PM Metal Logo
Contact
Pipes & Tubes

Stainless Steel 316L Pipe

  • Home
  • Stainless Steel 316L Pipe

ASTM A312 TP316L Seamless Tube and SS 316L Welded Pipe Supplier in India

Stainless Steel 316L Pipe

What Is Stainless Steel 316l Pipe
Stainless steel 316l pipe is a low carbon austenitic alloy. The pipes in this grade are designed with a superior chemical composition of chromium, nickel coupled with molybdenum. The outstanding composition gives these modules enhanced corrosion and oxidation resistance. The pipes are resistant against carbide precipitation and can be welded in place easily following standard welding procedures.

What Is L In 316l Stainless Steel Pipe
The L in austenitic stainless steel 316l pipe grade signifies the content of lower carbon within the pipe.

Different Between Stainless Steel 316l Seamless And Welded Pipe
Grade 316l pipes are generally designed in welded and seamless configurations. Both these piping components can be distinguished based on certain features.

  • Stainless steel 316l seamless pipes are designed by passing hot steel billets through a metal grade. A welded pipe configuration is produced by welding pieces of sheets or strips to precisely shape the module.
  • Seamless pipes have superior strength and load-bearing capacity when compared to a standard welded grade pipe.
  • Stainless steel 316l welded pipes are comparatively cheaper than a SS 316ti seamless pipe grade. 

ASTM A312 Gr Tp316l Pipe Vs ASME Sa 312 Grade 316 Pipe
ASTM and ASME are important standards that play a pivotal role in manufacturing the pipes in the 316 grade. Both the grade are nearly identical but can be differentiated on certain aspects.

  • ASME Sa 312 Grade 316 pipe comes under a standard that specifies design codes and standards for different pressure-rated applications. ASTM A321 Gr Tp316l pipe covers shapes, sizes, and structural qualities of different piping items.
  • ASTM grade covers approximately 12,000 or more standards, while ASME covers nearly 600 technical standards.

Different Between Stainless Steel 316l seamless Pipe and SS 316l erw pipe

  • Stainless steel 316l erw pipe is manufactured by welding metal longitudinally. SS 316l seamless pipe is manufactured by passing hot billets through extruded metal.
  • Seamless pipes are expensive; however, they have a higher load-bearing capacity than erw pipes.

What Is 316l Stainless Steel Used For
Stainless steel 316l grade is commonly seen in the following industries.

  • Chemical and food processing
  • Petrochemical
  • Potable water supply
  • Pharmaceutical equipment
  • Architectural systems
  • Offshore and marine applications

Distributor of High Quality SA 312 TP 316L Material and Stainless Steel 316L Tube for the petro and chemical industry, we supply Stainless Steel 316L Pipe with MTR Certification

Table of Content

ASTM A312 TP316L Stainless Steel Seamless Pipe Price List FOB Mumbai India

Products Standards Steel Grade Specifications Coating FOB Mumbai
OD WT Length USD/ TON
INCH MM SCH MM M
316L Stainless Steel Seamless Pipes ASTM A312

316L

 1/4" 13.72
 S-40 2.24 6.0 Pickling $ 5070
ASME SA312 TP316L Stainless Steel Seamless Pipe ASME SA312 TP316L 3/8" 17.14 S-40 2.31 6.0 Pickling $ 5070
ASTM A269 TP 316L Stainless Steel SMLS Pipe ASTM A 312 TP 316L 1/2" 21.34 S-40 2.77 6.0 Pickling $ 5000
316L Stainless Steel SMLS Pipe A312 Grade 316L 3/4" 26.67 S-40 2.87 6.0 Pickling $ 4861
SS GOST 03Ch17N14M3 Seamless Pipe SA312 Gr. 316L 1" 33.40 S-40 3.38 6.0 Pickling $ 4722
SS Grade F316L Seamless Pipe ASTM A312M Gr 316L 1.5" 48.26 S-40 3.68 6.0 Pickling $ 4722
Stainless Steel 316L SMLS Pipe ASME SA312 UNS S31603 2" 60.32 S-40 3.91 6.0 Pickling $ 4722
SS UNS S31603 SMLS Pipe A312 1.4404 2.5" 73.02 S-40 5.16 6.0 Pickling $ 4722
150# ANSI SS 316L Seamless Pipe A 312 GR TP316L 3" 88.90 S-40 5.49 6.0 Pickling $ 4722
SS 316L SMLS Pipe SA312 316L 4" 114.30 S-40 6.02 6.0 Pickling $ 4722
ASTM A312 TP 316L Seamless Pipe ASTM A312 SUS 316L 6" 168.28 S-40 7.1 6.0 Pickling $ 4861

316L Stainless Steel Pipe Specifications

Specification and Grade ASTM/ ASME A 312/ SA 312
Pipes Sch. Schedule120, Schedule80, Schedule40, Schedule30, Schedule20, XS, STD, Schedule160, Schedule60, XXS, Schedule80, Schedule140
Outside Diameter (OD) 1/8" To 30″NB Inch
Different Types LSAW/ ERW / Welded /Seamless / Fabricated Pipes
Dimension Table ASTM, ASME and API
most popular for Stainless Steel 316 Large Diameter Pipe
Available Sizes 1/2″ NB to 16″ NB
common Pipes length Single Random & Double Random, Cut Length

erw pipes Sizes Metric

 1/2″ NB to 24″ NB
Pipes End Types Plain End, Beveled End, Theaded
Sizes Available of efw pipes 6″ NB to 100″ NB
basic Form of pipes Hydraulic, Round Form Etc

SS 316L Pipe Chemical Composition

ASTM A312 S C Cr Mn Mo Si Ni P N
TP316L min. - - 16.0 - 2.0 - 10.0 - -
max. 0.03 0.08 18.0 2.0 3.0 0.75 14.0 0.045 0.10

Stainless Steel 316L Pipe Mechanical Properties

ASTM A312 Elongation (% in 50mm) min Tensile Stress (MPa) min Yield Stress 0.2% Proof (MPa) min Hardness
Brinell (HB) max Rockwell B (HR B) max
TP316L 40 515 205 217 95

Check ASME B36.10M WNR. 1.4404 Polished Pipe and Stainless Steel 316L Tube Specification, Thickness & Schedule Chart, Supplier of 316L SS ERW Pipe and ASME SA 312 Grade 316L Round Tubes in custom cut to length sizes according to ASME B36.10/ B36.19

316L SS Welded Pipe Equivalent Grades

STANDARD SS 316L
UNS S31603
ASTM A312
JIS SUS 316L
ASME SA 312
AFNOR Z3CND17-11-02 / Z3CND18-14-03
WERKSTOFF NR. / DIN 1.4404 / 1.4435

ASTM A312 TP 316L ERW Pipe Testing method

Stainless Steel 316L Pipe Testing method

316L Stainless Steel Pipe Yield Strength

GRADE Yield Properties
316L 170
PED 2014/68/EU and IBR certified ASTM A312 TP 316L Round Pipe and Stainless Steel 316L Seamless Pipe Supplier in Mumbai, Get WNR. 1.4404 Polished Tubes from 6.35 mm OD To 152 mm OD

Stainless Steel Seamless 316L Pipe Roughness

MATERIAL SURFACE ABSOLUTE ROUGHNESS COEFFICIENT
Ε MM
Drawn Copper/ Brass 0.0015
Aluminum Alloy, Lead 0.001 - 0.002
316L Stainless Steel 0.015

Creep Properties of ASME SA 312 Grade 316L Round Pipe

1% Elongation1) for Rupture2) for
Temperature °C 1,000 h N/mm2 10,000 h N/mm2 10,000 h N/mm2 100,000 h N/mm2 1,000 h N/mm2
800 18 18 10 7 35
600 100 130 90 80 170
900 10 8.5 4 3 15
700 45 40 30 18 80

UNS S31603 Pipe Hardness

GRADE BRINELL HARDNESS (HB) MAX ROCKWELL B HARDNESS (HR B) MAX
316L 217 95

WNR. 1.4404 Tube Applications

316L Stainless Steel Pipe Applications
  • Retorts, muffles, annealing cover
  • Kilns
  • Radiant Tubes
  • Saggers
  • Heat Exchangers
  • Food processing equipment
  • Coal gasifier internal component
  • Conveyor belts, oven linings, furnace parts, rollers, fans

Types of ASTM A312 Gr TP 316L Polished Pipe

Stainless Steel 316L Tube
Stainless Steel 316L Tube
Stainless Steel 316L Tube
ASTM A312 TP 316L ERW Pipe
ASTM A312 TP 316L ERW Pipe
ASTM A312 TP 316L ERW Pipe
Marine Grade 316L Stainless Steel Tubing
Marine Grade 316L Stainless Steel Tubing
Marine Grade 316L Stainless Steel Tubing
2 inch 316L Stainless Steel Pipe
2 inch 316L Stainless Steel Pipe
2 inch 316L Stainless Steel Pipe
A312 Gr 316L Round Pipe
A312 Gr 316L Round Pipe
A312 Gr 316L Round Pipe
SA312 Type 316L Stainless Steel Pipe
SA312 Type 316L Stainless Steel Pipe
SA312 Type 316L Stainless Steel Pipe
Stainless Steel 316L Schedule 40 Pipe
Stainless Steel 316L Schedule 40 Pipe
Stainless Steel 316L Schedule 40 Pipe
316L Exhaust Pipe
316L Exhaust Pipe
316L Exhaust Pipe
SS 316L Seamless Pipe
SS 316L Seamless Pipes
SS 316L Seamless Pipes

AISI 316L Pipe Pressure Rating Chart

Check below 316l tubing pressure rating for seamless or welded and drawn, fully annealed stainless steel tubing products conforming to ASTM A312.

Pipe Size
(inches)		 Pipe Schedule Temperature (°F)
100 200 300 400 500 600 650 700 750
4" 80 2213 1909 1715 1577 1466 1397 1355 1328 1314
1" 40 3048 2629 2362 2171 2019 1924 1867 1824 1810
5" 40 1342 1158 1040 956 889 847 822 805 797
1" 80 4213 3634 3265 3002 2791 2659 2580 2528 2501
8" 40 1073 926 832 765 711 678 657 644 637
1" 160 6140 5296 4759 4375 4068 3876 3761 3684 3646
4" 40 1531 1321 1187 1091 1014 967 938 919 909
1.5" 40 2257 1947 1750 1608 1496 1425 1383 1354 1340
5" 80 1981 1709 1535 1411 1312 1250 1213 1189 1176
1.5" 80 3182 2744 2466 2267 2108 2009 1949 1909 1889
4" 160 3601 3106 2791 2566 2386 2273 2206 2161 2138
1.5" 160 4619 3984 3580 3291 3060 2916 2829 2772 2743
6" 80 1913 1650 1483 1363 1267 1208 1172 1148 1136
2" 40 1902 1640 1474 1355 1260 1201 1165 1141 1129
8" 160 3175 2738 2460 2262 2103 2004 1944 1905 1885
2" 80 2747 2369 2129 1957 1820 1734 1682 1648 1631
8" 80 1692 1459 1311 1205 1121 1068 1036 1015 1005
2" 160 4499 3880 3486 3205 2980 2840 2755 2699 2671
10" 40 974 840 755 694 945 615 596 584 578
3" 40 1806 1558 1400 1287 1196 1140 1106 1084 1072
10" 80 1609 1388 1247 1147 1066 1016 986 966 956
3" 80 2553 2202 1979 1819 1691 1612 1564 1532 1516
3" 160 3840 3312 2976 2736 2544 2424 2352 2304 2280
5" 160 3414 2945 2646 2433 2262 2155 2091 2049 2027
6" 160 3289 2836 2549 2343 2179 2076 2014 1973 1953
6" 40 1219 1052 945 869 808 770 747 732 724
10" 160 3147 2714 2439 2242 2085 1986 1927 1880 1868

316L Stainless Steel Exhaust Pipe Allowable Stress

SPECIFICATION A-312 SA-312
Product Shape Welded pipe Seamless & Welded pipe
SS Grade TP316L TP316L
UNS designation S31603 S31603
Nominal Composition 16Cr-12Ni-2Mo 16Cr-12Ni-2Mo
Sizes/ Thickness [mm] - -
III-Applic. and Maximum temperature limit [°C] NP 427
P Number 8 8
I-Applic. and Maximum temperature limit
[°C]		 454 454
Group Number 1 1
VIII-1-Applic. and Maximum temperature limit [°C] 454 454
Minimum Tensile
Strength
[MPa]		 485 485
XII-Applic. and Maximum temperature limit [°C] 343 343
Minimum Yield
Strength
[MPa]		 170 170
External Pressure
Chart No.		 HA-4 HA-4

SS grade 1.4404 Pipe Material Temperature Rating

GRADE SPECIFIC HEAT 0-100 °C (J/KG.K) MEAN CO-EFF OF THERMAL EXPANSION (ΜM/M/°C) ELEC RESISTIVITY (NΩ.M) THERMAL CONDUCTIVITY TEMPERATURE (W/M.K)
0-100 °C 0-538 °C 0-315 °C AT 100 °C AT 500 °C
316L 500 15.9 17.5 16.2 740 16.3 21.5

1.4404 SS 316L SCH 10 Pipe Weight Chart

Nominal size [inches] Wall thickness [inches] Wall thickness [mm] Outside diameter [inches] Outside diameter [mm] Weight [lb/ft] Weight [kg/m]
1/8 0.095 2.41 0.405 10.3 0.31 0.47
1/4 0.119 3.02 0.54 13.7 0.54 0.8
1/2 0.147 3.73 0.84 21.3 1.09 1.62
3/4 0.154 3.91 1.05 26.7 1.47 2.2
1 0.179 4.55 1.315 33.4 2.17 3.24
1 1/4 0.191 4.85 1.66 42.2 3 4.47
1 1/2 0.2 5.08 1.9 48.3 3.63 5.41
2 0.218 5.54 2.375 60.3 5.02 7.48
2 1/2 0.276 7.01 2.875 73 7.66 11.41
3 0.3 7.62 3.5 88.9 10.25 15.27
3 1/2 0.318 8.08 4 101.6 12.5 18.63
4 0.337 8.56 4.5 114.3 14.98 22.32
5 0.375 9.53 5.563 141.3 20.78 30.97
6 0.432 10.97 6.625 168.3 28.57 42.56
8 0.5 12.7 8.625 219.1 43.39 64.64
10 0.594 15.09 10.75 273 64.43 96.01
12 0.688 17.48 12.75 323.8 88.63 132.08
14 0.75 19.05 14 355.6 106.13 158.1
16 0.844 21.44 16 406.4 136.61 203.53
18 0.938 23.83 18 457 170.92 254.55
20 1.031 26.19 20 508 208.87 311.17
24 1.125 30.96 24 610 296.58 442.08

Marine grade 316L Stainless Steel Tubing Sizes

316L SS Pipe Size In Inch

OD
mm		 Sch WT
mm		 Kg/m in.
13.72 10S 1.65 0.50 1/4
13.72 40S 2.24 0.64 1/4
13.72 80S 3.02 0.81 1/4
17.15 10S 1.65 0.64 3/8
17.15 40S 2.31 0.86 3/8
17.15 80S 3.20 1.12 3/8
21.34 10S 2.11 1.02 1/2
21.34 40S 2.77 1.29 1/2
21.34 80S 3.73 1.65 1/2
26.67 10S 2.11 1.30 3/4
26.67 40S 2.87 1.71 3/4
26.67 80S 3.91 2.23 3/4
33.40 10S 2.77 2.13 1
33.40 40S 3.38 2.54 1
33.40 80S 4.55 3.29 1
33.40 160 6.352) 4.30 1
42.16 10S 2.77 2.73 1¼
42.16 40S 3.56 3.44 1¼
42.16 80S 4.85 4.53 1¼
42.16 160 6.352) 5.69 1¼
48.26 10S 2.77 3.16 1½
48.26 40S 3.68 4.11 1½
48.26 80S 5.08 5.49 1½
60.33 10S 2.77 3.99 2
60.33 40S 3.91 5.52 2
60.33 80S 5.54 7.60 2
60.33 160 8.742) 11.29 2
73.03 10S 3.05 5.35 2½
73.03 40S 5.16 8.77 2½
73.03 80S 7.01 11.59 2½
88.90 10S 3.05 6.56 3
88.90 40S 5.49 11.47 3
88.90 80S 7.62 15.51 3
88.90 160 11.132) 21.67 3
101.60 10S 3.05 7.53 3½
101.60 40S 5.74 13.78 3½
101.60 80S 8.08 18.92 3½
114.30 10S 3.05 8.50 4
114.30 40S 6.02 16.32 4
114.30 80S 8.56 22.67 4
114.30 160 13.492) 34.05 4
141.30 40S 6.55 22.10 5
141.30 80S 9.53 31.44 5
141.30 160 15.882) 49.87 5
168.28 10S 3.4 14.04 6
168.28 40S 7.11 28.69 6
168.28 80S 10.97 43.21 6
168.28 120 14.27 54.75 6
168.28 160 18.262) 68.59 6
219.08 40S 8.18 43.20 8
219.08 80S 12.7 65.63 8
219.08 120 18.23 91.30 8
219.08 160 23.012) 112.97 8

ASTM A312 TP316L Material Tube Sizes In Mm

316L Stainless steel Pipe Wall Thickness Sizes ( O.D.)
.010 1/16" , 1/8" , 3/16"
.020 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012 1/8"
.016 1/8" , 3/16"
.028 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"
Looking for 316L Stainless Steel Tubing and SS 316L Schedule 40 Pipe material for High temperature applications? Call now, we also stock Sumitomo, Jindal and Sandvik Stainless Steel 316L Pipe and AISI 316L Tubing in 3/4"-24" size range

ASTM A312 Grade TP316L Tubing Processing / Welding

ASTM A312 Grade TP316L Tubing Processing / Welding

SS 316L Pipe HSN Code

GRADE COUNTRY ASTM A312 Gr TP316L Seamless Pipe HS CODE
SS 316L Pipe Maldives 73042400
United Arab Emirates (UAE) 73041990
Singapore 73049000
Qatar 73041990
Italy 73044100
Saudi Arabia (KSA) 73049000
Oman 73049000

A312 TP316L Pipe Schedule Chart

1/8" IPS(.405"O. D.) 3 1/2" IPS( 4.000"O. D.)
SCH 40, 80 SCH 10, 40, 80, 160, XXH
1/4" IPS(.540"O. D.) 4" IPS(4.500"O. D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
3/8" IPS(.675"O. D.) 5" IPS( 5.563"O. D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
1/2" IPS(.840"O. D.) 6" IPS(6.625"O. D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050"O. D.) 8 ” IPS(8.625"O. D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′O. D.) 10" IPS(10.750"O. D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660"O. D.) 12" IPS(12.750"O. D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900"O. D.) 14" IPS(14.000"O. D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375"O. D.) 16" IPS(16.000"O. D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875"O. D.) 18" IPS (18.000"O. D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500"O. D.)
SCH 5, 10, 40, 80, 160, XXH

Stainless Steel 316L Tube Pressure Gauge

Pipes O.D.
(in.)		 Wall Thickness of Pipes/Tubes (inches)
.028 .035 .049 .065 .083 .095 .109 .120
Working Pressure (psig)
3/8 3100 4400 6100
1/8 7900 10100
3/4 2200 3000 4000 4600
1/4 3700 4800 7000 9500
1 2200 2900 3400 3900 4300
5/16 3700 5400 7300
1/2 2300 3200 4400

Fractional Sizes of Maximum Allowable Working Pressure (Psi)

Pipes OD Wall Thickness (Inches)
.010 .012 .016 .020 .028 .035 .049 .065 .083 .095 .109 .120
3/8 3,530 5,107 7,029
1/16 6,422 7,872 10,768 13,484
1/2 2,595 3,721 5,078 6,699
1/8 6,422 9,325 11,823
5/8 2,051 2,927 3,970 5,200 6,056
3/16 4,081 5,935 7,630 11,005
7/8 1,446 2,051 2,764 3,592 4,161 4,842 5,391
1/4 4,305 5,518 8,053 10,946
1 5,040 7,140 9,595 12,445 14,390 16,715 18,585
3/4 1,696 2,412 3,259 4,249 4,933 5,755 6,422

Metric Sizes of Maximum Allowable Working Pressure (Bar)

Corrosion-resistance ASME SA 312 Grade 316L Tube and AISI 316L Schedule 10 Pipe custom length cutting service at NO EXTRA COST, We Supply 316L Schedule 40 stainless steel pipe and SS 316L Seamless Tubing according to ASME, ASTM, and API standards
Pipes OD Wall Thickness (Inches)
0.5 0.6 0.7 0.8 1.0 1.2 1.5 1.6 1.8 2.0 2.2 2.5 3.0
12 169 215 262 335 360 411 464
3 464 567 672 775 965
14 182 222 282 303 345 389 433 500 612
4 335 411 491 567 723 873
16 158 192 244 262 298 335 372 430 528
6 310 360 464 567 723 775
18 140 169 215 230 262 294 326 377 464
8 227 262 335 411 528 567
22 113 137 173 186 211 236 262 301 369
10 206 262 320 411 442
25 99 120 152 162 184 206 228 262 320

Tolerances of ASTM A312 316L Stainless Tubing

  • up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / - 0.79 mm
  • 10 thru 18 = + 2.37 mm / - 0.79 mm | 20 thru 24 = + 3.18 mm / - 0.79 mm
WALL THICKNESS LENGTH ss 316l pipe weight calculator

All Diameters = - 12.5%

+ tolerance not specified

+ 6.40 mm / - 0 mm

Weight = + 10% / - 1.5%

We are the stockist of Baotou Steel Union, TPCO and Baosteel in Mumbai

Baotou Steel Union

Baotou Steel Union

Inner Mongolia
TPCO

TPCO

China
Baosteel

Baosteel

Shanghai, China.

Inventory of SS 316L Pipe

Stainless Steel 316L Pipe Stainless Steel 316L Tube
SS 316L Seamless Pipe A312 TP316L Smls
Sa 312 316l Pipe A312 TP 316L Material
316L SS Welded Pipe Astm A312 316l Stainless Tubing
ASTM A312 TP 316L ERW Pipe 2 inch 316L Stainless Steel Pipe
Astm A312 Gr Tp316l Pipe A312 Gr TP 316L Welded Pipe
316L Stainless Steel Seamless Tubing A312 Type 316L ERW Pipe
ASME SA 312 Grade 316L Round Pipe A312 Gr 316L Round Pipe
UNS S31603 Pipe A312 316L Pipe
Ss316l Seamless Pipe Sa312 Tp316l Stainless Pipe
WNR. 1.4404 Tube Sa-312-316L Hollow Pipe
ASTM A312 Gr TP 316L Polished Pipe SA 312 TP 316L Schedule 40 Pipe
AISI 316L Pipe SA 312 Gr 316L Polished Pipe
316L Stainless Steel Exhaust Pipe SA312 Type 316L Stainless Steel Pipe
SS grade 1.4404 Pipe Material Stainless Steel 316l Welded Pipe
1.4404 SS 316L SCH 10 Pipe Stainless Steel 316L Schedule 40 Pipe
Marine grade 316L Stainless Steel Tubing Stainless Steel 316L Seamless Pipe
316L Tube Heat Exchanger 316L Exhaust Pipe
ASTM A312 TP316L Material SS 316L ERW Pipe
ASTM A312 Grade TP316L Tubing 316l schedule 80 pipe
ASTM A312 Gr TP316L Seamless Pipe A312 TP316L Pipe
Astm A312 Gr Tp316l Pipe Ss316l Seamless Pipe
Products
Other
Industry
  • PM Metal Industry
  • PM Metal Industry
  • PM Metal Industry
  • PM Metal Industry

Check

the list of countries where we supplied ASTM A312 SS 316L Pipe Manufacturers in India

Application Projects
P.M. Metal Logo

Stainless Steel 316L Pipe

Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).

Application Projects
P.M. Metal Logo

SS 316L Seamless Pipe

Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).

Application Projects
P.M. Metal Logo

Stainless Steel 316L Tube

USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.

Application Projects
P.M. Metal Logo

A312 Type 316L ERW Pipe

Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.

Application Projects
P.M. Metal Logo

A312 316L Pipe

Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.

Application Projects
P.M. Metal Logo

SA 312 TP 316L Schedule 40 Pipe

France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.

© 2022 All Rights Reserved by P.M. Metal.