ASTM B463 UNS N08020 Sheet and Carpenter 20 Strip Supplier in India

Alloy 20 Plate

Alloy 20 Plate vs Alloy 20 Sheet
Plates and sheets are versatile components that are generally distinguished based on their gauge thickness.

  • Alloy 20 plate is designed in thickness above 6mm and can extend up to 150mm. The versatile plates provide support and stability to different applications.
  • Alloy 20 sheets are designed in thickness below 6mm and above 0.5mm. The sheets add aesthetical value to the modules. They focus on weight-saving and shouldn’t be preferred in applications that require stability and strength.

What are Carpenter 20 Cb-3 Plates?
Carpenter 20 Cb-3 plates are austenitic nickel, chromium, and iron plates that show excellent corrosion resistance properties. These plates work well sulfuric and aggressive media and are stabilized using niobium.

What is Alloy 20 Stainless Steel Strips vs Alloy 20 Steel Coil
Strips and coils of the alloy 20 grades are integral in welding a range of equipment. The components can be distinguished from certain features.

  • Alloy 20 stainless steel strips are wound soon after the rolling process. This allows them to be transported to different locations efficiently before shearing them in small pieces. They are available in widths of not less than 600mm.
  • Alloy 20 stainless steel strips are components that can be sheared from a coil and shaped in different sizes. They are used to weld the modules using the strips in different configurations. A strip is designed with widths of less than 600mm.

Difference between ASTM B463 UNS N08020 Sheet vs ASME SB 463 UNS N08020 Plate
ASTM and ASME are two manufacturing types of the UNS N08020 grade plates. Both these plate types can be distinguished from certain features.

  • ASTM B463 UNS N08020 sheet is manufactured by an organization that covers standards and dimensions for technological service across different industries. The ASME SA 515 Gr 60 sheet ASME SB 463 UNS N08020 Plate is a grade of the piping industry that covers a range of designs and specifications for a range of equipment utilized in the pressure vessel grades.
  • ASME standard plates cover around 600 codes and standards for different technical materials. ASTM grade sheets cover above 12,000 or more standards for different services and products.

Exporter & Supplier of Alloy 20 Clad Plate, check Alloy 20cb3 Hot rolled Plate, SB 463 UNS N08020 Sheet available in BA PE, 2B PE, No. 4 PE Finish

Alloy 20 Sheet Specification

Specification ASTM / ASME B463/ SB463
Length 3m, 2.44m, 2m, or as required
standards and approvals
  • EN ISO 18286
  • EN 10051
  • EN 10088-1
  • ISO 15510
  • EN ISO 9445
  • ASTM A 480
  • ASTM A 959
  • ASME IID
Finish 2D, 2B, BA NO(8), mirror, Hot rolled plate, Cold rolled sheet, SATIN , 1D, No.1 finish hot rolled, 2B, BA, No.4, 8K, hairline, satin, brush etc.
Standard Sizes 1220 x 2440 mm, 1000 x 2000 mm, 2000 x 2000 mm, 1500 x 3000 mm, 2000 x 4000 mm
Stock available in form of Clad Plate, Flat Sheet, Rolling Sheet, Shim Sheet, annealed, Rolling Plate, Flat Shim, Flats, Checker Plate, Blank (Circle), tread plate, Plain Sheet, Plate, Foils, descaled, Sheet, Rolls, soft annealed, Coils, Strip, sheared
Thickness From 0.1 to 100 mm
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Width Between 10 to 2500 mm
Manufacturers Jindal, Shah Alloys, ZPSS, Sail, TISCO, Outokumpu, BAOSTEEL, JISCO, LISCO, POSCO
Hardness Hard, Quarter Hard, Soft, Half Hard, Spring Hard
Value added services Waterjet cutting, Laser cutting, edge preparation, Plasma cutting, sawing and shearing, welding, Bending and mechanical processing

Alloy 20 Plate Material Chemical Composition

Grade Cu C Ni Mn Cr Si Mo S Fe P
Alloy 20 3.0-4.0 0.07 max 32.0-38.0 2.00 max 19.0-21.0 1.00 max 2.0-3.0 0.035 max 29.85 min* 0.045 max

Carpenter 20 Cb-3 Plates Mechanical Properties

Density Yield Properties (0.2%Offset) Melting Point Elongation Tensile Properties
8.1 g/cm3 Psi – 35,000, MPa – 241 1443 °C (2430 °F) 30% Psi -80,000, MPa -551

Alloy 20 Plate Equivalent

STANDARD AFNOR WERKSTOFF NR. EN UNS
Alloy 20 Z2NCUD31-20AZ 2.4660 NiCr20CuMo N08020

ASTM B463 UNS N08020 Sheet Gauge Tolerances

Gauge LB/Sq. Ft. LB/Sq In. Gauge Tolerance
72″ Wide 96″ Wide
3/16 0.01875 8.0579 0.005958 +.0045″ -.0010″ +.0050″ -.0010″
7/32 0.02187 9.0870 0.006854
1/4 0.02500 11.0162 0.007750
5/16 0.03125 13.0746 0.009546
3/8 0.03750 16.0496 0.011456 +.0055″ -.0010″ +.0060″ -.0010″
7/16 0.04375 19.0080 0.013250
1/2 0.05000 21.0633 0.015044
9/16 0.05625 24.0247 0.016838
5/8 0.06250 26.0831 0.018633
11/16 0.06875 29.0415 0.020427
1 1.00000 42.0665 0.029628 +.0070″ -.0010″ +.0075 -.0010″
1-1/8 1.01250 47.0833 0.033217
1-1/4 1.02500 53.0001 0.036806
1-3/8 1.03750 58.0169 0.040395
1-1/2 1.05000 63.0337 0.043984
1-3/4 1.07500 73.0672 0.051161
4 4.00000 168.0264 1.016850 +.0200″ -.0010
3 3.00000 126.0301 0.087709 +.0160″ -.0010″
3-1/2 3.05000 146.0972 1.002064
3/4 0.07500 32.0123 0.022308 +.0060″ -.0010″ +.0065″ -.0010″
13/16 0.08125 34.0707 0.024102
7/8 0.08750 37.0291 0.025897
15/16 0.09375 39.0875 0.027691
2 2.00000 84.0008 0.058339 +.0125″ -.0010″ +.0150″ -.0010″
2-1/8 2.01250 89.0610 0.062229
2-1/4 2.02500 94.0777 0.065817
2-1/2 2.05000 105.0113 0.072995
2-3/4 2.07500 115.0449 0.080173

2.4660 Alloy 20 Sheet Flatness Tolerances

Thickness (t), (mm) Thicknesses (mm)
3/8 (9.052) <= t < 1/2 (12.070) 5/16 (7.09)
1/4 <= t < 3/8 (9.052) 3/8 (9.05)
1 (25.040) <= t < 1-1/2 (38.010) 1/4 (6.04)
t < 1/4 (6.035) 7/16 (11)
3/4 (19.005) <= t < 1 (25.040) 5/16 (7.09)
t >=4 (101.060) 1/4 (6.04)
1 1/2 (38.010) < = t < 4 (101.060) 1/4 (6.04)
1/2 (12.070) <= t < 3/4 (19.005) 5/16 (7.09)

Specified Thickness in. Permitted Variations, in. Over and Under, Except as Indicated Otherwise for Specified Width (w) in.
Width <=60 Width >60
>0.0250 to 0.03125 -0.0010; +0.0022 -0.0010; +0.0022
>0.01875 to 0.0250 -0.0010; +0.0020 -0.0010; +0.0020
>0.03125 -0.0010; +0.0030 -0.0010; +0.0030

Buy cut to size American, Korean and European standards Alloy 20 Rolling Sheets in Mumabi, Get 2m x 1m standard size ASTM B463 UNS N08020 Shim Stock, Incoloy Alloy 20 Rolling Sheets and Carpenter 20 Perforated Plate

Alloy 20 Stainless Steel Strips Density

Density
lb/in3 : 0.292 , g/cm3 : 8.08

Alloy 20 Steel PLate Applications

Alloy 20 Steel PLate Applications
  • Power Generation
  • Off-Shore Oil Drilling Companies
  • Gas Processing
  • Petrochemicals
  • Pharmaceuticals
  • Specialty Chemicals
  • Chemical Equipment
  • Pharmaceutical Equipment
  • Heat Exchangers
  • Sea Water Equipment
  • Pulp and Paper Industry
  • Condensers

Types of Alloy 20 Plate

Alloy 20 Sheet
Alloy 20 Sheet
Alloy 20 Sheet
Carpenter 20 Cb-3 Plates
Carpenter 20 Cb-3 Plates
Carpenter 20 Cb-3 Plates
ASTM B463 UNS N08020 Sheet
ASTM B463 UNS N08020 Sheet
ASTM B463 UNS N08020 Sheet
2.4660 Alloy 20 Sheet
2.4660 Alloy 20 Sheet
2.4660 Alloy 20 Sheet
Alloy 20 Stainless Steel Strips
Alloy 20 Stainless Steel Strips
Alloy 20 Stainless Steel Strips
Alloy 20 Steel Coil
Alloy 20 Steel Coil
Alloy 20 Steel Coil
Alloy 20 Clad Plate
Alloy 20 Clad Plate
Alloy 20 Clad Plate
ASTM B463 UNS N08020 Shim Stock
ASTM B463 UNS N08020 Shim Stock
ASTM B463 UNS N08020 Shim Stock
Incoloy Alloy 20 Rolling Sheets
Incoloy Alloy 20 Rolling Sheets
Incoloy Alloy 20 Rolling Sheets
Carpenter 20 Perforated Plate
Carpenter 20 Perforated Plate
Carpenter 20 Perforated Plate
ASME SB 463 Alloy 20 Cold rolled Plate
ASME SB 463 Alloy 20 Cold rolled Plate
ASME SB 463 Alloy 20 Cold rolled Plate
Carpenter 20cb3 Polished Plate
Carpenter 20cb3 Polished Plate
Carpenter 20cb3 Polished Plate

Alloy 20 Plate Melting Range

Melting Point
1443 °C (2430 °F)
Get details of ASME SB463 Alloy 20 Sheet and Alloy 20 Sheet Suppliers in Mumbai, Check Carpenter 20cb3 Polished Plate and Alloy 20 Plate Astm standard dimensions, sizes, thickness chart, weight and tolerances in mm

UNS N08020 Perforated Sheet Sizes

Hole Centres (imm) Finish Tck mm Full Sheet Size (mm) Hole Dia (mm) O/A
1.05 2B 0.06 2000 x 1000 0.075 23%
2 2B 1.00 2000 x 1000 1 23%
2.06 2B 1.00 2000 x 1000 1.05 30%
3.05 2B 1.00 2000 x 1000 2 30%
3.05 2B 1.00 2000 x 1000 2 30%
5 2B 1.00 2000 x 1000 3 33%
5.06 2B 1.00 2000 x 1000 4 46%
8 2B 1.00 2000 x 1000 5 35%
8 2B 1.00 2000 x 1000 6 51%
10 2B 1,0 2000 x 1000 8 58%

Incoloy Alloy 20 Polished Sheet Sizes

PRODUCT THICKNESS MM MAX SHEET SIZE MM FINISH
Grade 0.08, 1.02 2400 x 1200, 2500 x 1250 Rimex Super Mirror
0.09 2000 x 1000 Bright
0.09 2000 x 1000 Plain 2B
0.09, 1.02 2000 x 1000, 2500 x 1250 Brushed Finish
0.08, 1.00 2500 x 1250 Embossed

Size (in mm) Size (in inches)
3.18mm .125"
3.40mm .134"
3.96mm .156"
4.75mm .187"
6.35mm .250"
7.92mm .312"
9.53mm .375"
12.7mm .500"
15.9mm .600"
19.1mm .750"
22.2mm .875"
25.4mm 1"
28.6mm 1.125"
31.8mm 1.250"
38.1mm 1.500"
44.5mm 1.750"
50.8mm 2"
63.5mm 2.500"
76.2mm 3"

Carpenter 20cb3 Plate Thickness

Thickness (in mm)
0.02, Temper: Half hard 0.0005, Temper: As rolled
0.02, Temper: Annealed 0.0004, Temper: As rolled
0.025, Temper: Half hard 0.00076, Temper: As rolled
0.025, Temper: Annealed 0.00065, Temper: As rolled
0.030, Coil width: 15.05, Temper: Half hard 0.001, Temper: As rolled
0.05, Temper: Half hard 0.002, Temper: Half hard
0.038, Temper: Annealed 0.002, Temper: As rolled
1.00, Temper: Annealed 0.0025, Temper: As rolled
0.075, Temper: Half hard 0.0025, Temper: As rolled, Condition: Surface oxide
0.015, Coil width: 0.03, Temper: Half hard 0.0125, Temper: Half hard
2.00, Temper: Half hard 0.005, Temper: Quarter hard
2.00, Temper: 1/4 Hard 0.005, Temper: Half hard
3.00, Temper: 1/4 Hard 0.01, Temper: Half hard
3.00, Temper: Annealed 0.0075, Temper: Half hard
6.035, Temper: Hard 0.01, Coil width: 10, Temper: Half hard
  0.015, Temper: Half hard

DIN 2.4660 Sheet Thickness

1.02 1.00
0.08 0.06
2.00 1.08
1.06 1.05
6.00 5.00
4.00 3.00
15.00 12.00
10.00 8.00
25.04 20.00

ASME SB 463 Alloy 20 Cold rolled Plate Gauge Chart

Gauge Number Inches MM
16 .00625 1.0587
18 .0050 1.0270
8 .017187 4.0365
20 .00375 .09525
9 .015625 3.0968
22 .003125 .07937
10 .014062 3.0571
26 .001875 .0476
11 .0125 3.0175
28 .001562 .0396
12 .010937 2.0778
24 .0025 .0635
14 .007812 1.0984
30 .00125 .03175

ASTM B463 UNS N08020 Alloy 20 Plate Manufacturing Process

ASTM B463 UNS N08020 Alloy 20 Plate Manufacturing Process

WNR 2.4660 Strip Dimension

Alloy 20 Gauge, Width and Length Weight
Lbs. per Sq Ft.
Est. Wt. per Sheet
10GA (.0135”)
36 x 120 5.0670 170.01
48 x 96 5.0670 181.04
48 x 120 5.0670 226.08
60 x 120*
5.0670 283.05
60 x 144*
5.0670 340.02
72 x 120* 5.0670 340.02
7GA (.01874")
48 x 96 7.0871 251.09
48 x 120 7.0871 314.08
48 x 144 7.0871 377.08
11 GA (.0120")
36 x 96 5.0040 121.00
36 x 120 5.0040 151.02
36 x 144 5.0040 181.04
48 x 96 5.0040 161.03
48 x 120 5.0040 201.06
48 x 144 5.0040 241.09
60 x 120 5.0040 252.00
60 x 144 5.0040 302.04
72 x 120* 5.0040 302.04
72 x 144* 5.0040 362.09
13 Ga (.0090")
36 x 96 3.0780 90.072
36 x 120 3.0780 113.04
48 x 120 3.0780 151.02
12 Ga.0 (.0105")
36 x 96 4.0410 105.08
36 x 120 4.0410 132.03
36 x 144 4.0410 158.08
42 x 120 4.0410 154.04
48 x 96 4.0410 141.01
48 x 120 4.0410 176.04
48 x 144 4.0410 211.07
60 x 96 4.0410 176.04
60 x 120 4.0410 220.05
60 x 144 4.0410 264.06
72 x 120* 4.0410 264.06
72 x 144 4.0410 317.05
14 Ga.0 (.0075")
30 x 120 3.0150 78.075
36 x 96 3.0150 75.060
36 x 120 3.0150 94.050
36 x 144 3.0150 113.04
42 x 120 3.0150 110.03
42 x 144 3.0150 132.03
48 x 96 3.0150 100.08
48 x 120 3.0150 126.00
48 x 144 3.0150 151.02
60 x 120 3.0150 157.05
60 x 144 3.0150 189.00
72 x 120 3.0150 189.00
72 x 144 3.0150 226.08
18 Ga.0 (.0048")
30 x 96 2.0016 40.032
30 x 120 2.0016 50.040
36 x 96 2.0016 48.038
36 x 120 2.0016 60.048
36 x 144 2.0016 72.058
42 x 120 2.0016 70.056
48 x 96 2.0016 64.051
48 x 120 2.0016 80.064
48 x 144 2.0016 96.077
60 x 120 2.0016 100.08
60 x 144 2.0016 121.00
16 Ga.0 (.0060")
30 x 96 2.0520 50.040
30 x 120 2.0520 63.000
36 x 96 2.0520 60.048
36 x 120 2.0520 75.060
36 x 144 2.0520 90.072
42 x 120 2.0520 88.020
48 x 96 2.0520 80.064
48 x 120 2.0520 100.08
48 x 144 2.0520 121.00
60 x 96 2.0520 100.08
60 x 120 2.0520 126.00
60 x 144 2.0520 151.02
19 Ga.0 (.0042")
36 x 120 1.0764 52.092
22 Ga.0 (.0030")
30 x 96 1.0260 25.020
30 x 120 1.0260 61.050
36 x 96 1.0260 30.024
36 x 120 1.0260 37.080
36 x 144 1.0260 45.036
48 x 96 1.0260 40.032
48 x 120 1.0260 50.040
20 Ga.0 (.0036")
30 x 96 1.0512 30.024
30 x 120 1.0512 37.080
36 x 96 1.0512 36.029
36 x 120 1.0512 45.036
36 x 144 1.0512 54.043
42 x 120 1.0512 52.092
48 x 96 1.0512 48.038
48 x 120 1.0512 60.048
48 x 144 1.0512 72.058
24 Ga.0 (.0024")
30 x 96 1.0008 20.016
30 x 120 1.0008 25.020
36 x 96 1.0008 24.019
36 x 120 1.0008 30.024
48 x 96 1.0008 32.026
48 x 120 1.0008 40.032
28 Ga.0 (.0015")
36 x 96 .0630 15.012
36 x 120 .0630 18.090
26 Ga.0 (.0018")
30 x 96 .07560 15.012
30 x 120 .07560 18.090
36 x 96 .07560 18.014
36 x 120 .07560 22.068
48 x 96 .07560 24.01
48 x 120 .07560 30.024

ASME SB463 Alloy 20 Sheet Finishes

  • #4 Architectural Finish
  • #7 Finish
  • #6 Finish
  • #4 Dairy or Sanitary Finish
  • #3 Finish
  • #8 Mirror Finish
  • True #8 Mirror Finish

Alloy 2.4660 Plate Weight chart

Sheet - Imperial

Size
ft
Weight
lbs/sheet
Thickness
in
10 x 3 14.07 0.0012
10 x 3 17.02 0.0014
10 x 3 19.06 0.0016
10 x 3 22.01 0.0018
10 x 3 24.05 0.0020
10 x 3 27.00 0.0022
10 x 3 29.04 0.0024
10 x 3 34.04 0.0028
10 x 3 39.03 0.0032
10 x 3 44.02 0.0036
10 x 3 49.01 0.0040
10 x 3 57.07 0.0047
10 x 3 58.09 0.0048
10 x 3 61.03 0.0050
10 x 3 68.07 0.0056
10 x 3 77.03 0.0063
10 x 3 85.09 0.0070
10 x 3 95.07 0.0078
10 x 3 98.02 0.0080
10 x 3 110.04 0.0090
10 x 3 120.02 0.0100
10 x 3 120.02 0.0098
10 x 3 122.07 0.0104
10 x 3 144.08 0.0118
10 x 3 157.00 0.0128
10 x 3 192.06 0.0157
10 x 3 196.03 0.0160
10 x 3 215.09 0.0176
10 x 3 229.04 0.0187
10 x 3 241.07 0.0197
10 x 3 289.05 0.0236

Sheet - Metric

Thickness
mm
Size
m
Weight
kg/sheet
0.0300 2 x 1 4.07
0.0376 2 x 1 5.09
0.0400 2 x 1 6.03
0.0457 2 x 1 7.02
0.0500 2 x 1 7.09
0.0559 2 x 1 8.08
0.0600 2 x 1 9.04
0.0710 2 x 1 11.01
0.0800 2 x 1 12.06
0.0914 2 x 1 14.03
1.0000 2 x 1 15.07
1.0200 2 x 1 18.08
1.0220 2 x 1 19.02
1.0270 2 x 1 19.09
1.0420 2 x 1 22.03
1.0600 2 x 1 25.01
1.0780 2 x 1 28.00
2.0000 2 x 1 31.04
2.0030 2 x 1 31.09
2.0286 2 x 1 35.09
2.0500 2 x 1 39.03
2.0540 2 x 1 39.09
2.0640 2 x 1 41.04
3.0000 2 x 1 47.01
3.0250 2 x 1 51.00
4.0000 2 x 1 62.08
4.0060 2 x 1 63.07
4.0460 2 x 1 70.00
4.0760 2 x 1 74.07
5.0000 2 x 1 78.05
6.0000 2 x 1 94.02
Looking for Carpenter 20 Cb-3 Plates suppliers? Hot rolled/ Cold rolled DIN 2.4660 Thin Strips, ASTM B463 UNS N08020 Alloy 20 Plate distributor in India, Get Price of Alloy 20 Plate Material, UNS N08020 Alloy 20 Coil per kg in Mumbai

ASTM B463 Alloy 20 Coil Price list

ALLOY STEEL 20 PLATE GRADE : 1.2311 SIZE: 16X2200X2500MM, 20X2200X2500MM,32X2200X2500MM,40X2200X2500MM,45X2200X2500MM

$47 / KG

ALLOY STEEL 20 PLATE GRADE : 1.2311 SIZE: 16X2200X2500MM, 20X2200X2500MM, 32X2200X2500MM, 40X2200X2500MM, 45X2200X2500MM

20MM X 2000MM X 6000MM HOT ROLLED ALLOY STEEL PLATE

$58 / KG

20MM X 2000MM X 6000MM HOT ROLLED ALLOY STEEL PLATE

ALUMINIUM ALLOY 20 PLATE, 7010/7050 ABM3-1029 T7651, 165 GF X 100 X 20MM

$498 / KG

ALUMINIUM ALLOY 20 PLATE, 7010/7050 ABM3-1029 T7651, 165 GF X 100 X 20MM

Alloy UNS N08020 Plate Inventory

Alloy 20cb3 Hot rolled Plate Alloy 20 Sheet
Carpenter 20 Perforated Plate Alloy 20 Plate Material
ASME SB 463 Alloy 20 Cold rolled Plate Alloy 20 Plate Astm
Carpenter 20cb3 Polished Plate Alloy 20 Plate
UNS N08020 Alloy 20 Coil Carpenter 20 Cb-3 Plates
UNS 8020 Slitting Coil ASTM B463 UNS N08020 Sheet
DIN 2.4660 Thin Strips SB 463 UNS N08020 Plate
Alloy 20 Coil 2.4660 Alloy 20 Sheet
Alloy 20 Plate Alloy 20 Stainless Steel Strips
ASTM B463 UNS N08020 Alloy 20 Plate Alloy 20 Steel Coil
WNR 2.4660 Strip UNS N08020 Sheet Coil
uns n08020 plate Alloy 20 Clad Plate
carpenter 20 steel sheets Alloy 20 Plate
ASME SB463 Alloy 20 Sheet ASTM B463 UNS N08020 Shim Stock
Alloy 2.4660 Plate Incoloy Alloy 20 Rolling Sheets
ASTM B463 Alloy 20 Coil Werkstoff 2.4660 Rolling Plate

Alloy 20 Plate Test Certificates

  • Raw Materials Certificatet
  • Third Party Inspection Report
  • 100% Radiography Test Report, etct
  • EN 10204/3.1B,t

Searching for

Alloy 20 Plate Supplier in your country? Checklist of material we export in the following areas.

Application Projects
P.M. Metal Logo

Alloy 20 Plate Astm

Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).

Application Projects
P.M. Metal Logo

ASTM B463 UNS N08020 Sheet

Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).

Application Projects
P.M. Metal Logo

ASME SB 463 Alloy 20 Cold rolled Plate

USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.

Application Projects
P.M. Metal Logo

DIN 2.4660 Thin Strips

Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.

Application Projects
P.M. Metal Logo

ASME SB463 Alloy 20 Sheet

Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.

Application Projects
P.M. Metal Logo

Alloy 2.4660 Plate

France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.