What is Copper Plate, Sheet, Strip and Coil?
Copper metal can be shaped in the form of plates, sheets, strips, and coils. Each of these components have distinct thickness and functions.
How are Copper Roofing Sheets made?
Copper roofing sheets are designed typically in 16 Oz or 20 Oz. For installing the roofing, the deck should be dry and smooth, free of any nails heads, or imperfections. Copper roofing sheets have different fastening requirements. They can either be secured with clets or fastened directly with battens.
Beryllium Copper Sheet vs Decorative Copper Sheets
Beryllium copper and decorative copper sheets have some similar characteristics, but cannot be used interchangeably.
What are Copper Tungsten Plate used for?
Copper tungsten plate is made with a combination of high heat resistance, high electrical, and low thermal conductivity. The plates are widely used in chip carriers, flanges, power semiconductor devices, substrates, missile components, and military equipment.
Specifications | ASTM B62 / ASME SB 62 |
---|---|
Form | Foils, Coils, Rolls, Shim Sheet, Flats, Plain Sheet, Strip Manufacturer and supplier |
Size | 1220 x 2440 mm, 1000 x 2000 mm, 1500 x 3000 mm, 2000 x 4000 mm, 2000 x 2000 mm |
Hardness | Hard, Soft, Half Hard, Spring Hard, Quarter Hard, etc. |
Thickness | From 0.1 to 100 mm |
Finish | Cold rolled sheet (CR), BA, Hot rolled plate (HR), 2B, No.4, No.3, HL, 8K |
Chemical Element | % Present |
---|---|
Copper (Cu) | Balance |
Others (Total) | 0.0 - 0.10 |
Mechanical Property | Value |
---|---|
Elongation A50 mm | 50-5 % |
Proof Stress | 50-340 MPa |
Hardness Vickers | 40 to 110 HV |
Tensile Strength | 200-360 MPa |
BS EN NUMBER | OLD BS EQUIVALENT | TITLE |
---|---|---|
Copper Rolled Flat Products | ||
1172 | 2870 | Sheet and strip for building purposes |
1652 | 2870, 2875 | Plate, sheet, strip and circles for general purposes |
1653 | 2870, 2875 | Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
1654 | 2870 | Strip for springs and connectors |
1758 | Strip for lead frames | |
13148 | - | Hot dip tinned strip |
14436 | - | Electrolytically tinned strip |
13599 | 4608 | Copper plate, sheet and strip for electrical purposes |
Physical Property | Value |
---|---|
Modulus of Elasticity | 117 GPa |
Density | 8.92 g/cm³ |
Thermal Conductivity | 391.2 W/m.K |
Melting Point | 1083 °C |
Electrical Resistivity | 0.0203 x10^-6 Ω .m |
Thermal Expansion | 16.9 x10^-6 /K |
THICKNESS | 2M X 1M | 4'X 2' | 2500MM X 12500MM |
---|---|---|---|
Size | Weight per sheet in Kg | ||
0.35 | 2.37 | ||
0.4 | 7.14 | 2.68 | |
0.45 | 8.04 | 2.99 | |
0.5 | 8.93 | 3.3 | |
0.55 | 9.8 | 3.61 | |
0.6 | 10.72 | 3.92 | |
0.7 | 12.5 | 4.64 | |
0.8 | 14.29 | 5.3 | |
0.9 | 16.07 | 6.0 | |
1.0 | 17.86 | 6.6 | |
1.2 | 21.43 | 7.9 | 34 |
1.4 | 9.3 | ||
1.6 | 28.56 | 10.6 | 45 |
2.0 | 35.72 | 13.3 | 56 |
2.5 | 44.65 | 16.5 | 70 |
3.0 | 53.58 | 19.9 | 84 |
3.25 | 58.05 | 21.6 | 91 |
4.0 | 71.44 | 26.5 | 112 |
4.76 | 85.0 | 32.3 | 133 |
5.0 | 89.3 | 33.1 | 140 |
6.0 | 107.16 | 39.8 | 168 |
6.35 | 113.4 | 42.2 | 177 |
8.0 | 54 | 224 | |
9.525 | 64 | 266 | |
10.0 | 279 | ||
12.0 | 215 | 335 | |
12.7 | 227 | ||
15.8 | 283 | ||
16.0 | 268 | ||
19.0 | 340 | ||
20.0 | 358 | ||
22.0 | 393 | ||
25.0 | 447 | ||
30.0 | 536 | ||
40.0 | 715 | ||
45.0 | 804 | ||
50.0 | 893 | ||
75.0 | 1340 | ||
100.0 | 1787 | ||
150.0 | 2680 |
Copper Plate Hs Code | Description |
---|---|
7409 | Copper plates, sheets and strip,of a thickness exceeding 0.15 mm Of refined copper: |
Gauge |
Lbs. Per Sheet |
Dimensions |
---|---|---|
.032 | 35.72 | 36 X 96 |
.040 | 44.65 | 36 X 96 |
.050 | 55.8 | 36 X 96 |
.063 | 72.56 | 36 x 96 |
Gauge | Lbs. Per Sheet | Dimensions |
---|---|---|
.080 | 89.30 | 36 X 96 |
.093 | 104.93 | 36 X 96 |
.125 | 139.54 | 36 x 96 |
.156 | 174.14 | 36 X 96 |
.1875 | 208.75 | 36 X 96 |
Thickness Oz. | Dimensions | Size In. | Lbs. Per Sheet |
---|---|---|---|
16 | 36 X 120 | (.021)* | 30.0 |
12 | 36 X 96 | (.016) | 18.0 |
20 | 36 X 96 | (.027) | 30.0 |
16 | 36 X 96 | (.021)* | 24.0 |
Thickness Oz. | Dimensions | Size In. | Lbs. Per Sheet |
---|---|---|---|
24 | 36 X 120 | (.032) | 45.0 |
20 | 36 X 120 | (.027) | 38.0 |
32 | 36 X 96 | (.043) | 48.0 |
24 | 36 X 96 | (.032)* | 36.0 |
32 | 36 X 120 | (.043)* | 60.0 |
Size (mm) |
Finish | Temper | kg | Alloy | ||
---|---|---|---|---|---|---|
C11000 | C10200 | C12200 | ||||
0.55 x 900 x 1800 | MILL | 65 MAX SOFT | 7.97 | 50001923 | – | – |
MILL | 1/2 HARD | – | – | 50001936 | ||
PVC | 1/2 HARD | – | – | 50001901 | ||
0.55 x 1200 x 2400 | MILL | 1/2 HARD | 14.16 | – | – | 50001987 |
PVC | 1/2 HARD | – | – | 50001962 | ||
0.7 x 900 x 1800 | MILL | 65 MAX SOFT | 10.14 | 50001956 | – | 50001930 |
MILL | 1/2 HARD | – | – | 50001938 | ||
0.7 x 1200 x 2400 | MILL | 1/2 HARD | 18.02 | – | – | 50001992 |
0.9 x 900 x 1800 | MILL | 65 MAX SOFT | 13.03 | 50001957 | – | – |
MILL | 1/2 HARD | – | – | 50001939 | ||
0.9 x 1200 x 2400 | MILL | 1/2 HARD | 23.17 | – | – | 50002003 |
PVC | 1/2 HARD | – | – | 50011450 | ||
1 x 900 x 1800 | MILL | 1/2 HARD | 14.48 | 50001940 | – | – |
1 x 1200 x 2400 | MILL | 1/2 HARD | 25.75 | – | – | 50001993 |
1.2 x 900 x 1800 | MILL | 65 MAX SOFT | 17.38 | 50001917 | – | – |
MILL | 1/2 HARD | 50001941 | – | 50001905 | ||
1.2 x 1200 x 2400 | MILL | 1/2 HARD | 30.90 | – | – | 50001996 |
1.6 x 900 x 1800 | MILL | 65 MAX SOFT | 23.17 | 50001932 | – | – |
MILL | 1/2 HARD | 50001942 | – | 50001916 | ||
1.6 x 1200 x 2400 | MILL | 1/2 HARD | 41.20 | – | – | 50001997 |
2 x 900 x 1800 | MILL | 65 MAX SOFT | 28.97 | – | 50001949 | – |
MILL | 1/2 HARD | – | 50001943 | 50001925 | ||
2 x 1200 x 2400 | MILL | 1/2 HARD | 51.49 | – | – | 50001998 |
2.5 x 900 x 1800 | MILL | 1/2 HARD | – | – | 50001918 | |
3 x 900 x 1800 | MILL | 50 MAX SOFT | 43.45 | – | 50001922 | – |
MILL | 1/2 HARD | 50001946 | – | 50001907 | ||
3 x 1200 x 2400 | MILL | 1/2 HARD | 77.24 | 50001967 | – | 50002000 |
Size(mm) | Finish | Temper | kg/plate (nominal) | Alloy |
---|---|---|---|---|
C10200 | ||||
4 x 900 x 1800 | MILL | 65 MAX SOFT | 57.93 | 50001908 |
5 x 900 x 1800 | MILL | 1/2 HARD | 72.41 | 50002060 |
6 x 900 x 2400 | MILL | 1/2 HARD | 115.86 | 50002027 |
10 x 900 x 1800 | MILL | 1/2 HARD | 144.83 | 50002035 |
12.5 x 900 x 1800 | MILL | 1/2 HARD | 111.75 | 50002039 |
20 x 900 x 1800 | MILL | 1/2 HARD | 289.66 | 50010978 |
25 x 900 x 1800 | MILL | 1/2 HARD | 362.07 | 50002065 |
Size (mm) |
Finish | Temper | Alloy | |
---|---|---|---|---|
C12200 | C11000 | |||
0.1 x 600 | MILL | SOFT | – | 50002315 |
0.16 x 600 | MILL | SOFT | – | 50002346 |
0.25 x 6000 | MILL | SOFT | – | 50002344 |
0.55 x 300 | MILL | 1/2 HARD | – | 50106109 |
0.55 x 900 | MILL | 1/2 HARD | 50002515 | – |
0.55 x 1200 | MILL 1000 kg | 1/2 HARD | 50002541 | – |
MILL 500 kg | 1/2 HARD | 50002543 | – | |
0.6 x 300 | MILL | 1/2 HARD | – | 50106110 |
0.7 x 900 | MILL | 1/2 HARD | 50002516 | – |
0.7 x 1200 | MILL | 1/2 HARD | 50002532 | – |
0.9 x 900 | MILL | 1/2 HARD | 50002517 | – |
0.9 x 1200 | MILL | 1/2 HARD | 50002534 | – |
1.2 x 300 | MILL | 1/2 HARD | – | 50106114 |
1.6 x 300 | MILL | 1/2 HARD | 50110585 | 50106115 |
STOCK | THICKNESS MM | FINISH | SHEET SIZE MM |
---|---|---|---|
Mirror | 0.7, 0.9, 1.2 (other thickness’ to order) | Bright Polished | up to 3000 x 1000 |
Natural | 0.4*, 0.5, 0.7, 0.9, 1.2, 1.5, 2.0, 3.0 | Mill, Semi Bright | 2000 x 1000 (*1200 x 600) |
Dull Polish | 0.9, 2000 x 1000 (other sizes to order) | Brushed | up to 3000 x 1000 |
Natural | 1.2 | Mill, Semi Bright | 3000 x 1000 (new size) |
Verdigris | 0.7 | Green Pre-weathered | 2000 x 1000 |
Natural | 1.2, 2.0 | Mill, Semi Bright | 8ft x 4ft (2438 x 1219) |
Hammered | 0.7 | Polished | 2000 x 1000 |
COPPER ALLOY | CEN | BS | UNS |
---|---|---|---|
Cu-OF | CW008A | C103 | C10200 |
Cu-DHP | CW024A | C106 | C12200 |
Cu-ETP | CW004A | C101 | C11000 |
ASTM B152 C10100 Sheet Imperial
Surface finish | Width (in) | Gauge (in) |
---|---|---|
BA Mexinox only | max. 48 | 18–28 |
2B – Cold rolled, heat treated, pickled, skin passed | max. 72* | 10–24 |
Polished (not brushed) | max. 60 | 11–24 |
2D – Cold rolled, heat treated, pickled | max. 60 | 12–24 |
Temper rolled Mexinox only | max. 48 | 13–29 |
ASTM B 62 Copper Shim Sheets Metric
Surface finish | Width (mm) | Thickness (mm) |
---|---|---|
2R – Cold rolled, bright annealed | max. 1524 | 0.25–3.5 |
2B – Cold rolled, heat treated, pickled, skin passed | max. 2032 | 0.25–8.0 |
2H – Work hardened | max. 1524 | 0.4–6.35 |
2D – Cold rolled, heat treated, pickled | max. 1524 | 0.4–6.35 |
Polished, brushed | max. 1524 | 0.5–4.0 |
2E – Cold rolled, heat treated, mechanically descaled | max. 2032 | 0.4–8.0 |
Price of Pure Copper Plate | ASTM B152 C10100 Plate Price in India (INR) | ASME SB 62 Plate Price in USD | Copper Cold Rolled Plates Price in UAE Dirham |
---|---|---|---|
331031271520 WE SECF SMD EMI CONTACT FINGER SIZE 0320 2.7 X 1.5 X 2 MM MATERIAL COPPER BERYLLIUM CUBE GOLD PLATED | INR 7/ PCS | $0.095 | 0.095 UAE Dirham |
COPPER PLATE FOR MOULD-230MM NARROW 4PCS-(PEEPCG NO:0230011397 SL.NO:8 SPARE FOR STEEL MELT SHOP)-PARTS OF CASTING MACH. | INR / KG | $35.47 | 35.47 UAE Dirham |
TUNGSTEN-COPPER PLATES COMPOSITION 75:25 20X100X200 | INR 19,828/ PCS | $267.80 | 267.80 UAE Dirham |
COPPER PLATING BRIGHTENER FOR MFG.PCB. : CIRCUPOSIT(TM) MLBPROMOTER 213A-1 (100 LTR) C/O JAPAN | INR 1,538/ KG | $20.77 | 20.77 UAE Dirham |
Copper Plate | 40 Gauge Copper Sheet |
Copper Sheet | Perforated Copper Sheet |
Copper Sheet Metal | 14 Gauge Copper Sheet |
Hammered Copper Sheets | 36 Gauge Copper Sheet |
Copper Roofing Sheets | Copper Flashing Sheet |
Thin Copper Sheets | Pure Copper Plate |
Copper Foil Sheet | Copper Metal Roof Panels |
18 Gauge Copper Sheet | 30 Gauge Copper Sheet |
20 Gauge Copper Sheet | Copper Aluminum Sheet |
Copper Sheet Metal 4x8 | 26 Gauge Copper Sheet |
24 Gauge Copper Sheet | B&q Copper Plate |
4x8 Copper Sheet Metal 20 Gauge | Copper Plate Heat Exchanger |
4x8 Sheet Copper | Copper Electroplating |
16 Gauge Copper Sheet | Copper Tungsten Plate |
18 Gauge Copper Sheet 4x8 | Pure Copper Sheet |
1mm Copper Sheet | Zinc Coated Copper |
Copper Laminate Sheets | Silver Coated Copper |
Copper Sheet Roll | Copper Strip |
22 Gauge Copper Sheet | Copper Coil |
Beryllium Copper Sheet | C101 Copper Sheet |
Copper Foil Roll | Astm B152 C10100 Copper Sheet |
Copper Mesh Sheet | Alloy 101 OfeOfhc Copper Sheet |
Copper Backsplash Sheet | Alloy 110 Copper Sheet and Plate |
2mm Copper Sheet | ASTM B152 C10100 Plate |
Lowes Copper Sheet | Copper Cold Rolled Plates |
3mm Copper Sheet | ASTM B 62 Copper Shim Sheets |
Distressed Copper Sheets | ASME SB 62 Plate |
Decorative Copper Sheets | Copper Hot Rolled Plates |
Copper Kick Plate | Copper Polished Cold Drawn Plates |
Searching for
Copper Plate Supplier in your country? Checklist of material we export in the following areas.
Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).
Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).
USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.
Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.
Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.
France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.