What is IS 2062 Grade B Plate ?
IS 2062 is an Indian steel structural grade plate. The superior chemical content gives these plates enhanced resistance to corrosive media across stress-induced setups. The plates in this grade can carry heavy loads and provide support to different structural applications. The versatile modules provide good toughness across a range of environments and showcase enhanced mechanical properties with outstanding impact resistance. The plates in this grade are shaped in a range of dimensions and are very flexible making them ideal for various project types.
Difference Between IS 2062 Grade A Plate and Grade B Plate ?
IS 2062 Grade A and Grade B plates are important grades of the IS 2062 range. The major difference between these grades is the slightly higher carbon content in grade A when compared to grade B components.
What exactly IS 2062 Plate Thickness and how to calculate it
IS 1062 plate thickness is between 6mm up 100mm or more. The thickness can be calculated using the following steps.
IS 2062 Grade B Vs IS 2062 E250 BR
The IS 2062 Grade B and IS 2062 E250 BR grades have similar chemical properties and certain features. The major difference between both these components is their Charpy impact resistance. Standard Charpy impact resistance of the IS 2062 E250 BR is higher than the IS 2062 Grade B grade.
Table of Content
IS 2062 E250 Steel Plate Specification | ASME, API and ASTM |
---|---|
Item | High Tensile Structural Steel and Hot Rolled Medium - IS 2062 GR B |
Surface Finish | Anti rust oiled, color coated, PE coated, checkered, anti rust varnished, Galvanized, Black painted etc |
Thickness | from 0.3 to 500mm |
Application | Steel Boiler plate and Pressure Vessel Plate |
Width | betweel 1000mm to 4500mm |
Form | Shim Sheet, Flats, Blank (Circle), Chequered Plate, Perforated-Sheet, Strip, Plain Sheet, Rolls, Ring (Flange), Foils, Coils etc. |
Length | From 2, 2.44, 3, 6, 8, 12, or rolled, etc |
Element | P | C | Si | Mn | Nb+V+Ti | S | C.E. Value |
---|---|---|---|---|---|---|---|
E-250 Gr-A | 0.050 max | 0.23 max | 0.40 max | 1.50 max | - | 0.050 max | 0.42 max |
E-250 Gr-B | 0.045 max | 0.22 max | 0.40 max | 1.50 max | - | 0.045 max | 0.41 max |
E-250 Gr-C | 0.040 max | 0.20 max | 0.40 max | 1.50 max | - | 0.040 max | 0.39 max |
E-300 | 0.045 max | 0.20 max | 0.45 max | 1.30 max | 0.25 max | 0.045 max | 0.40 max |
E-350 | 0.045 max | 0.20 max | 0.45 max | 1.50 max | 0.25 max | 0.045 max | 0.42 max |
E-410 | 0.045 max | 0.20 max | 0.45 max | 1.60 max | 0.25 max | 0.045 max | 0.44 max |
E-450 Gr-D | 0.045 max | 0.22 max | 0.45 max | 1.60 max | 0.25 max | 0.045 max | 0.46 max |
E-450 Gr-E | 0.045 max | 0.22 max | 0.45 max | 1.80 max | 0.25 max | 0.045 max | 0.48 max |
IS 2062 E350 Grade Steel Mechanical Properties | Yield Properties | Tensile Properties | Elongational (%) | Bend Test | ||
---|---|---|---|---|---|---|
<20mm | 20mm-40mm | >40mm | ||||
IS 2062 GR B | 250 | 240 | 230 | 410 | 23 | 27J at 0 ° C |
Grade | DIN 17100 | EN10025(90) | NFA 35-501 | BS4360 | EN10025(93) |
---|---|---|---|---|---|
IS2062 GR.B | St 44-3U | Fe 430C | E28-3 | 43 C | S275J0 |
Specification : IS: 1993 in Standard/Seconds or TIN SAIL. | ||||
Code | Nominal coating wt in gm/m2 Per surface | Min average coating mass in gm/m2 | Nominal coating wt in gm/m2 Total both surface | Min average coating mass in gm/m2 |
---|---|---|---|---|
E2.8/2.8 | 2.8 | 4.9 | 5.6 | 4.9 |
Oil can |
---|
0.28 x 895/905/935 x 660 - Body size for edible oil |
0.28 x 765 x 510 - End size |
0.28 x 895/905/935 x 710 - Body size for cashew nut containers |
Temper and Hardness |
Hardness : 57 , +/-4 HR(30T) |
Temper : CA (57) |
HS Code | Unit |
---|---|
72084010 | KGS |
Steel Type | Thickness of thk part ,mm | Welding Process | Min temp 0 C |
---|---|---|---|
Mild and medium tensile steel | Upto 19 | MMA with low hydrogen electrode, Submerged arc, Gas metal arc, Cored wire | None |
20-38 | 10 | ||
39-64 | 66 | ||
Over 64 | 107 | ||
Mild Steel | Upto 19 | MMA with electrodes other than low hydrogen type | None |
20-38 | 66 | ||
39-64 | 107 | ||
Over 64 | 150 |
Plate Weight per Sheet | Plate Width & Length in M | PlateWeight per Sq. Ft. |
---|---|---|
314.8 | 7 (.1874) x 48 x 120 | 7.871 |
226.8 | 10 (.135) x 48 x 120 | 5.670 |
151.2 | 11 (.120) x 36 x 120 | 5.040 |
161.3 | 11 (.120) x 48 x 96 | 5.040 |
201.6 | 11 (.120) x 48 x 120 | 5.040 |
241.9 | 11 (.120) x 48 x 144 | 5.040 |
252.0 | 11 (.120) x 60 x 96 | 5.040 |
132.3 | 12 (.105) x 36 x 120 | 4.410 |
176.4 | 12 (.105) x 48 x 120 | 4.410 |
220.5 | 12 (.105) x 60 x 120 | 4.410 |
94.50 | 14 (.075) x 36 x 120 | 3.150 |
126.0 | 14 (.075) x 48 x 120 | 3.150 |
75.60 | 16 (.060) x 36 x 120 | 2.520 |
80.64 | 16 (.060) x 48 x 96 | 2.520 |
100.8 | 16 (.060) x 48 x 120 | 2.520 |
126.0 | 16 (.060) x 60 x 120 | 2.520 |
60.48 | 18 (.048) x 36 x 120 | 2.016 |
80.64 | 18 (.048) x 48 x 120 | 2.016 |
45.36 | 20 (.036) x 36 x 120 | 1.512 |
60.48 | 20 (.036) x 48 x 120 | 1.512 |
37.80 | 22 (.030) x 36 x 120 | 1.260 |
40.32 | 22 (.030) x 48 x 96 | 1.260 |
50.40 | 22 (.030) x 48 x 120 | 1.260 |
30.24 | 24 (.024) x 36 x 120 | 1.008 |
40.32 | 24 (.024) x 48 x 120 | 1.008 |
22.68 | 26 (.018) x 36 x 120 | .7560 |
30.24 | 26 (.018) x 48 x 120 | .7560 |
18.90 | 28 (.015) x 36 x 120 | .6300 |
Hole Centres mm | Hole Dia mm | Tck mm | O/A | Full Sheet Size mm | Finish |
---|---|---|---|---|---|
1.5 | 0.75 | 0.6 | 23% | 2000 x 1000 | 2B |
2 | 1 | 1.0 | 23% | 2000 x 1000 | 2B |
2.6 | 1.5 | 1.0 | 30% | 2000 x 1000 | 2B |
3.5 | 2 | 1.0 | 30% | 2000 x 1000 | 2B |
3.5 | 2 | 1.0 | 30% | 2000 x 1000 | 2B |
5 | 3 | 1.0 | 33% | 2000 x 1000 | 2B |
5.6 | 4 | 1.0 | 46% | 2000 x 1000 | 2B |
8 | 5 | 1.0 | 35% | 2000 x 1000 | 2B |
8 | 6 | 1.0 | 51% | 2000 x 1000 | 2B |
10 | 8 | 1,0 | 58% | 2000 x 1000 | 2B |
IS 2062 Plate Thickness(milimeter) | Width (milimeter) 1600 | 2500 | 1800 | 2800 | 2000 | 3000 | 2200 | 3200 |
---|---|---|---|---|---|---|---|---|
8 | 6300 9300 12500 | |||||||
10 | 6300 9300 12500 | |||||||
12 | 6300 8000 12500 | 7100 10000 | 6300 9300 12500 | |||||
14 | 5600 6300 7100 9000 9300 12500 | 5000 5600 6300 7100 8000 9000 12500 | 9300 | |||||
16 | 5000 6300 8000 9000 12500 | 5600 7100 8000 10000 | 7100 9300 9000 9300 12500 | 5600 7100 9000 9300 12500 | ||||
18 | 5600 7100 8000 10000 | 5600 7100 9300 | 5000 6300 9000 9300 10000 | 5600 6300 7100 8000 9000 9300 12500 | 5000 6300 8000 9000 12500 | |||
20 | 5600 7100 9300 | 5000 6300 9000 9300 10000 | 5000 5600 6300 7100 9000 9300 12500 | 5600 8000 9000 9300 | 5000 5600 6300 8000 9000 12500 | 5600 7100 8000 10000 | ||
22 | 5000 5600 6300 7100 9000 9300 | 5600 6300 8000 9000 9300 | 5000 5600 6300 8000 9000 12500 | 5000 5600 7100 8000 9300 | 5600 7100 8000 10000 | 5000 6300 7100 9300 10000 | ||
25 | 5000 5600 6300 8000 12500 | 5000 5600 7100 8000 | 5000 5600 7100 10000 | 6300 7100 12500 | 5000 6300 9000 9300 10000 | 6300 12500 | 5600 6300 8000 9000 9300 | 5600 6300 12500 |
28 | 5000 5600 7100 10000 | 6300 7100 12500 | 5000 6300 9000 9300 10000 | 5600 6300 10000 12500 | 5600 8000 9000 9300 | 5600 6300 10000 12500 | 5000 5600 7100 8000 | 5000 5600 9300 10000 |
32 | 5000 5600 9000 9300 10000 | 5600 6300 12500 | 5000 6500 8000 9000 | 5000 5600 9300 10000 | 5000 7100 8000 | 5000 9000 9300 10000 | 5000 6300 7100 12500 | 5000 8000 9000 10000 |
36 | 5000 5600 8000 9000 | 5000 5600 9300 10000 | 5000 7100 8000 | 5000 8000 9000 9300 | 6300 7100 12500 | 8000 9000 9300 | 5600 6300 12500 | 7100 8000 9000 |
40 | 5000 7100 8000 | 5000 9000 9300 10000 | 6300 7100 12500 | 7100 8000 9000 93000 10000 | 5600 6300 12500 | 7100 8000 | 5000 5600 10000 | 6300 7100 8000 |
45 | 6300 7100 12500 | 8000 9000 9300 | 5600 6300 12500 | 7100 8000 | 5000 5600 10000 | 6300 7100 | 5000 9300 10000 | 6300 7100 |
50 | 5600 6300 12500 | 7100 8000 | 5000 6500 9300 10000 | 6300 7100 | 5000 9000 9300 10000 | 5600 6300 7100 | 8000 9000 9300 | 5600 6300 |
56 | 5000 5600 9300 10000 | 6300 7100 | 5000 9300 10000 | 5600 6300 | 8000 9000 9300 | 5000 5600 | 7100 8000 | 5000 5600 |
63 | 4500 5000 9000 9300 10000 | 5600 6300 | 8000 9300 | 5000 5600 | 7100 8000 | 4500 5000 | 6300 7100 | 4500 5000 |
75 | 7100 8000 | 4500 5000 | 6300 7100 | 4500 5000 | 5600 6300 | 4500 | 5000 5600 | |
80 | 6300 7100 8000 | 4500 5000 | 5600 6300 7100 | 5000 5600 6300 | 4500 5000 5600 | |||
90 | 6300 | 5600 6300 | 5000 5600 | 5000 | ||||
100 | 5000 5600 6300 | 5000 5600 | 5000 | |||||
110 | 5000 5600 | 5000 | ||||||
120 | 4500 5000 |
Density | 7.85 g/cm3 |
Specification | Chemical composition (max) | Mechanical Properties | ||||||
---|---|---|---|---|---|---|---|---|
Mn | C | P | S | % Elongation guage length 5.65 So |
Tensile Properties Min. Mpa |
Nb+V+T | Yield Properties Min. Mpa |
|
IS-2062 Gr A (SK) | 1.5 | 0.23 | 0.050 | 0.050 | 23 | 410 | 0.20 | 240 |
IS-2062 Gr B (SK) | 1.5 | 0.20 | 0.045 | 0.045 | 23 | 410 | . | 240 |
SAIL-MA 300 | 1.5 | 0.25 | 0.055 | 0.055 | 20 | 440-560 | Maximum for all |
300 |
SAIL-MA 300 HI | 1.5 | 0.20 | 0.040 | 0.040 | 21 | 440-560 | 300 | |
SAIL-MA 350 | 1.5 | 0.25 | 0.040 | 0.040 | 20 | 490-610 | 350 | |
SAIL-MA 350 HI | 1.5 | 0.20 | 0.040 | 0.040 | 19 | 540-660 | . | 410 |
SAIL-MA 410 | 1.5 | 0.25 | 0.040 | 0.040 | 20 | 540-660 | . | 410 |
Product name | Laser Cutting Service |
---|---|
Usage | For Industrial |
Material | Mild steel (M S). |
Thickness | Up to 25 mm |
Size | Standard |
Products | Thickness (Inche) | Width - Carbon Steel (Inche) | Finish - Carbon Steel | Price |
---|---|---|---|---|
1 ft Length | ||||
HOT ROLLED NON ALLOY STEEL PLATES/SHEETSTO IS2062 GRADE A/B (DULY FORMED)H.S.CODE 72085210 2000MM X 6300MM X 6MM 17 NOS | 0.187 | 12 | Dry | $25.97 |
1/2 ft Length | ||||
MILD STEEL SLIP ON RAISED FACE PLATE FLANGES AS PER IS 2062 : 2011 GRADE E250 A, AS PER ASME B 16.5 CLASS 150 -80MM | 1 | 9 | Unpolished | $95.37 |
3 ft Length | ||||
HOT ROLLED NON ALLOY STEEL PLATES/SHEETSTO IS2062 GRADE A/B (DULY FORMED) 2000 MM X 6300 MM X 8 MM 25 NOS | 0.25 | 10 | Unpolished | $123.42 |
IS 2062 Grade A Plate | IS 2062 Grade B Mild Steel Plates |
Ms Is 2062 High Quality Plate | Ms IS 2062 Gr.A Plate |
IS 2062 Grade B Material | Structural Steel Is 2062 Gr B Plates |
IS 2062 E250 Steel Plate | IS 2062 E350 Steel Plate |
Mild Steel Is 2062 Gr.b Plates | Gr.A Mild Steel IS 2062 Plate |
IS 2062 Plates | Is 2062 Gr.B Ms Plates |
Mild Steel IS 2062 Gr.A High Quality Plates | MS IS 2062 Structural Plate |
IS 2062 Grade B Plate | Carbon Steel IS 2062 GR.B Plate |
Mild Steel Is 2062 Gr.b Cr Plates | IS 2062 Mild Steel Cr Plates |
IS 2062 Gr E250 Plate | IS 2062 Gr. B Structural Steel Plate |
IS 2062 E250br Plate | Mild Steel IS 2062 Gr.A High Quality Plate |
Mild Steel IS 2062 Gr.A Plates | Gr.A Mild Steel IS 2062 Sheet |
IS 2062 E250BR Plate | IS 2062 E250A Plate |
Gr.A IS 2062 Ms Plates | Mild Steel IS 2062 Gr.B Cr Plate |
Gr.A Ms IS 2062 High Quality Plates | Ms Is 2062 Cold Rolled Plate |
Mild Steel IS 2062 Plates | Mild Steel Gr.b Is 2062 Plate |
IS 2062 Ms Gr.A Chequered Plate | Is 2062 Ms Gr.b Chequered Plate |
Mild Steel IS 2062 Gr.A Cr Plates | Ms Hot Rolled Plates |
Ms Gr.A IS 2062 Cold Rolled Plate | Gr.b Is 2062 Ms Plates |
IS 2062 E350C Plate | IS 2062 E350A Plate |
Is 2062 Grade B Sheet | Ms Is 2062 Gr.b Plate |
Gr.b Mild Steel Is 2062 Plate | Mild Steel Is 2062 Gr.b High Quality Plates |
Check
Frequently supplied material IS 2062 Grade B Plate in below countries
IS 2062 Grade B Material
Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).
IS 2062 Gr E250 Plate
Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).
IS 2062 E250br Plate
USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.
Gr.A Mild Steel IS 2062 Plate
Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.
Is 2062 Grade B Sheet
Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.
MS IS 2062 Structural Plate
France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.