer and Supplier Name or Custom Logo - on request
  • Pipe Schedule or Wall Thickness
End Beveled End, Plain End, Treaded
Supplier of ASME A333 Pipe offer various shapes Semi-Rhomboid, Triangle, Oval, Rectangle, Elliptical, Square, Rhomboid, Hollow, Hollow, Round, Semi-Round, Semi-oval

ASTM A333 Grade 6 Pipe Physical Composition

Thermal Conductivity 360
Density (lb / cu. in.) 0.284
Mean Coeff Thermal Expansion 6.3
Specific Gravity 7.9
Modulus of Elasticity Tension 30
Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) 0.105
Modulus of Elasticity Torsion 11
Melting Point (Deg F) 2750

ASTM A333 Grade 6 Pipe Equivalent Material

Sa 333 Gr 6 Equivalent New Former
Execution Standard Material Standard Material
Seamless EN 10216-4 P265NL ASTM A333 GRADE 6

Prestige quality A333 Gr 6 Equivalent Supplier in India offer in ANSI, EN, DIN, BS, ASME or ASTM standard.

NFA DIN ASTM EN ASME BS
ASTM A333 Grade6 DIN 17178 Grade FGP 28 ASME SA 333 Grade 6 EN P265NL Grade 10216-4 UNI C20 NFA A 36-2051) Grade A 42 AP

A333 Gr 6 ERW Pipe Tensile Requirements

Grade 1 Grade 3 Grade 6
psi MPa MPa psi psi MPa
Yield Propeties, min 30,000 205 240 35,000 35,000 240
Tensile Properties, min 55,000 380 450 65,000 60,000 415
Longitudinal Transverse Transverse Longitudinal Longitudinal Transverse
Elongation in 2 in. or 50 mm, (or 4D), min, %:
When the standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used 28 20 14 22 22 12
Basic minimum elongation for walls 5/16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section 35 25 20 30 30 16.5
For strip tests, a deduction for each 1/32in. [0.8 mm] decrease in wall thickness below 5/16 in. [8 mm] from the basic minimum elongation of the following percentage 1.75 1.25 1.00 1.50 1.50 1.00
Elongation in 2 in. or 50 mm, min, %:

ASTM A333 Grade 6 Pipe

20 ksi to 400°F and 18.9 ksi to 500°F

A333 Grade 6 Pipe Chemical Composition Standard

P.M. Metal helps you to find materials by A333 Gr 6 Chemical Composition / analysis in our steel database.

Sa 333 Gr 6 Chemical Composition, %
Element Grade 1 Grade 3 Grade 6
Phosphorous, max 0.025 0.025 0.025
Carbon, max 0.30 0.19 0.30
Sulfur, max 0.025 0.025 0.025
Manganese 0.40 – 1.06 0.31 – 0.64 0.29 – 1.06
Nickel 3.18 – 3.82
Silicon 0.18 -0.37 0.10 min

Large Diameter A333 Grade 6 Pipe Impact Test Values

Size of Specimen, min Minimum Average Notched Bar Impact Value of Each Set of Three Specimens Impact Temperature Minimum Notched Bar Impact Value of One Specimen Only of a Set
ft-lbf J Grade Min Impact
Test Temp
ft-lbf J
10 by 5 7 9 6 -50 -45 5 7
10 by 10 13 18 F C 10 14
10 by 3.33 5 7 3 4
10 by 7.5 10 14 1 -50 -45 8 11
10 by 2.5 4 5 3 4
10 by 6.67 9 12 3 -150 -100 7 9

A333 Gr 6 Pipe Mechanical Properties

Grade Yield Properties, min, psi (MPa) Tensile Pproperties, min, psi (MPa)
A333 Gr.6 35 000 (240) 60 000 (415)
Manufacturer & Supplier of Carbon Steel A333 gr 6 Material for Oil & gas industries, Get ASTM A333 Galvanized Pipe Material OD Sch-10/ 40/ 60/ XXS as per NACE MR0175 standard and Test report

A333 Grade 6 Pipe Wall Thickness

Wall Thickness Grade 1 Grade 3 Grade 6
in. mm Transverse Longitudinal Longitudinal Transverse Transverse Longitudinal
3/16 (.188) 4.8 28 24 24
5/16 (0.312) 8 25 35 30 20 16 30
5/32 (.156) 4 26 22 22
9/32 (.281) 7.2 24 33 28 19 15 28
1/8 (.125) 3.2 25 21 21
1/4 (.250) 6.4 23 32 27 18 15 27
1/16 (.063) 1.6 21 18 18
7/32 (.219) 5.6 30 26 26
3/32 (.094) 2.4 23 20 20

SA 333 Gr 6 Lined Pipe Material Required Markings on Each Length

Hot Finished or Cold Drawn Manufacture Name
Specification / Grade Hydro or NDE
A333 Gr 6 Pipe Schedule Number
Seamless or Welded
the letters “QT” when the pipe is furnished in the quenched and tempered condition
the letters “LT” followed by the temperature at which the impact tests were made * and **
ASTM A333 Carbon Steel Pipes
ASTM A333 Carbon Steel Pipes
ASTM A333 Carbon Steel Pipes
Carbon Steel A333 Grade 6 Pipe
Carbon Steel A333 Grade 6 Pipe
Carbon Steel A333 Grade 6 Pipe
ASTM A333 Gr 6 Material
ASTM A333 Gr 6 Material
ASTM A333 Gr 6 Material
A333 Gr 6 Welded Pipes
A333 Gr 6 Welded Pipes
A333 Gr 6 Welded Pipes
ASTM A333 Gr6 Pipe
ASTM A333 Gr6 Pipe
ASTM A333 Gr6 Pipe
A333gr6 Pipe
A333gr6 Pipes
A333gr6 Pipes
ASME A333 Pipes
ASME A333 Pipes
ASME A333 Pipes
Ltcs ASTM A333 Gr 6 Schedule 40 Pipes
Ltcs ASTM A333 Gr 6 Schedule 40 Pipes
Ltcs ASTM A333 Gr 6 Schedule 40 Pipes
Epoxy Lined SA333 Gr 6 Material
Epoxy Lined SA333 Gr 6 Material
Epoxy Lined SA333 Gr 6 Material
Buy Low temperature A333 seamless pipe in various coating including FBE, Cement Lined, Internally and Epoxy coated Pipes, Supply Large Diameter/ Thin /Heavy Wall size A333 Gr 6 Material from stock
OD 1.0 to 30mm, 10.0 to 700.0mm
WT Schedule 5, Schedule 10, Schedule 20, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, XXS
Specification
  • We can also produce according to customers requirement
  • Outer Diameter:10mm – 700mm;2.Wall Thickness:1.0mm–30mm;3.Length:Max 12m
Material En 10216-4 p215nl, EN 10216-4 p265nl, bs en 10216-4, sr en 10216-4, din en 10216-4, 10#20#45#16Mn A106 Gr A, B, ASTM A315B, A179, A335 P11, A335 P5, A335 P22, 12CrMo 20CrMo 15CrMo 42CrMo 10CrMo 12Cr1Mov 910A 355P 22 STF A25, A53 Gr B
Maximum Allowable Pressure (psi)
NPS Outside Diameter Schedule
(in) (in) XS 10 80 100 20 140 30 160 STD 120 40 XXS 60
1 1/2 1.9 5158 5158 7247 3739 3739 10316
1/4 0.54 10798 10798 7985 7985
2 2.375 4498 4498 7097 3177 3177 8995
3/8 0.675 9147 9147 6606 6606
3 3.5 4200 4200 6132 3024 3024 8400
1/2 0.84 8575 8575 10908 6358 6358 17150
4 4.5 3670 3670 5782 2581 4769 2581 7339
3/4 1.05 7187 7187 10220 5273 5273 14373
6 6.625 3195 3195 5318 2071 4157 2071 6390
1 1.315 6670 6670 9316 4956 4956 13340
10 10.75 2279 2708 3277 1140 4558 1399 5128 1664 3847 1664 4558 2279
1 1/4 1.66 5638 5638 7380 4133 4133 11276
14 14 1750 875 2625 3283 1092 4375 1313 4921 1313 3829 1533 2079
2 1/2 2.875 4704 4704 6391 3460 3460 9408
18 18 1361 681 2553 3147 849 4252 1192 4848 1021 3743 1530 2042
3 1/2 4 3896 3896 2769 2769
22 22 1114 557 2506 3063 835 4176 1114 4733 835 3619 1949
5 5.563 3303 3303 5505 2273 4404 2273 6606
30 30 817 510 817 1021 613
8 8.625 2841 2841 3375 1420 4613 1574 5147 1829 4085 1829 4971 2307
32 32 478 766 957 574 1054
12 12.75 1922 2644 3244 961 4324 1268 5042 1441 3843 1560 3843 2160
36 36 425 681 851 510 1021
16 16 1531 766 2585 3157 956 4404 1148 4882 1148 3733 1531 2009
20 20 1225 613 2526 3138 919 4288 1225 4824 919 3675 1455 1989
24 24 1021 510 2489 3126 766 4210 1147 4786 766 3700 1405 1978
34 34 450 721 901 540 992
42 42 583 729 438 875
  • 1 in (inch) = 25.4 mm
  • 1 psi (lb/in2) = 6,894.8 Pa (N/m2) = 6.895x10-2 bar
  • 2″ – 48″ Sch 40, 60, 80, 120, 160, XXS etc
  • JIS Equivalent: 3460 STPL380, STPL450
  • DIN Equivalent: TT St 41N, 1-Ni 14, TT St 45N
Nominal (MM) Ooter diameter MM Pipes size (inch) Schedule 20 Schedule 30 Schedule STD Schedule 40 Schedule 60 Schedule Extra Strong (XS)
3 10.3 1/8 0.37 1.73 1.73 0.357 2.41 0.47
6 13.7 ¼ 0.63 2.24 2.24 0.625 3.02 0.804
10 17.1 3/8 0.84 2.31 2.31 0.84 3.2 1.1
15 21.3 ½ 1.26 2.77 2.77 1.26 3.73 1.62
20 26.7 ¾ 1.69 2.87 2.87 1.68 3.91 2.2
25 33.4 1 2.5 3.38 3.38 2.5 4.55 3.24
32 42.2 11/4 3.39 3.56 3.56 3.38 4.85 4.47
40 48.3 11/2 4.05 3.68 3.68 4.05 5.08 5.41
50 60.3 2 5.44 3.9 3.9 5.44 5.5 7.48
65 73 21/2 8.63 5.2 5.16 8.63 7 11.41
80 88.9 3/8 11.3 5.5 5.5 11.3 7.62 15.3
90 1.6 31/2 13.57 5.74 5.74 13.57 8.08 18.63
100 114.3 4 16.07 6.02 6.02 16.07 8.56 22.3
125 141.3 5 21.77 6.6 6.55 21.77 9.53 30.9
150 168.3 6 28.26 7.11 7.11 28.26 10.97 42.5
200 219.1 8 33.3 6.35 7 36.8 42.5 8.2 8.2 42.5 53.1 10.3 12.7 64.6
250 273 10 41.7 6.35 7.8 51.3 60.3 9.27 9.27 60.3 81.5 12.7 12.7 81.5
300 323.9 12 49.7 6.35 8.4 65.2 73.8 9.53 10.3 79.7 109 14.3 12.7 97.4
350 355.6 14 68.1 7.92 9.53 81.3 81.3 9.53 11.13 94.3 126.4 15.1 12.7 107
400 406.4 16 77.9 7.92 9.5 93.3 93.3 9.53 12.7 123 160 16.7 12.7 123
450 457.2 18 87.8 7.92 11.1 122 105 9.53 14.3 156 206 19 12.7 130
500 508 20 117.2 9.53 12.7 155.1 177.2 9.53 15.1 183 248 20.6 12.7 155.1
550 558.8 22 129 9.53 12.7 171 129 9.53 294 22.2 12.7 171
600 609.6 24 141 9.53 14.3 210 141 9.53 17.4 255 355 24.5 12.7 187
  • WEIGHT per Kg. / Mtr.
  • Wall Thickness in MM, Wt = Weight in Kg. / Mtr.
Pipes Sizes (inch) Weight/feet Schedules Oouter diameter Wall Thickness (Wt) Inner diameter
1/2″ 1.31 160 0.84 0.188 0.464
1/8″ 0.25 40 0.405 0.068 0.269
3/4″ 1.13 40 1.05 0.113 0.824
1/8″ 0.32 80 0.405 0.095 0.215
3/4″ 1.94 160 1.05 0.219 0.612
1/4″ 0.43 40 0.54 0.088 0.364
1″ 1.68 40 1.315 0.133 1.049
1/4″ 0.54 80 0.54 0.119 0.302
1″ 2.84 160 1.315 0.25 0.815
3/8″ 0.57 40 0.675 0.091 0.493
1-1/4″ 2.27 40 1.66 0.14 1.38
3/8″ 0.74 80 0.675 0.126 0.423
1-1/4″ 3.76 160 1.66 0.25 1.16
1/2″ 0.85 40 0.84 0.109 0.622
24″ 483.12 140 24 2.062 19.876
1/2″ 1.09 80 0.84 0.147 0.546
1/2″ 1.71 XXH 0.84 0.294 0.252
3/4″ 1.47 80 1.05 0.154 0.742
3/4′ 2.44 XXH 1.05 0.308 0.434
1″ 2.17 80 1.315 0.179 0.957
1″ 3.66 XXH 1.315 0.358 0.599
1-1/4″ 3 80 1.66 0.191 1.278
1-1/4″ 5.21 XXH 1.66 0.382 0.896
Outside Diameter, inch Tolerance, %
OD≥20, WT/OD≤5% +22.5/-12.5
1/8≤OD≤2-1/2 +20.0/-12.5
3≤OD≤18, WT/OD>5% +15.0/-12.5
OD≥20, WT/OD>5% +15.0/-12.5
3≤OD≤18, WT/OD≤5% +22.5/-12.5
Size NPS Weight per Foot Pipe O.D. Standard to XXHY Wall Thickness Section Modulus Pipe I.D. Schedule
Pipe #
Gallon Capacity Per Linear Foot
1/2 0.85 0.84 STD 0.109 .0407 0.622 40 .0158
1.09 XHY 0.147 .0478 0.546 80 .0122
1.31 0.188 .0528 0.464 160 .0088
1.72 XXHY 0.294 .0577 0.252 .0026
3/4 1.13 1.05 STD 0.113 .0705 0.824 40 .0277
1.48 XHY 0.154 .0853 0.742 80 .0225
1.95 0.219 .1006 0.612 160 .0153
2.44 XXHY 0.308 .1103 0.434 .0077
1 1.68 1.315 STD 0.133 .1328 1.049 40 .0449
2.17 XHY 0.179 .1606 0.957 80 .0374
2.85 0.250 .1904 0.815 160 .0271
3.66 XXHY 0.358 .2136 0.599 .0146
1 1/4 2.27 1.66 STD 0.140 .2346 1.380 40 .0777
3.00 XHY 0.191 .2913 1.278 80 .0666
3.77 0.250 .3421 1.160 160 .0549
5.22 0.382 .4110 0.896 .0328
1 1/2 2.72 1.90 STD 0.145 .3262 1.610 40 .1058
3.63 XHY 0.200 .4118 1.500 80 .0918
4.86 0.281 .5079 1.338 160 .0730
6.41 0.400 .5977 1.100 .0494
2 2.64 2.375 0.109 .4205 2.157 10 .1898
3.66 STD 0.154 .5606 2.067 40 .1743
5.03 XHY 0.218 .7309 1.939 80 .1534
5.68 0.250 .8045 1.875 .1434
6.29 0.281 .8666 1.813 .1344
7.47 0.344 .9806 1.687 160 .1161
9.04 XXHY 0.436 1.1043 1.503 .0922
2 1/2 3.53 2.875 0.120 .6870 2.635 10 .2833
5.80 STD. 0.203 1.0640 2.469 40 .2487
6.14 0.216 1.1169 2.443 .2435
7.02 0.250 1.2468 2.375 .2301
7.67 XHY 0.276 1.3386 2.323 80 .2202
10.02 0.375 1.6371 2.125 160 .1842
13.71 XXXHY 0.552 1.9971 1.771 .1280
3 4.34 3.50 0.120 1.0411 3.260 .4336
5.58 0.156 1.3122 3.188 .4147
6.12 0.172 1.4265 3.156 .4064
6.66 0.188 1.5342 3.124 .3984
7.58 STD. 0.216 1.7241 3.068 40 .3840
8.69 0.250 1.9372 3.000 .3672
9.67 0.281 2.1207 2.938 .3521
10.26 XHY 0.300 2.2253 2.900 80 .3431
14.34 0.438 2.8774 2.624 160 .2811
18.6 XXHY 0.600 3.4243 2.300 .2158
3 1/2 4.98 4.0 0.120 1.3776 3.760 10 .5768
9.12 STD. 0.226 2.3939 3.548 140 .5136
10.02 0.250 2.6001 3.500 .4998
11.17 0.281 2.8562 3.438 .4821
12.52 XHY 0.318 3.1400 3.364 80 .4617
22.87 XXHY 0.636 4.8795 2..728 .3085
4 5.62 4.5 0.120 1.7612 4.260 10 .7404
7.24 0.156 2.2354 4.188 .7156
8.67 0.188 2.6296 4.124 .6942
9.32 0.203 2.8173 4.094 .6838
10.02 0.219 3.0184 4.062 .6725
10.80 STD. 0.237 3.2145 4.026 40 .6613
11.36 0.250 3.3611 4.000 .6528
12.67 0.281 3.7021 3.938 60 .6326
13.97 0.312 4.0273 3.876 .6126
15.00 XHY 0.337 4.2713 3.826 80 .5972
19.02 0.438 5.1790 3.624 120 .5361
22.53 0.531 5.8997 3.438 160 .4822
27.57 XXHY 0.674 6.7927 3.152 .4054
5 10.80 5.563 0.188 4.1161 5.187 1.0979
12.51 0.219 4.7279 5.125 1.0716
14.63 STD. 0.258 5.4500 5.047 40 1.0391
15.87 0.281 5.8644 5.001 1.0204
17.51 0.312 6.4074 4.939 .99647
19.19 0.344 6.9358 4.875 .9696
20.80 XHY 0.375 7.4300 4.813 80 .9449
27.06 0.500 9.2534 4.563 120 .8495
32.99 0.625 10.7976 4.313 160 .7590
38.59 XXHY 0.750 12.0954 4.063 .6734
6 7.59 6.625 0.109 3.5769 6.407 5 1.6748
9.30 0.134 4.3475 6.357 10 1.6488
10.79 0.156 5.0107 6.313 1.6260
12.94 0.188 5.9351 6.249 1.5937
13.94 0.203 6.3804 6.219 1.5780
15.00 0.219 6.8261 6.187 1.5620
17.04 0.250 7.6905 6.125 1.5306
18.99 STD. 0.280 8.4958 6.065 40 1.5008
21.06 0.312 9.3416 6.001 1.4688
23.10 0.344 10.111 5.937 1.4391
25.05 0.375 10.893 5.875 1.4082
28.60 XHY 0.432 12.224 5.761 80 1.3541
32.74 0.500 13.711 5.625 1.2909
36.43 0.562 14.9806 5.501 120 1.2346
40.09 0.625 16.1821 5.375 1.1787
45.39 0.719 17.8243 5.187 160 1.0977
53.21 XXHY 0.864 20.025 4.897 .9784
60.13 1.000 21.7719 4.625 .8727
66.14 1.125 23.1237 4.375 .7809
Grade The lowest temperature for strike test
ASTM A333 Gr.6 -100 -150
Searching ASTM A333 Grade 6 Pipe manufacturer in India for fastest delivery? Cut to length ASTM A333 Grade 6 Nace & SA 333 Gr 6 Lined Pipe at lowest price, SA 333 Gr 6 Pipe available in custom sizes

Indian stockist and supplier supply ASTM A333 Gr 6 Material at best price

ASTM A333 gr.6 low temperature seamless steel pipe / a333 grade 6 steel tube

$0.59 / Kg

ASTM A333 gr.6 low temperature seamless steel pipe / a333 grade 6 steel tube

ASTM A333 GR 6 SMLS PIPE ASTM A333 GR 6 219.1 X8.18MM for low temp project

$800.00 / Ton

ASTM A333 GR 6 SMLS PIPE ASTM A333 GR 6 219.1 X8.18MM for low temp project

6 Inch SCH 10S Thin Wall Seamless Stainless Steel Pipe ASTM A312 TP316 316L

$1,000.00 / Ton

6 Inch SCH 10S Thin Wall Seamless Stainless Steel Pipe ASTM A312 TP316 316L

A333 Gr.6 Low Temperature Carbon Steel Seamless Line Pipe

$$600.00 / Ton

A333 Gr.6 Low Temperature Carbon Steel Seamless Line Pipe

Black Iron api 5ct n80 astm a333 gr.6 15 inch seamless casing pipe length r1 r2 r3

$7.00 / Piece

Black Iron api 5ct n80 astm a333 gr.6 15 inch seamless casing pipe length r1 r2 r3

Hot Selling ASTM A333 Gr.6 Butt Welding Pipe CS Pipe Grade 6 pipe

$1,100.00 / Ton

Hot Selling ASTM A333 Gr.6 Butt Welding Pipe CS Pipe Grade 6 pipe

ASTM A333 Grade 6 Vs A106 Grade B
Sa333 Material SA 333 Gr 6 Lined Pipe Material
Sa333 Gr 6 Pipes A333 Grade 6 Seamless Pipes
ASTM A333 Grade 6 Nace Pipes A333 Gr 6 Pipes
Sa333 Gr 6 Material Ltcs ASTM A333 Gr 6 Schedule 40 Pipes
ASTM A333 Gr6 Pipes Heavy Wall A333 Steel Pipes
A333gr6 Pipes A333 Carbon Steel Double Wall Pipes
Sa 333 Gr6 Pipes SA333 gr6 Cement Lined Pipes
ASME A333 Pipes A333 Pipe Material
ASTM A333 Carbon Steel Pipes Astm A333 Grade 6 Pipes
ASTM A333 Gr 6 Pipes A333 Pipes
ASTM A333 Grade 6 Pipes Sa 333 Gr 6 Pipes
A333 Gr 6 Material Epoxy Lined SA333 Gr 6 Material
A333 Gr 6 Pipes A333 Steel Pipes
A333 Low Temp Pipes Pipe ASTM A333 Grade 6 Seamless ASME B36.10m/b36.19m Pe
Carbon Steel A333 Grade 6 Pipes ASTM A333 Low Temperature Steel Pipes
A333 Gr 6 Smls Pipes LTCS ASTM A333 Gr 6 Pipes
Sa333 Grade 6 Pipes A333 Carbon Steel Low temperature tube
LTCS Pipe material ASTM A333 Gr 6 Material
A333 Gr 6 Welded Pipes LTCS Pipes
Welding A333 Grade 6 Pipes A333 Grade 6 Pipes
A333 Gr 6 ERW Pipes Ltcs ASTM A333 Gr 6
A333 Grade 6 Coated Pipes A333 Material
A333 Seamless Pipes SA333 Pipes
A333 Welded Pipe Material ASTM A333 Pipes
Thick Wall SA333 Pipes ASTM A333 Gr 6 Material
Thin Wall ASTM A333 Pipes Large Diameter A333 Grade 6 Pipes
A333 Galvanized Pipe Material SA 333 Gr 6 Material

Looking for

a Local ASTM A333 Grade 6 Pipe Supplier in your country? Check what we have supplied in the following countries

Application Projects
P.M. Metal Logo

ASTM A333 Gr6 Pipe

Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).

Application Projects
P.M. Metal Logo

ASTM A333 Carbon Steel Pipe

Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).

Application Projects
P.M. Metal Logo

A333 Seamless Pipe

USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.

Application Projects
P.M. Metal Logo

A333 Galvanized Pipe Material

Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.

Application Projects
P.M. Metal Logo

A333 Grade 6 Seamless Pipe

Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.

Application Projects
P.M. Metal Logo

SA 333 Gr 6 Material

France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.