Carbon Steel Buttweld Elbow, Caps, Tee and Reducer Supplier in Mumbai

Carbon Steel Pipe Fittings Manufacturer in India

What Is Carbon Steel Pipe Fittings?
Carbon steel pipe fittings are high carbon content grade. The versatile fittings showcase moderate corrosion and oxidation resistance across stress-induced environments. The content of carbon dictates the strength of the fitting in the system. The robust carbon grade fittings are employed to effectively influence the flow of fluids and gases in high and low pressure applications. A carbon pipe fitting can be readily threaded or welded to subsequent grades following standard procedures.

What Are Carbon Steel Buttweld Fittings Used For?
Carbon steel fittings belong to a range of weldable pipe fittings. The grade of fittings are used to stop, reduce or change the direction of the flow across different environments. They are widely seen in use in domestic, industrial, and commercial applications. They are a common feature in construction, automobile, structural applications, and pipelines. The robust modules are also seen in sanitary applications where the subsequent application emits acids and reducing media.

  • A low temperature carbon steel fitting is utilized in low temDifference Between Low Temperature Carbon Steel Fittings And High Temperature Carbon Steel Pipe
    Carbon steel fittings are designed for use in different environmental temperatures and conditions.peratures. These fittings function well in cryogenic temperatures up to -46 degrees C.
  • A high temperature carbon fittings work well in high temperature setups spanning up to 540 degrees C.

Carbon Steel Concentric Vs Eccentric Reducer
Carbon steel reducers are used in the piping industry to connect grades of different shapes and sizes. Reducers are classified into concentric or eccentric types and both can be distinguished on key features.

  • A carbon steel concentric reducer helps in reducing the size of the piping grade from the center. A carbon steel eccentric reducer is employed to reduce the size of the piping module from its edges.
  • Concentric reducers are more common than eccentric reducers in the carbon grade.
  • Carbon steel concentric reducers showcase a matching centerline. An eccentric reducer has a mismatched centerline.
  • Concentric reducers allow for smooth passage of the flow, while an eccentric reducer can accumulate fluids if they are not aligned properly.

We are India's leading Carbon Steel Fittings Manufacturers and offers stub end, pipe cap and pipe bend in various sizes and thickness

Carbon Steel Pipe Fittings Specification

Specifications ASTM/ ASME A234/ SA234
Size Ranges From ½” NB upto 24″ NB in Schedule 160s, 40s, 10s, 80s, XXS.
Bending Radius Radius=8 D, 1.5D, 1 D, 2D, 5D, 3 D, 6D, 10D
Types Seamless | Welded | Fabricated
Size Range Seamless Butt-Weld Fitting: From 1/2″upto 10″
Welded ButtWeld Fitting: From 1/2″ upto 48″
Origin of CS Fittings manufacturers Russian, Indian, Korean, Japanese, European
Specialized manufacturer of 45º Elbows, Crosses, Tees, Reducers, Stub End, 90º Elbows, Pipe Bend, Pipe Cap
Process of Manufacturing Cast, Press, Push, Forge.
Dimension ASME B16.28 | ASME/ ANSI B16.9 | MSS-SP-43 | BS4504 | BS1560 | BS10
Thickness of Fitting Schedule10, Schedule 20, Schedule30, STD Schedule40, Schedule80, Schedule60, XS, Schedule100, Schedule120, Schedule140, Schedule 160, XXS available with NACE MR 01-75
Carbon Steel Pipe Fittings Manufacturers In India

Cs Pipe Fittings Price List

Products Type Fitting Pipe Size Price
PIPE FITTING CARBON STEEL SA 420 GR.WPL6 DN 400X350,SCH XS,CONCENTRIC REDUCER ,BUTT WELD M.C-CRL61614XSXS)(1PCS) Hex Head Bull Plug 1/4 in $18.08
1/2 in $23.77
3/4 in $28.54
1 in $36.65
CARBON STEEL SEAMLESS PIPE FITTING (90 ELBOW ASTM A234 WPB B16.9 SMLS SIZE 18 STD TOTAL PCS 48) Round Head Bull Plug 2 in $76.35
3 in $129.61
4 in $182.39
STEEL SEAMLESS PIPE FITTING (TEE ASTM A234 WPB B16.9SMLS SIZE 2X3/4 SCH80 TOTAL PCS 20) 45° Lateral Wye 1/2 in x 1/2 in x 1/2 in $299.36
3/4 in x 3/4 in x 3/4 in $279.48
1 in x 1 in x 1 in $389.93
1 1/2 in x 1 1/2 in x 1 1/2 in $515.22
2 in x 2 in x 2 in $640.54
PIPE FITTING CARBON STEEL SA 420 GR.WPL6 DN 300X200,SCH 120,ECCENTRIC REDUCER ,BUTT WELD E M.C-ERL612081212(2PCS) 90° Long Radius Elbow 1/2 in x 1/2 in $27.18
3/4 in x 3/4 in $27.18
1 in x 1 in $27.18
1 1/4 in x 1 1/4 in $27.18
3 1/2 in x 3 1/2 in $96.38
CARBON STEEL WELDED PIPE FITTING (CON. REDUCER ASTM A234 WPB B16.9 SMLS SIZE 10X6 SCH40 TOTAL PCS 20) 90° Short Radius Elbow 1 in x 1 in $43.65
1 1/4 in x 1 1/4 in $43.65
3 1/2 in x 3 1/2 in $148.73
1 1/2 in x 1 1/2 in $43.65
CARBON STEEL PIPE FITTING (ECC. REDUCER ASTM A234 WPB B16.9 SMLS SIZE 6X4 SCH40 TOTAL PCS 100) 45° Long Radius Elbow 1/2 in x 1/2 in $29.01
3/4 in x 3/4 in $29.01
1 in x 1 in $29.01
1 1/4 in x 1 1/4 in $29.01
3 1/2 in x 3 1/2 in $86.54

Types of Carbon Steel Pipe Fittings

Carbon Steel Buttweld Fittings

There are many benefits if you buy from Carbon Steel Buttweld Fittings Manufacturers, like high quality, best price and wide range.

Black Steel Straight Tees and Crosses
Black Steel Straight Tees and Crosses
Black Steel Straight Tees and Crosses
Black Carbon Steel Reducing Outlet Tees
Black Carbon Steel Reducing Outlet Tees
Black Carbon Steel Reducing Outlet Tees
E355 Steel Reducing Outlet Crosses
E355 Steel Reducing Outlet Crosses
E355 Steel Reducing Outlet Crosses
Killed Carbon Steel Equal Tee
Killed Carbon Steel Equal Tee
Killed Carbon Steel Equal Tee
ASME SA234 Reducing Tee
ASME SA234 Reducing Tee
ASME SA234 Reducing Tee
ASTM A234 Carbon Steel Equal Cross
ASTM A234 Carbon Steel Equal Cross
ASTM A234 Carbon Steel Equal Cross
SA234 Reducing Cross
SA234 Reducing Cross
SA234 Reducing Cross
Carbon Steel Reducer
Carbon Steel Reducer
Carbon Steel Reducer
Low Temp Carbon Steel Concentric Reducer
Low Temp Carbon Steel Concentric Reducer
Low Temp Carbon Steel Concentric Reducer
Low Temperature Carbon Steel Eccentric Reducer
Low Temperature Carbon Steel Eccentric Reducer
Low Temperature Carbon Steel Eccentric Reducer
Carbon Steel Stub End
Carbon Steel Stub End
Carbon Steel Stub End
Carbon Steel Elbow
Carbon Steel Elbow
Carbon Steel Elbow
Carbon Steel Return Bends
Carbon Steel Return Bends
Carbon Steel Return Bends
BS 6323 Part 3 Steel Lap Joint Stub Ends
BS 6323 Part 3 Steel Lap Joint Stub Ends
BS 6323 Part 3 Steel Lap Joint Stub Ends
Plain Carbon Steel Long Stubend
Plain Carbon Steel Long Stubend
Plain Carbon Steel Long Stubend
Q235b Carbon Steel Short Stubend
Q235b Carbon Steel Short Stubend
Q235b Carbon Steel Short Stubend
Q195 Low Carbon Steel Pipe Cap
Q195 Low Carbon Steel Pipe Cap
Q195 Low Carbon Steel Pipe Cap
Very High Carbon Steel End Cap
Very High Carbon Steel End Cap
Very High Carbon Steel End Cap
E235 Steel Collar
E235 Steel Collar
E235 Steel Collar
E470 Steel Swedge Nipple
E470 Steel Swedge Nipple
E470 Steel Swedge Nipple
E235 Steel Pipe Nipples
E235 Steel Pipe Nipples
E235 Steel Pipe Nipples
MS Barrel Nipple
MS Barrel Nipple
MS Barrel Nipple
Carbon Steel Pipe Bend
Carbon Steel Pipe Bend
Carbon Steel Pipe Bend
Carbon Steel Cap
Carbon Steel Cap
Carbon Steel Cap
Carbon Steel Cross
Carbon Steel Cross
Carbon Steel Cross
E315 Steel Reducing Nipple
E315 Steel Reducing Nipple
E315 Steel Reducing Nipple
E235 Material Lateral
E235 Material Lateral
E235 Material Lateral
Material E235+N Schedule 10S Fittings
Material E235+N Schedule 10S Fittings
Material E235+N Schedule 10S Fittings
E355 Steel Butt Weld Pipe Fittings Schedule 40S
E355 Steel Butt Weld Pipe Fittings Schedule 40S
E355 Steel Butt Weld Pipe Fittings Schedule 40S

ASTM A 234 Carbon Steel Tee

Check below product Carbon Steel Tee Manufacturer in India, we use only high quality & tested material to produce Carbon Steel Pipe Tee

EN 10297-1 Steel Schedule 10 Tee
EN 10297-1 Steel Schedule 10 Tee
EN 10297-1 Steel Schedule 10 Tee
ASTM A234 Lateral Tee
ASTM A234 Lateral Tee
ASTM A234 Lateral Tee
EN 10305-1 Steel Butt Weld Pipe Tee
EN 10305-1 Steel Butt Weld Pipe Tee
EN 10305-1 Steel Butt Weld Pipe Tee
ASTM A234 CS Y Tee
ASTM A234 CS Y Tee
ASTM A234 CS Y Tee
EN 10305-4 Fabricated Pipe Tee
EN 10305-4 Fabricated Pipe Tee
EN 10305-4 Fabricated Pipe Tee

ASTM A234 WPB Elbow

Why don't you directly contact a Carbon Steel Elbow Manufacturer in India? We offer an extensive range of CS Elbow and Carbon Steel Pipe Elbow in Mumbai, free sample before dispatch of complete order.

BS 6323-3 Grade Hfs 5 90° Long Radius Elbow
BS 6323-3 Grade Hfs 5 90° Long Radius Elbow
BS 6323-3 Grade Hfs 5 90° Long Radius Elbow
Black Steel 90° Short Radius Elbow
Black Steel 90° Short Radius Elbow
Black Steel 90° Short Radius Elbow
Black Carbon Steel 45° Long Radius Elbow
Black Carbon Steel 45° Long Radius Elbow
Black Carbon Steel 45° Long Radius Elbow
Killed Carbon Steel 45° Short Radius Elbow
Killed Carbon Steel 45° Short Radius Elbow
Killed Carbon Steel 45° Short Radius Elbow
CS 180° Long Radius Elbow
CS 180° Long Radius Elbow
CS 180° Long Radius Elbow
Low Temp Carbon Steel 180° Short Radius Elbow
Low Temp Carbon Steel 180° Short Radius Elbow
Low Temp Carbon Steel 180° Short Radius Elbow
Low Temperature Carbon Steel 1D Elbow
Low Temperature Carbon Steel 1D Elbow
Low Temperature Carbon Steel 1D Elbow
CS ASTM A234 1.5D Elbow
CS ASTM A234 1.5D Elbow
CS ASTM A234 1.5D Elbow
Plain Carbon Steel 3D Elbow
Plain Carbon Steel 3D Elbow
Plain Carbon Steel 3D Elbow
Q235b Carbon Steel 5D Elbow
Q235b Carbon Steel 5D Elbow
Q235b Carbon Steel 5D Elbow
E275 Steel Seamless Buttwelding 45° and 90° Elbows
E275 Steel Seamless Buttwelding 45° and 90° Elbows
E275 Steel Seamless Buttwelding 45° and 90° Elbows
Q195 Low Carbon Steel Welded Elbows
Q195 Low Carbon Steel Welded Elbows
Q195 Low Carbon Steel Welded Elbows
Very High Carbon Steel Seamless Buttwelding 180° Returns
Very High Carbon Steel Seamless Buttwelding 180° Returns
Very High Carbon Steel Seamless Buttwelding 180° Returns
Carbon Steel SCH 5 Elbow
Carbon Steel SCH 5 Elbow
Carbon Steel SCH 5 Elbow
E215 Steel SCH 10 Elbow
E215 Steel SCH 10 Elbow
E215 Steel SCH 10 Elbow
Mild Steel SCH 40 Elbow
Mild Steel SCH 40 Elbow
Mild Steel SCH 40 Elbow
A234 SCH 80 Elbow
A234 SCH 80 Elbow
A234 SCH 80 Elbow
Carbon Steel ASTM A243 Elbow
Carbon Steel ASTM A243 Elbow
Carbon Steel ASTM A243 Elbow

Carbon Steel Fittings Schedule Chart

CS Pipe Fittings Schedule Chart

ASTM A860 WPHY 42 Fittings Size Chart

CS Weldolet Sizes

RUN PIPE NPS RUN PIPE SCHEDULE WELDOLET DIMENSIONS
SIZE SCH. 10″ 2″ 12″ 3″ 16″ 4″ 18″ 6″ 20″ 8″ 24″ 14″
3″ STD-40
XS-80
84 91
XXS-160 101 119
2″ STD-40
XS-80
70
XXS-160 87
4″ STD-40
XS-80
97 103 111
XXS-160 114 132 144
STD-40 124 130 138 148
8″ XS-80 149 156 164 191 197
XXS-160 167 184 197 218 224
STD-40 218 176 183 191 205 210
6″ XS-80 124 130 138 165
XXS-160 141 159 171 192
STD-40 149 156 164 176 183
10″ XS-80 235 176 183 191 218 238
XXS-160 265 194 211 224 245 251
STD 245 202 251 208 216 228 255
14″ STD 259 218 267 224 232 245 251 270
XS 270 218 278 224 231 239 279 286
12″ XS 267 202 265 208 216 243 264
XXS-160 291 219 324 237 249 270 276
16″ STD 284 243 292 249 300 257 270 276 295
XS 293 243 303 249 319 257 284 305 306
20″ STD 335 294 343 300 351 308 356 321 376 327 346
XS 346 294 354 300 364 308 370 335 386 356 557
18″ STD 310 268 318 275 325 283 335 295 302 321
XS 321 268 329 275 338 283 352 310 330 332
24″ STD 386 345 394 351 402 359 406 372 411 378 446 397
XS 397 345 405 351 414 359 421 386 429 406 449 408

Carbon Steel Weld Fittings ASTM Standard

Carbon Steel (B/W) Fittings
Materials Specification Chart Size Chart Carbon steel Piping materials Schedule & Swg.
Carbon STeel A234 WPB Buttweld
Seamless
ANSI B16.9
15
to
500 Nominal Bore
CS Bend (Short & Short)
CS Elbow ( 90o,180o, 45o)
CS Tee (UnEqual & equal)
CS Reducer (Concentric & Eccentric)
CS CAP
CS Stubend (Short & Long)
CS Nipple (Barrel)
Schedule 40
to
Schedule XXs
A234 WPW Buttweld
Welded
ANSI B16.9
200
to
600 Nominal Bore
Schedule 10
to
schedule 80s
Low Temp Carbon Steel A403 B/W
ANSI B16.9
15 NB
to
300 NB
Sch. 5
to
Sch. 80s
A420 WPL 6 B/W
Welded
ANSI B16.9
200 NB
to
600 NB
Sch. 10
to
Sch. 80s

Carbon Steel Pipe Flanges Dimensions

Nom. Pipe Size ASTM A420 Carbon Steel 45° Elbows ASTM A420 Carbon Steel 90° Elbows ASTM A420 Carbon Steel 180° Return Long Radius
Long Radius 3R Long Radius Short Radius 3R XS STD
XS STD STD XS XS STD XXS SCH. 160 STD XS XS STD
½ .19 .09 .25 .18 .35
¾ .19 .09 .25 .19 .65 .40
1 .31 0.25 .50 .40 .75 .60 .25 1.00 .75
.50 0.38 .90 .60 1.38 1.00 .4 1.75 1.25
.69 .40 1.15 .90 1.50 1.80 .56 .75 2.39 1.88
2 1.19 .81 1.5 2.1 2.20 1.60 3.50 3.25 1.00 1.50 4.00 3.00 4.40 3.23
2.13 1.75 3.00 4.00 4.00 3.25 7.00 5.13 2.13 2.80 8.00 6.00 8.00 6.50
3 3.50 2.63 5.00 7.00 6.50 5.00 11.0 8.50 3.00 4.25 13.0 10.0 13.00 10.25
4.50 3.50 7.00 9.00 8.35 6.75 16.0 4.50 6.00 18.0 13.0 16.75 13.00
4 6.10 4.50 9.00 13.0 13.5 9.00 20.0 18.0 6.25 8.50 25.0 18.0 25.0 18.5
5 10.7 7.50 15.0 22.0 22.0 15.0 36.0 32.0 9.60 14.0 43.0 29.0 44.0 30.0
6 17.5 12.0 23.0 35.0 35.0 24.5 65.0 57.0 18.0 23.0 70.0 45.0 70.0 50.0
8 35.0 23.0 45.0 70.0 71.0 50.0 118 120 34.0 47.5 140 90.0 142 95.0
10 53.0 43.0 80.0 109 107 88.0 260 58.0 70.0 218 159 215 117
12 84.0 62.0 117 155 160 125 450 80.0 104 310 233 320 230
14 100 80.0 149 200 205 160 572 105 140 400 298 400 325
16 135 100 195 260 276 206 132 174 520 390 550 412
18 167 126 248 330 340 260 167 219 660 495 690 510
20 206 160 305 405 420 320 210 275 810 610 830 640
22 260 197 368 490 520 394 980 735 1040 787
24 300 238 438 585 600 460 298 392 1170 875 1200 890
26 365 275 515 685 729 550 1370 1030
30 488 367 685 915 975 734 1830 1370
36 706 531 985 1315 1412 1062 2630 1970

P.M. Metal is a industrial High Yield CS Long Radius Elbow Stockist in India since 2001, We are known for Quality Assurance and Reliable Delivery of large size 2LPE/ EPOXY coated Carbon Steel Tee, Concentric / Eccentric Reducer at factory price in India

Carbon Steel Buttweld Fittings Weight Chart

DN (Normal Pipe Size) For ASME B16.9 Schedule 10S Schedule 40S Schedule 80S
Elbow 90 Deg Elbow 45 Deg B16.9 Equal Tee Elbow 90 Deg Elbow 45 Deg B16.9 Equal Tee Elbow 90 Deg Elbow 45 Deg B16.9 Equal Tee
8 0.02 0.01 0.03 0.03 0.02 0.06 0.04 0.03 0.07
10 0.03 0.02 0.05 0.03 0.02 0.03 0.06 0.04 0.09
15 0.06 0.03 0.09 0.08 0.04 0.10 0.10 0.05 0.14
20 0.07 0.03 0.13 0.08 0.04 0.17 0.11 0.05 0.20
25 0.14 0.08 0.28 0.15 0.11 0.29 0.22 0.14 0.38
32 0.23 0.11 0.49 0.26 0.17 0.59 0.40 0.23 0.68
40 0.30 0.17 0.68 0.40 0.23 0.86 0.51 0.29 1.02
50 0.50 0.25 0.85 0.70 0.4 1.28 0.91 0.59 1.59
65 0.85 0.48 1.41 1.40 0.77 2.19 1.81 0.99 3.13
80 1.25 0.63 1.77 2.20 1.08 3.31 2.97 1.50 4.45
90 1.70 0.75 2.67 2.83 1.42 4.08 4.00 2.00 5.44
100 2.10 1.08 3.46 4.47 2.09 5.27 6.18 2.81 7.71
150 5.45 2.72 8.07 10.89 5.44 10.99 16.32 8.16 13.61
200 10.20 5.33 15.65 21.54 10.77 20.91 33.11 16.56 28.12
250 18.15 9.75 26.46 38.56 19.27 35.38 51.71 25.86 49.90
300 25.80 13.62 39.46 59.42 29.71 62.14 79.38 39.69 83.91
Carbon Steel Fittings Manufacturers In India

DN (Normal Pipe Sizes) For ASME B16.9 Schedule 10S Schedule 40S Schedule 80S
Eccentric Pipe Reducer Concentric Pipe Reducer Reducing And Unequal Tee Eccentric Pipe Reducer Eccentric Pipe Reducer Reducing And Unequal Tee Eccentric Pipe Reducer Concentric Pipe Reducer Reducing And Unequal Tee
40x.25 0.19 0.19 0.60 0.26 0.26 0.76 0.34 0.34 0.90
50x25 0.28 0.28 0.73 0.40 0.40 1.10 0.54 0.54 1.37
50x40 0.31 0.31 0.76 0.45 0.45 1.15 0.59 0.59 1.43
80x.50 0.55 0.55 1.56 1.00 1.00 2.91 1.79 1.79 3.91
100x50 0.78 0.78 2.94 1.50 1.50 4.48 1.95 1.95 6.55
100x80 0.87 0.87 3.04 1.74 1.74 4.64 2.33 2.33 6.79
150x80 1.82 1.82 6.86 3.95 3.95 9.68 5.51 5.51 11.57
150x100 1.96 1.96 7.10 4.07 4.07 11.94 5.96 5.96 11.97
200x100 3.01 3.01 13.46 6.55 6.55 17.98 9.23 9.23 24.18
200x150 3.19 3.19 14.08 6.74 6.74 18.82 10.12 10.12 25.31

Cs Fittings Grade

Material Fitting
CS
Alloy
High-Temp
A234 Gr WP1
A234 Gr WP11
A234 Gr WP12
A234 Gr WP22
A234 Gr WP5
A234 Gr WP9
CS A234 Gr WPA
A234 Gr WPB
A234 Gr WPC
CS
Alloy
Low-Temp
A420 Gr WPL6
A420 Gr WPL3

CS Weldolet Schedule XS Size Chart

CS Weldolet Schedule XS Sizes

Weldolet Size (inches) C A D B Weldolet weight in lbs
1/2 15/16 3/4 5/8 1.375 0.15
3/4 1.1875 7/8 13/16 1.625 0.25
1 1.4375 1.0625 1.03125 2 0.4
1 1/14 1.75 1.25 1.375 2.4375 0.7
1.5 2 1.3125 1.625 2.875 0.9
2 2.5625 1.5 2.0625 3.5 1.6
2 1/2 3 1.625 2.4375 4.0625 2.5
3 3.6875 1.75 3.0625 4.8125 4.1
3 1/2 3.875 2 3.5625 5.375 5.1
4 4.75 2 4 6 7.5
5 5.5625 2.25 5.0625 7.125 9.5
6 6.6875 3.0625 6.0625 8.875 15
8 8.6875 3.875 7.625 10.625 32
10 10.4375 3.5 9.75 12.875 46
12 13 3.9375 11.75 15.1875 61
14 14.3125 4.125 13 16.6875 75
16 16.5 4.4375 15 18.875 115
18 18.625 4.6875 17 21.125 130
20 20.8125 5 19 23.375 187
24 25.125 5.5 23 27.875 316
26 27.25 5.75 25 30.125 370

Mild Steel Fittings Applications

  • Gas Processing
  • Petrochemicals
  • Off-Shore Oil Drilling Companies
  • Chemical Equipment
  • Pulp & Paper Industry
  • Pharmaceutical Equipment
  • Power Generation
  • Sea Water Equipment

Low Carbon Steel Fittings Density

Physical Properties Imperial Metric
Density 0.284 lb/in3 7.87 g/cc

End Cap Pressure Rating

Pressure-Temperature ratings for ASME B16.9 Carbon Steel Buttweld Pipe Fittings (psig)
Temperature Ratings Pressure Class
150 300
1 1/4 - 2 Inches 1/4 - 1 Inches 2 1/2 - 3 Inches
(oC) (oF)
-29 to 66 -20 to 150 300 1500 2000 1000
93 200 265 1350 1785 910
121 250 225 1200 1575 825
149 300 185 1050 1360 735
177 350 150 900 1150 650
204 400 - 750 935 560
232 450 - 600 725 475
260 500 - 450 510 385
288 550 - 300 300 300
Well Established manufacturer of Low Carbon Steel Buttweld Pipe Fittings, We have hugh inventory of ASME B16.9 Carbon Steel Pipe Bend in 3D and 5D radius in Mumbai

Carbon Pipe FittingsTemperature Rating

Nominal Size
(Milimeter)
Sch Number. Wall Thk.
(Milimeter)
Temp in celcius 
-29 - 38 205 260 350 370 400 4301)
Max. Allowable Stress (MPa) 
137.8 137.8 130.2 117.1 115.7 89.6 74.4
15 STD 40 2.77 34416 34416 32528 29255 28910 22372 18589
XS 80 3.73 48092 48092 45466 40878 40396 31260 25969
160 4.78 62830 62830 59378 53404 52777 40837 33929
XXS 7.47 98245 98245 92836 83507 82522 63857 53053
20 STD 40 2.87 28070 28070 26526 23860 23578 18245 15158
XS 80 3.91 39418 39418 37247 33506 33106 25617 21283
160 5.56 58152 58152 54955 49429 48843 37799 31398
XXS 7.82 83107 83107 78539 70643 69809 54024 44881
25 STD 40 3.38 26251 26251 24804 22310 22048 17060 14173
XS 80 4.55 36283 36283 34285 30862 30474 23584 19595
160 6.35 52481 52481 49594 44606 44082 34112 28339
XXS 9.09 77030 77030 72793 65476 64704 50070 41595
50 STD 40 3.91 16378 16378 15468 13925 13759 10645 8847
XS 80 5.54 23653 23653 22351 20105 19871 15378 12774
160 8.74 38866 38866 36731 33037 32652 25266 20987
XXS 11.07 50793 50793 48003 43173 42670 33017 27429
32 STD 40 3.56 21614 21614 20421 18369 18155 14049 11672
XS 80 4.85 30178 30178 28518 25651 25348 19616 16295
160 6.35 40596 40596 38364 34505 34099 26389 21924
XXS 9.70 64601 64601 61045 54906 54266 41988 34884
40 STD 40 3.68 19444 19444 18375 16529 16329 12636 10550
XS 80 5.08 27402 27402 25900 23295 23019 17811 14800
160 7.14 39738 39738 37599 33816 33416 25858 21483
XXS 10.16 58779 58799 55547 49966 49374 38205 31742
65 STD 40 5.16 17914 17914 16929 15227 15048 11644 9674
XS 80 7.01 24818 24818 23447 21097 20849 16129 13401
160 9.53 34615 34615 32714 29420 29076 22503 18693
XXS 14.02 53081 53081 50159 45116 44585 34498 28662
125 STD 40 6.55 11561 11561 10921 9825 9708 7510 6243
XS 80 9.53 17060 17060 16122 14503 14331 11093 9212
120 12.70 23130 23130 21855 19657 19430 15034 12492
160 15.88 29407 29407 27787 24997 24701 19113 15881
XXS 19.05 35897 35897 33926 30516 30158 23337 19388
80 STD 40 5.49 15558 15558 14969 13222 13063 10108 8399
XS 80 7.62 21986 21968 20780 18693 18472 14290 11871
160 11.13 33079 33079 31253 28111 27780 21497 17859
XXS 15.24 46976 46976 44392 39928 39459 30536 25369
150 STD 40 7.11 10550 10550 9928 8924 8819 6828 5370
XS 80 10.97 16474 16474 15571 14007 13842 10707 8895
120 14.27 21745 21745 20553 18448 18265 14138 11747
XXS 160 18.26 28325 28325 26768 24074 23784 18410 15296
STD 40 6.02 13187 13187 12464 11210 11079 8571 7124 5739
XXS 17.12 40348 40348 38129 34298 33892 26230 21786 17549
XS 80 8.56 19058 19058 18010 16198 16012 12388 12094 8289
120 11.13 25190 25190 23805 21407 21159 16371 13601 10995
160 13.49 31019 31019 29310 26368 26058 20160 16750 13208
200 20 6.35 7138 7138 6745 6063 5994 4637 3852
30 7.04 7924 7924 7489 6732 6656 5147 4279
STD 40 8.18 9246 9246 8737 7855 7765 6008 4995
60 10.31 11741 11741 11093 9977 9860 7627 6339
XS 80 12.70 14572 14572 13766 12388 12237 9474 7868
100 15.09 17452 17452 16488 14834 14655 11341 9426
120 18.26 21345 21345 20174 18148 17935 13876 11527
140 20.62 24308 24308 22971 20656 20415 15799 13125
XXS 22.23 26334 26334 24877 22386 22124 17115 14221
160 23.01 27340 27340 25838 23240 22964 17769 14765
250 20 6.35 5698 5698 5388 4844 4789 3707 3080
30 7.8 7028 7028 6642 5974 5905 4568 3796
STD 40 9.27 8385 8385 7923 7131 7048 5450 4527
XS 60 12.7 11596 11596 10955 9853 9736 7538 6263
80 15.09 13863 13863 13098 11781 11644 9012 7483
100 18.26 16922 16922 15992 14386 14214 10996 9136
120 21.44 20036 20036 18934 17032 16825 13022 10817
XXS 140 25.4 23998 23998 16474 20394 20153 15599 12960
160 28.58 27229 27229 25734 23143 22875 17700 14703
300 20 6.35 4795 4795 4534 4072 4024 3114 2591
30 8.38 6359 6359 6008 5402 5540 4134 3431
STD 9.53 7241 7241 6842 6153 6084 4706 3914
40 10.31 7854 7854 7421 6676 6601 5015 4244
XS 12.70 9722 9722 9191 8268 8165 6318 5250
60 14.27 10969 10969 10363 9322 9212 7131 5925
80 17.48 13525 13525 12850 11492 11362 8792 7303
100 21.44 16736 16736 15819 14227 14062 10879 9040
XXS 120 25.4 20015 20015 18913 17011 16811 13008 10804
140 28.58 22682 22682 21435 19278 19051 14744 12244
160 33.32 26740 26740 25273 22730 22461 17383 14441
350 10 6.35 4361 4361 4120 3707 3665 2831 2356
20 7.92 5457 5457 5161 4644 4589 3548 2949
STD 30 9.53 6580 6580 6222 5595 5533 4279 3555
40 11.13 7717 7717 7310 6559 6477 5016 4168
XS 12.70 8833 8833 8351 7510 7421 5739 4768
60 15.09 10541 10541 9963 8964 8861 6855 5691
80 19.05 13421 13421 12684 11410 11272 9723 7248
100 23.83 16949 16949 16019 14407 14242 11017 9157
120 27.79 19933 19933 18837 16943 16743 12960 10762
140 31.75 22964 22964 21703 19519 19292 14931 12402
160 35.71 26051 26051 24618 22144 21883 16936 14069
500 10 6.35 3038 3038 2873 2574 2556 1977 1640
STD 20 9.53 4582 4582 4327 3893 3852 2976 2474
XS 30 12.70 6139 6139 5801 5216 5154 3989 3314
40 15.09 7317 7317 6911 6215 6146 4754 3948
60 20.62 10080 10080 9522 8564 8468 6552 5443
80 26.19 12898 12898 12188 10962 10831 8385 6966
100 32.54 16171 16171 15287 13746 13580 10514 8730
120 38.10 19085 19085 18037 16226 16033 12409 10307
140 44.45 22475 22475 21242 19106 18879 14614 12140
160 50.01 25450 25450 24094 21675 21421 16577 13766
450 10 6.35 3383 3383 3197 2873 2839 2198 1826
20 7.92 4230 4230 3996 3597 3555 2749 2287
STD 9.53 5099 5099 4816 4334 4286 3314 2756
XS 30 11.13 5967 5967 5643 5071 5016 3879 3225
12.70 6835 6835 6456 5808 5739 4437 3686
40 14.27 7696 7696 7276 6545 6463 5002 4155
60 19.05 10349 10349 9784 8799 8695 6725 5588
80 23.83 13043 13043 12326 11086 10955 8475 7042
100 29.36 16219 16219 15323 13787 13622 10542 8757
120 34.93 19464 19464 18389 16543 16350 12650 10507
140 39.67 22282 22282 21056 18941 18713 11483 12030
160 45.24 25638 25638 24225 21793 21531 16660 13842
400 10 6.35 3810 3810 3603 3238 3197 2474 2060
20 7.92 4768 4768 4507 4051 4004 3100 2577
STD 30 9.53 5746 5746 5429 4885 4830 3734 3100
XS 40 12.70 7703 7703 7283 6545 6470 5009 4126
60 16.66 10176 10176 9618 8654 8550 6614 5498
80 21.44 13208 13208 12478 11224 11093 8585 7131
100 26.19 16274 16274 15378 13835 13670 10576 8785
120 30.96 19409 19409 18341 16481 16302 12616 10480 8440
140 36.53 23130 23130 21855 19657 19430 15034 12492
160 40.49 25824 25824 24404 21952 21697 16784 13945
600 10 6.35 2529 2529 2391 2150 2129 1647 1364
STD 20 9.53 3810 3810 3603 3238 3197 2474 2060
XS 12.70 5097 5097 4816 4334 4286 3314 2756
30 14.27 5739 5739 5423 4878 4823 3734 3100
40 17.48 7055 7055 6670 5994 5925 4589 3810
60 24.61 10018 10018 9467 8516 8420 6511 5409
80 30.96 12691 12691 12002 10783 10659 8254 6856
100 38.89 16102 16102 15220 13690 10528 10466 8695
120 46.02 19223 19223 18168 16336 16150 12491 10383
140 52.37 22048 22048 20835 18741 18520 14331 11906
160 59.54 25279 25279 23888 21489 21235 16433 13649

CS Weldolet Schedule 40 Size Chart

CS Weldolet Schedule 40 Sizes

Weldolet Size (inches) C A D B Weldolet weight in lbs
1/2 15/16 3/4 5/8 1 3/8 0.15
3/4 1 3/16 7/8 13/16 1 5/8 0.25
1 1 7/16 1 1/16 1 1/32 2 0.4
1 1/4 1 3/4 1 1/4 1 3/8 2 3/8 0.7
1 1/2 2 1 5/16 1 5/8 2 7/8 0.8
2 2 9/16 1 1/2 2 1/16 3 1/2 1.5
2 1/2 3 1 5/8 2 7/16 4 1/6 2.25
3 3 11/16 1 3/4 3 1/16 4 13/16 3.75
3 1/2 3 7/8 2 3 9/16 5 3/8 5
4 4 3/4 2 4 6 6.7
5 5 9/16 2 1/4 5 1/16 7 1/8 8.5
6 6 11/16 2 3/8 6 1/16 8 1/2 14
8 8 11/16 2 3/4 7 15/16 10 3/8 28
10 10 13/16 3 1/16 10 12 9/16 39
12 12 13/16 3 3/8 12 14 7/8 65
14 14 1/16 3 1/2 13 1/4 16 1/8 70
16 16 1/16 3 11/16 15 1/4 18 1/4 92
18 18 5/8 4 1/16 17 1/4 20 3/4 125
20 20 1/16 4 5/8 19 1/4 23 1/16 175
24 25 1/8 5 3/8 23 1/4 27 7/8 280
30 30 7/16 5 3/8 29 1/4 34 1/16 440
36 36 1/2 5 3/8 35 1/4 34 1/16 1180

Sch 10 Carbon Steel Weld Fittings Chemical Composition

Element Content (%)
Manganese, Mn 2
Iron, Fe Balance
Molybdenum, Mo 3-4
Carbon, C 0.03
Phosphorous, P 0.045
Chromium, Cr 18-20
Silicon, Si 1
Nickel, Ni 11-15
Sulfur, S 0.03

AISI
OR SAE
P MAX C S MAX MN
1005* .040 .06 max .050 .35 max
1006* .040 .08 max .050 .25/.40 max
1008 .040 .10 max .050 .30/.50 max
1010 .040 .08/.13 max .050 .30/.60 max
1011* .040 .08/.13 max .050 .60/.90 max
1012 .040 .10/.15 max .050 .30/.60 max
1013* .040 .11/.16 .050 .50/.80
1015 .040 .13/.18 .050 .30/.60
1016 .040 .13/.18 .050 .60/.90
1017 .040 .15/.20 .050 .30/.60
1018 .040 .15/.20 .050 .60/.90
1019 .040 .15/.20 .050 .70/1.00
1020 .040 .18/.23 .050 .30/.60
1021 .040 .18/.23 .050 .60/.90
1022 .040 .18/.23 .050 .70/1.00
1023 .040 .20/.25 .050 .30/.60
1025 .040 .22/.28 .050 .30/.60
1026 .040 .22/.28 .050 .60/.90
1029 .040 .25/.31 .050 .60/.90
1030 .040 .28/.34 .050 .60/.90
1035 .040 .32/.38 .050 .60/.90
1037 .040 .32/.38 .050 .70/1.00
1038 .040 .35/.42 .050 .60/.90
1039 .040 .37/.44 .050 .70/1.00
1040 .040 .37/.44 .050 .60/.90
1042 .040 .40/.47 .050 .60/.90
1043 .040 .40/.47 .050 .70/1.00
1044 .040 .43/.50 .050 .30/.60
1045 .040 .43/.50 .050 .60/.90
1046 .040 .43/.50 .050 .70/1.00
1049 .040 .46/.53 .050 .60/.90
1050 .040 .48/.55 .050 .60/.90
1053 .040 .48/.55 .050 .70/1.00
1055 .040 .50/.60 .050 .60/.90
1059* .040 .55/.65 .050 .50/.80
1060 .040 .55/.65 .050 .60/.90
1064* .040 .60/.70 .050 .50/.80
1065* .040 .60/.70 .050 .60/.90
1069* .040 .65/.75 .050 .40/.70
1070 .040 .65/.75 .050 .60/.90
1074* .040 .70/.80 .050 .50/.80
1075* .040 .70/.80 .050 .40/.70
1078 .040 .72/.85 .050 .30/.60
1080 .040 .75/.88 .050 .60/.90
1084 .040 .80/.93 .050 .60/.90
1085* .040 .80/.93 .050 .70/1.00
1086* .040 .80/.93 .050 .30/.50
1090 .040 .85/.98 .050 .60/.90
1095 .040 .90/1.03 .050 .30/.50

Mild Steel Buttweld Fittings Mechanical Properties

Properties Metric Imperial
Poisson’s ratio 0.27-0.30 0.27-0.30
Tensile Properties 595 MPa 86300 psi
Hardness, Rockwell B 85 85
Modulus of elasticity 200 GPa 29000 ksi
Elongational at break (in 50 mm) 55% 55%
Yield Properties 260 MPa 37700 psi
There are many benefits if you buy from CS Pipe Fittings manufacturers like high quality and best price, also refer Low Temp CS 90 Degree Elbow dimensions, sizes and weight chart of Schedule 10/ 40

Cast Steel Pipe Fittings Yeild Chart

Properties Imperial Metric
Poissons ratio (typical for steel) 0.27-0.30 0.27-0.30
Tensile strength, ultimate 92100 psi 635 MPa
Elongation at break (in 50 mm) 10% 10%
Tensile strength, yield 71100 psi 490 MPa
Hardness, Brinell 187 187
Modulus of elasticity 0.27-0.30 0.27-0.30
Hardness, Knoop (converted from Brinell hardness) 209 209
Bulk modulus (typical for steel) 20300 ksi 140 GPa
Hardness, Rockwell B (converted from Brinell hardness) 90 90
Shear modulus (typical for steel) 11600 ksi 80 GPa
Hardness, Vickers (converted from Brinell hardness) 196 196
Reduction of area 45% 45%
Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only) 10 10
Machinability (based on AISI 1212 steel. as 100 machinability) 60 60

MSS-SP-43 Carbon Steel Fittings Pressure Rating

Nominal Pipe Size Wall Thickness* ** ** Working Pressure– lbs per square inch at the Fahrenheit Temperature Indicated
750 -20 to 650 *** 800 700
1 0.179 2253 2610 1879 2496
20 0.5 492 570 410 545
24 0.5 401 465 334 444
18 0.5 543 630 453 602
42 0.5 232 269 193 258
48 0.5 203 235 169 226
30 0.5 326 377 270 362
36 0.5 272 314 225 301
3 0.3 1528 1770 1274 1693
3 1/2 0.318 1437 1665 1198 1592
4 0.337 1372 1590 1144 1521
5 0.375 1269 1470 1058 1406
1/2 0.147 2615 3030 2181 2898
3/4 0.154 2240 2595 1868 2482
6 0.432 1269 1470 1058 1406
8 0.5 1165 1350 972 1291
10 0.5 919 1065 766 1018
12 0.5 777 900 648 861
1 1/4 0.191 1670 1935 1391 1851
1 1/2 0.2 1566 1815 1306 1736
2 0.218 1437 1665 1198 1592
2 1/2 0.276 1670 1935 1393 1851
14 0.5 699 810 583 774
16 0.5 608 705 507 674

Nominal Pipe Size Wall Thickness Sizes * ** Working Pressure– lbs per square inch at the
Fahrenheit Temperature Indicated
700 -20 to 650 *** 800 750
1 1/4 0.14 1019 1065 766 919
1 1/2 0.145 960 1005 723 867
2 0.154 861 900 648 777
1/2 0.109 1621 1695 1220 1463
3/4 0.113 1392 1455 1046 1256
1 0.133 1506 1575 1134 1359
2 1/2 0.203 1162 1215 874 1048
3 0.216 1047 1095 788 945
3 1/2 0.226 975 1020 734 880
4 0.237 932 975 702 841
14 0.375 545 570 410 492
16 0.375 473 495 356 427
8 0.322 731 765 550 660
10 0.365 688 720 518 621
12 0.375 602 630 453 543
18 0.375 430 450 354 388
20 0.375 387 405 291 349
5 0.258 846 885 637 764
36 0.375 198 220 148 178
42 0.375 181 189 136 163
48 0.375 158 165 118 143
6 0.28 803 840 604 725
24 0.375 315 330 237 284
30 0.375 254 265 190 229

Low Carbon Steel Pipe Fittings Gasket Chart

NPS (Normal Pipe Sizes) Gasket Indied Daimter (I.D.)
Gasket Outsdie Daimeter (O.D.)
400 LB 150 LB 600 LB 300 LB 900 LB
1/2 0.84 2.125 1.875 2.125 2.125 2.50
3/4 1.06 2.625 2.25 2.625 2.625 2.75
1 1.31 2.875 2.625 2.875 2.875 3.125
1 1/4 1.66 3.25 3 3.25 3.25 3.50
1 1/2 1.91 3.75 3.375 3.75 3.75 3.875
2 2.38 4.375 4.125 4.375 4.375 5.625
2 1/2 2.88 5.125 4.875 5.125 5.125 6.50
3 3.50 5.875 5.375 5.875 5.875 6.625
4 4.50 7.00 6.875 7.625 7.125 8.125
5 5.56 8.375 7.75 9.50 8.50 9.75
6 6.62 9.75 8.75 10.50 9.875 11.375
8 8.62 12.00 11 12.625 12.125 14.125
10 10.75 14.125 13.375 15.75 14.25 17.125
12 12.75 16.50 16.125 18.00 16.625 19.625
Cs Pipe Fittings Manufacturers In India

ASTM A420 WPL6 Buttweld Fittings Size Chart

Products Sizes
CS Nipples Upto 4"
CS Stub Ends 1/2" NB to 14" NB
CS Couplings Upto 4"NB
CS Cups 1/2" NB to 14" NB
CS Reducers 1" NB to 14" NB
CS Socket Weld Upto 2" NB
CS Elbow 1/2" NB to 14" NB
CS Tees 1" NB to 14" NB

Carbon Steel Buttweld Pipe Fittings Equivalent Grades

  • Sch 40 steel pipe with an (I.D.) of 0.172 ft & 52.5 millimeter then the Length of Equivalent the globe valve in terms of the steel pipe is 320 x 0.172 = 55 ft & 320 x 52.5 = 16800 millimeter.

Carbon Steel Pipe Fittings-Seamless

NACE MR 01-75 | ASTM A262E | PMI TESTED
CERTIFICATE EN 10204/3.1B

GRADE SCHEDULE NOM. PIPE SIZE
ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A420 WPL6 SCH 40S 1/2″ – 12″
SCH 10S 1/2″ – 12″
SCH 80S 1/2″ – 12″

Carbon Steel Pipe Fittings-Welded

GRADE SCHEDULE NOM. PIPE SIZE
ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A420 WPL6 SCH 40S 1/2″ – 12″
SCH 10S 1/2″ – 24″

Low Temp Pipe Fittings Tolerance

BW Fittings ANSI B16.9 Tolerance (45 And 90 degree) Elbow, End Cap, Tee, Reducer) Reducer
& Long Lap Joint
Stub End
90 Deg. & 45 Deg.
Elbow and Tee
Cap
Fitting Dimension (NPS) Outside Daimeter
Diameter
at Bevel
Inside
Diameter
at End
Wall Thick T Over-all
Length H
Center-to-End
Dimension
A ,C ,B
Over-all
Length F
1/2 to 2-1/2 +0.06 Not less than 87.5%
of nominal Thickness
+/- 0.06 +/- 0.06 +/- 0.12
-0.03
3 to 3-1/2 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.12
4 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.12
5 to 8 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.25
10 to 18 +0.16 +/- 0.12 +/- 0.09 +/- 0.09 +/- 0.25
-0.12
20 to 24 +0.25 +/- 0.19 +/- 0.09 +/- 0.09 +/- 0.25
-0.19
26 to 30 +0.25 +/- 0.19 +/- 0.19 +/- 0.12 +/- 0.38
-0.19
32 to 48 +0.25 +/- 0.19 +/- 0.19 +/- 0.19 +/- 0.38
-0.19

Seamless Steel Pipe Fitting Features

  • Good load bearing capacity
  • High tensile strength
  • Excellent versatility and weldability
Manufacturer of Welded CS Pipe Fittings and Carbon Steel Lap Joint and Short Stub End Sch 40 according to ANSI B16.9

Black Carbon Steel Pipe Fittings Service

Black Carbon Steel Pipe Fittings Service
  • Hardness Test
  • Mechanical Testing Such as Tensile of Area
  • Positive Material Identification – PMI Testing
  • Chemical Analysis – Spectro Analysis
  • Micro and MacroTest
  • Flattening Test
  • Flaring Test
  • Pitting Resistance Test
  • Intergranular Corrosion (IGC) Test

Killed Carbon Steel Pipe Fittings HS Code

HSN Code Product Description
730799 Other:
7307 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
73079990 Other
730791 Flanges:
730793 Butt welding fittings:
73079190 Other
73079390 Other

Carbon Steel ASTM A243 Fittings Inventory

Carbon Steel Pipe Fittings Carbon Steel Split Tee
Cs Pipe Fittings Seamless Steel Pipe Fitting
Carbon Steel Fittings Butt Weld Pipe Reducer
Schedule 10 Carbon Steel Elbow Low Temperature Carbon Steel Pipe Cap
Carbon Steel Weld Fittings Carbon Steel Tube Fittings
Sch 40 Carbon Steel Pipe Flanges Very High Carbon Steel Pipe Nipples
Carbon Steel Buttweld Fittings Sch 10 Carbon Steel Swage Fittings
Carbon Steel Press Fittings Carbon Steel Seamless Pipe Fittings
Cs Fittings Carbon Steel Schedule 80 Pipe Fittings
Carbon Steel Tee Low Carbon Steel Schedule 10 Fittings
Mild Steel Fittings Carbon Steel Swagelok Fittings
Carbon Steel Reducer Carbon Steel Sch 40 Fittings
Carbon Steel Buttweld Caps Schedule 10 Carbon Steel Pipe Fittings
Mild Steel Elbow Carbon Steel Threaded Pipe Fittings
Carbon Steel Nipples Carbon Steel Tubing Fittings
Low Carbon Steel Fittings Low Temperature Carbon Steel Tee Fittings
Cs Ptfe Lined Pipes Carbon Steel Bulkhead Fittings
Carbon Pipe Fittings Carbon Steel Bw Fittings
Carbon Steel Pipe And Fittings Large Bore Carbon Steel Pipe Fittings
Sch 10 Carbon Steel Weld Fittings Large Diameter Carbon Steel Pipe Fittings
Mild Steel Buttweld Fittings Carbon Steel Flanged Fittings
Cast Steel Pipe Fittings Very HighCarbon Steel Grooved Fittings
Butt Weld Pipe Cap Carbon Steel Gas Fittings
Carbon Steel Reducing Tee Galvanized Carbon Steel Fittings
Weldbend Pipe Fittings Carbon Steel Cam And Groove Fittings
Carbon Steel Concentric Reducer Low Carbon Steel Hydraulic Fittings
Carbon Steel End Cap Carbon Steel Hose Fittings
Mild Steel Reducer High Yield Carbon Steel Fittings
Carbon Steel Stub Ends Ibr Carbon Steel Pipe Fittings
Carbon Steel Pipe Elbow Killed Carbon Steel Fittings
Sch40 Cs Pipe Elbow Low Temp Carbon Steel Fittings
Carbon Steel Weldolet Low Temperature Carbon Steel Fittings
Low Carbon Steel Pipe Fittings 3000 Lb Carbon Steel Fittings
Mild Steel Coupling Carbon Steel Pipe Fittings Material
Carbon Steel Buttweld Pipe Fittings Carbon Steel Npt Fittings
Low Temp Pipe Fittings Normalized Carbon Steel Fittings
Carbon Steel Equal Tee Carbon Steel Victaulic Fittings

Searching for

Carbon Steel Pipe Fittings supplier in your country? Checklist of material we export in the following areas.

Application Projects
P.M. Metal Logo

Cs Pipe Fittings

Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).

Application Projects
P.M. Metal Logo

Carbon Steel Fittings

Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).

Application Projects
P.M. Metal Logo

Carbon Steel Elbow

USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.

Application Projects
P.M. Metal Logo

Carbon Steel Buttweld Fittings

Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.

Application Projects
P.M. Metal Logo

Carbon Steel Tee

Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.

Application Projects
P.M. Metal Logo

Carbon Steel Reducer

France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.