6061 Aluminum Flat Bar and 7075 T6 Aluminum Rod Stock Supplier in Mumbai

Aluminium Round Bar

What is Aluminium Round Bar and Aluminium Rod?
Aluminium round bar and rod are used interchangeably in the metal industry. These items can be distinguished based on certain features.

  • Aluminium round bar is designed with a uniform cross-section area that is smaller in size compared to its actual length. Aluminium is straight in alignment and can be shaped in circular cross sections.
  • A rod in this grade is completely sealed without any openings. An Aluminium round bar is designed with a hollow opening.

7075 Aluminum Round Bar and 6061 Aluminum Round Bar
Aluminium round bar is a high-strength module that is available in two common grades, namely 7075 and 6061. These bars can be only compared if they are heat-treated in a desired configuration.

  • The 7075 aluminium round bar showcases enhanced strength over the 6061 aluminium round bar.
  • Round bars of the 6061 grade can be welded and machined more precisely than the 7075 round bar
  • Aluminium 6061 round bar has higher thermal conductivity than a 7075 round bar.
  • An aluminium 7075 round bar melts at a slightly lower temperature than a 6061 grade.

Aluminium Threaded Rod vs Aluminium Welding Rod

  • An aluminium threaded rod is produced with threads on its interior that correspond to the subsequent modules. A threaded rod can be dismantled or detached from the component easily.
  • An Aluminum welding Rod is utilized to weld metal components in place. A welded rod is permanent and cannot be dismantled easily.

What are Aluminium Bar used for?
Aluminium bars are either extruded or rolled making them an ideal choice for use in a range of industries. These versatile bars are widely seen in use in machines, equipment parts, structural components, frames, architecture, engineering, roofs, doors, and more. In certain cases, the bars act as a finished ingredient and are used in construction and heavy-duty applications.

Manufacturer and supplier of 6063 Hex Bar, 7075t6 Aluminum Bright Bar Bar as per ASTM B211 specificaton, check standards, size and dimension of Cold Drawn Al Bar

Aluminium Solid Bar Specification

Standard Specification ASTM/ ASME B221 / SB221
Length 100 upto 3000 mm Long & Above
Dimensions Chart ASME, AISI, JIS, BS, ASTM, DIN, EN
Surface Finish Bright Polished, NO.4 Finish, Black, Matt Finish, Rough Turned, BA Finish
Aluminium Hollow Round Bar Sizes 5 upto 500 mm
Tolerance K11, H12, H8, H9, K9, H10, H11, K10, K12, H13, or as per clients’ requirements
Diameter 0.1 upto 100 mm
Form Square, Rectangle, Forging, Round, Billet, Hex, Ingot, Etc.

Aluminium Round Bar Price In India

Choose Aluminium Round Bar Price Per Kg available in many grades and shapes at High Quality 6061 Aluminum Round Bar Price

Products Width and Length Alloy Type - Aluminum Temper Finish Price
2.5 [63.5MM] DIA. L168 2014A-T6511 ALUMINIUM ALLOY ROUND BAR (FOR AIRCRAFT) 1/2 in x 12 in 3003 H14 (1/2 Hard) Mill $0.48 / each
ALUMINIUM ROUND BAR 173-001195-00 ALLOY 6061 TEMPER T6511 DIA.49 LENGTH 800MM (81 PCS) 1/2 in x 12 in 6061 T6511 Mill $1.44 / each
2860-0140-75 ALU ROUND EN AW-2011 T6 75 CA 3 MTR PRESSED (ALUMINIUM - BAR) 1/2 in x 48 in 6063 T52 Unpolished $5.19 / each
ALUMINIUM ALLOY ROUND BARS AA7075-F P.O.NO: 2/20/FG/410(AIRCRAFT RAW MATERILAS) 1/2 in x 72 in 6061 T6511 Mill $6.51 / each
4 DIA 6061 T4 ASTM B211 (ALUMINIUM ROUND BAR) (2 PCS - 133 INCHES) 5/8 in x 96 in 6063 T52 Mill $7.55 / each
ALUMINIUM ROUND BARS AICUMGPB (EN AW-2007), CAST WITH HOMOGENIOUS TREATMENT 250MM X 1000 MM (7 PCS) (ACTUAL USER NOT FOR 3/4 in x 36 in 6101 T61 Unpolished $3.26 / each
2024 T3511 FILE AERO (ALUMINIUM ROUND BARS = 9 PCS) 3/4 in x 48 in 6063 T52 Unpolished $5.39 / each
ALUMINIUM ALLOY EXTRUDED PRODUCTS : ROUND BAR (AsPerInvoice) 3/4 in x 72 in 6101 T61 Unpolished $5.37 / each
Aluminium Round Bar rivet (8mm x 50mm) 3/4 in x 96 in 6063 T52 Mill $7.76 / each
ALUMINIUM SOLID ROUND BAR SIZE-DIA 50 MM X 3 MTR LONG 1 in x 6 in 2024 T4 Mill $11.22 / each
ALUMINIUM BARS,RODS & PROFILES-ALUMINIUMHEIRLOOM ROUND HAND ROAD LEN 96 1782510 1 in x 6 in 6061 T6511 Mill $1.50 / each

Types of Half Round Aluminum Bar

Aluminium Polished Round Bar
Aluminium Polished Round Bar
Aluminium Polished Round Bar
Aluminum T-Bar
Aluminum T-Bar
Aluminum T-Bar
4032 Aluminum Triangle Bar
4032 Aluminum Triangle Bar
4032 Aluminum Triangle Bar
6061 Aluminum Flat Bar
6061 Aluminum Flat Bar
6061 Aluminum Flat Bar
7075 T6 Aluminum Bright Bar
7075 T6 Aluminum Bright Bar
7075 T6 Aluminum Bright Bar
6063 Aluminum Hollow Bar
6063 Aluminum Hollow Bar
6063 Aluminum Hollow Bar
7075 Round Bar
7075 Round Bar
7075 Round Bar
1100 Aluminum Threaded Bar
1100 Aluminum Threaded Bar
1100 Aluminum Threaded Bar
Aluminium 6061 T6 Half Round Bar
Aluminium 6061 T6 Half Round Bar
Aluminium 6061 T6 Half Round Bar
6063 Rods
6063 Rods
6063 Rods
Solid Aluminum Hexagonal Bar
Solid Aluminum Hexagonal Bar
Solid Aluminum Hexagonal Bar
Aluminium Bronze Rebar
Aluminium Bronze Rebar
Aluminium Bronze Rebar
2618 Aluminum Cold Drawn Bar
2618 Aluminum Cold Drawn Bar
2618 Aluminum Cold Drawn Bar
Aluminium Hot Rolled Bar
Aluminium Hot Rolled Bar
Aluminium Hot Rolled Bar
Aluminium 7075 Precision Ground Stock
Aluminium 7075 Precision Ground Stock
Aluminium 7075 Precision Ground Stock
ASTM B221 Aluminium Rectangular Bar
ASTM B221 Aluminium Rectangular Bar
ASTM B221 Aluminium Rectangular Bar
WERKSTOFF NR. 3.1254 Half-Round Bar
WERKSTOFF NR. 3.1254 Half-Round Bar
WERKSTOFF NR. 3.1254 Half-Round Bar
ASTM B221 Aluminium Rod
ASTM B221 Aluminium Rod
ASTM B221 Aluminium Rod

Aluminium Round Bar Weight Chart

Round Bar
Size Kgs / Mtr Kgs / Foot Size Kgs / Mtr Kgs / Foot Size Kgs / Mtr Kgs / Foot
3mm 0.055 0.017 20milimeter 2.470 0.753 3" 35.762 10.900
1/8" 0.062 0.019 22milimeter 2.979 0.908 3-1/4" 41.996 12.800
5/32" 0.095 0.029 7/8" 3.038 0.926 3-1/2" 48.772 14.850
4mm 0.098 0.030 24milimeter 3.543 1.080 3-3/4" 55.780 17.001
3/16" 0.141 0.043 25mm 3.871 1.180 4" 63.340 19.306
5milimeter 0.154 0.047 1" 3.970 1.210 4-1/4" 72.249 21.908
7/32" 0.190 0.058 26mm 4.170 1.271 4-1/2" 80.340 24.4487
6mm 0.223 0.068 27mm 4.490 1.368 4-3/4" 90.249 27.366
1/4" 0.249 0.076 1-1/8" 5.033 1.534 5" 99.940 30.461
7 0.298 0.091 30milimeter 5.548 1.691 5-1/2" 121.000 36.690
5/16" 0.387 0.118 1-1/4" 6.349 1.924 6" 143.900 43.860
8 0.398 0.120 32 6.314 1.894 6-1/2" 167.630 51.093
9mm 0.498 0.152 1-3/8" 7.550 2.303 7" 196.000 59.432
3/8" 0.557 0.170 35 7.553 2.390 7-1/2" 225.000 68.226
10mm 0.620 0.189 36mm 7.999 2.438 8" 254.55 77.586
11mm 0.748 0.228 38 8.903 2.792 10" 397.140 121.048
7/16" 0.761 0.232 1-1/2" 8.951 2.715
12mm 0.889 0.271 40mm 9.872 3.009
1/2" 0.994 0.303 1-5/8" 10.449 3.200
13mm 1.043 0.318 1-3/4" 12.179 3.712
14mm 1.207 0.368 45mm 12.555 3.807
9/16" 1.256 0.383 1-7/8" 13.977 4.260
15mm 1.391 0.424 48mm 14.205 4.330
5/8" 1.551 0.473 50mm 15.414 4.698
16mm 1.578 0.481 2" 15.906 4.848
17mm 1.791 0.543 2-1/8" 17.963 5.475
11/16" 1.880 0.573 2-1/4" 20.128 6.135
18mm 2.001 0.610 60mm 22.205 6.768
3/4" 2.237 0.682 2-3/8" 22.435 6.838
2-1/2" 24.856 7.576
2-5/8" 27.409 8.354
2-3/4" 30.083 9.169

Aluminum Round Rod Length

USA : 40 feet
Metric system: standard length is 9 - 12 metres

Stockist of 7075 Aluminium Tee Bar, Aluminium Rectangular Bar Suppliers In Mumbai, check Half Round Aluminum Bar, astm b211 alloy 6061-t6 equivalent standard, stock, sizes and weight per foot

6061 Aluminum Rod Condition

ANN Annealed
H&T Hardened and tempered.
PH Precipitation hardened.

Aluminium Round Bar Grades

  • Alloy: 19000, 19500, 19501, 19600, 19700, 6082 T6, 6061 T6, 2014 T6, 6063 T6, 7075 T6, 5052

Aluminium 6061 T6 Round Bar Applications

  • Power Generation
  • Off-Shore Oil Drilling Companies
  • Gas Processing
  • Petrochemicals
  • Pharmaceuticals
  • Specialty Chemicals
  • Chemical Equipment
  • Pharmaceutical Equipment
  • Heat Exchangers
  • Sea Water Equipment
  • Pulp and Paper Industry
  • Condensers

Hs Code Of Aluminium Round Bar

Aluminium Round Bar Hsn Code Description
76042910 Hard drawn bare aluminium conductors steel re-inforced (A.C.S.R.)
7604 Aluminium Bars, Rods And Profiles
76041020 Bars and rods, other than wire rods
76042990 Other
7407 Copper Bars, Rods And Profiles
76042930 Bars and rods, other than wire rods
74072990 Other

Aluminum Bronze Round Bar Surface Finish

HF Hot finished CG Centreless ground
HRAP Hot rolled annealed and pickled CF Cold finished
P Polished CD Cold drawn
SRE Slit rolled edge BD Bright drawn
RT Rough turned/peeled P&T Peeled and turned
PR Peeled and reeled ST Smooth turned
Why to pay extra when we provide Round Aluminium Rod, 4032 Aluminum Round Bar and Aluminum Bronze Round Bar in exact sizes as per international standard, Get 10mm, 12mm, 20mm, 25mm, 40mm Aluminium Rod and 7075 T6 Aluminum Hollow Bar free quote Now!

Standard Sizes Of Aluminium Round Bar

Type Aluminium Round Bar Sizes (Inches) Aluminum Round Bar Sizes (mm) ISO Tolerance
Cold Drawn and Ground 5/6" – 2.50" 10.00 – 75.00 h8-h9-h10-h11
Peeled and Polished 1.50" – 6.00" 40.00 – 150.00 h11, h11-DIN 1013
Peeled and Ground 3/4″ – 2.00" 20.00 – 50.00 h9-h10-h11
Cold Drawn and Polish 1/8" – 3.00" 3.00 – 75.00 h8-h9-h10-h11

Aluminium Bars Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).

45.0 5.0
50.0 6.0
55.0 7.0
60.0 8.0
65.0 9.0
70.0 10.0
75.0 12.0
80.0 16.0
90.0 20.0
100.0 25.0
130.0 30.0
160.0 35.0
200.0 40.0

  • SW 17 Aluminium Round Bar
  • SW 13 Aluminium Round Bar
  • SW 24 Aluminium Round Bar
  • SW 27 Aluminium Round Bar
  • SW 19 Aluminium Round Bar

7075 T6 Aluminum Hollow Bar Chemical Composition

Grade Mn Si Mg Fe Ti Cu Cr Zn Others(Total) Al
Aluminium 0.15 0.40 – 0.80 0.8-1.2 0.70 max 0.15 max 0.15-0.40 0.04-0.35 0.25 max 0.15 max Balance

Extruded Aluminium Round Bar Mechanical Composition

Temper Tensile Hardness
Ultimate Yield Elongation Brinell
KSI MPA MPA KSI %
T6, T651 45 310 145 21 25 65

ASTM B221 Aluminium 5052 Forged Bars Equivalent

Physical Property Value
Thermal Expansion 23.4 x 10^-6 /K
Density 2,70 g/cm³
Thermal Conductivity 170 W/m.K
Melting Point 582 °C
Modulus of Elasticity 69 GPa
Electrical Resistivity %43 IACS
If you need Aluminium 6061 T6 Round Bar, We can supply Aluminium Solid Bar in nearly any size, no matter how small the size or quantity. View 1/16” up to 20” dia Al Hot rolled bar material in Stock, check 7075 Aluminum Black Bar Suppliers latest price in india

Aluminum Round Bar Tolerances

Specified Thickness Alloy Tolerance
1" | 25.4mm 6061-T6 ± 0.012" | 0.30mm
1.5" | 38.1mm 6061-T6 ± 0.014" | 0.36mm
2" | 50.8mm 6061-T6 ± 0.024" | 0.61mm
2.5" | 63.5mm 6061-T6 ± 0.024" | 0.61mm
3" | 76.2mm 6061-T6 ± 0.024" | 0.61mm
4" | 101.6mm 6061-T6 ± 0.034" | 0.86mm
6" | 152.4mm 6061-T6 ± 0.044" | 1.18mm

6061 T6 Aluminum Round Bar Stock

Aluminium Round Bar Aluminium Round Rod
Aluminium Solid Bar 40mm Aluminium Round Bar
Half Round Aluminum Bar 5083 Round Bar
12mm Aluminium Rod 1 Inch Diameter Aluminum Rod
20mm Aluminium Round Bar Aluminium Solid Round Bar
Large Diameter Aluminum Round Bar 5083 Aluminum Round Bar
Aluminum Round Rod 12mm Aluminium Round Bar
7075 Aluminum Round Bar 7075 Aluminum Rod
4032 Aluminum Round Bar Aluminium 7075 Round Bar
6061 Aluminum Rod 3003 Aluminum Round Bar
30mm Aluminium Round Bar 6061 Aluminum Round Bar
25mm Aluminium Round Bar 10mm Aluminium Round Bar
7075 T6 Aluminum Rod 50mm Aluminium Round Bar
6063 Aluminum Round Bar Aluminium Round Alloy Bar
Half Round Aluminum Rod Extruded Aluminium Round Bar
3 Aluminum Round Bar Aluminium Half Round Flat Bar
7075 Aluminum Round Tube Aluminium Hollow Round Bar
Aluminium 6082 Round Bar Jindal Aluminium Round Bar
1100 Aluminum Round Bar Bright finish 5083 Aluminum Rod
Round Aluminium Rod 5086 Aluminum Flat Bar
Aluminium 6061 T6 Round Bar Aluminium 5052 Hex Bar
1 Inch Aluminum Round Bar Aluminum 7075 Bar
2011 Aluminum Round Bar Hollow Aluminium Round Bar
6082 Aluminum Round Bar 5083 Aluminum Rod
6063 Round Bar ASTM B221 Aluminium 5052 Forged Bars
Aluminum Round Bar Aluminium 5083 Rod
22mm Aluminium Round Bar Aluminium Welding Rod
7075t6 Aluminum Bar WERKSTOFF NR. 3.1254 Aluminium Round Bar
3mm Aluminium Round Bar Cold Drawn Aluminium 1100 Rods
5mm Aluminium Round Bar 5052 Aluminium Cold Drawn Round Bar
Aluminum Bronze Round Bar 5086 Aluminium Polished Bars
7075 T6 Aluminum Hollow Bar ASTM B221 Aluminium Flat Bar
60mm Aluminium Round Bar Aluminium Bronze Round Bar
Aluminium 6061 Round Bar 6mm Aluminium Round Bar
7075 Aluminium Round Bar 7050 Round Bar
Solid Aluminum Round Bar 2618 Aluminum Round Bar
100mm Aluminium Round Bar Aluminium Half Round Bar
16mm Aluminium Round Bar 8mm Aluminium Round Bar

Searching for

Aluminium Round Bar supplier in your country? Checklist of material we export in the following areas.

Application Projects
P.M. Metal Logo

Aluminium Solid Bar

Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).

Application Projects
P.M. Metal Logo

7075 Aluminum Round Bar

Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).

Application Projects
P.M. Metal Logo

5086 Aluminum Flat Bar

USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.

Application Projects
P.M. Metal Logo

Aluminium Welding Rod

Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.

Application Projects
P.M. Metal Logo

Cold Drawn Aluminium 1100 Rods

Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.

Application Projects
P.M. Metal Logo

ASTM B221 Aluminium Flat Bar

France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.