ASTM B575 UNS N10276 Sheet and Alloy C276 Coil Supplier in India
What is Hastelloy C276 Plate, Sheet and Coil?
Hastelloy C276 is designed in definite shapes of plates, sheets, and coils. Each of these components has its set of features and functionality in the system.
- Hastelloy C276 plates are high-strength material that provides stability and strength to different items. These robust plates are designed in thickness above 6mm or more.
- Hastelloy C276 sheets are devices designed in thickness less than 6mm but higher than 0.5mm. These modules focus more on weight-saving and adding an aesthetical value rather than providing strength and stability.
- Hastelloy C276 coils are wound soon after the rolling process. Designed in thickness between 1.2mm up to 20mm, they can be easily transported from one place to the other.
Is Hastelloy C276 Clad Plate corrosion resistant?
Hastelloy C276 clad plate is a chromium, nickel, iron, and molybdenum grade that is solid-solution strengthened. These plates showcase excellent corrosion resistance properties and have exceptional stress resistance across different stress-induced setups. The superior chemical content in the clad plate gives them enhanced resistance against crevice corrosion and pitting in marine setups. Apart from this, the superalloy resists the development of precipitates due to the formation of grain boundary leading to enhanced corrosion resistance properties.
Is Alloy C276 Plate magnetic?
The alloy C276 plate is an austenitic grade designed to perform well in oxidizing and reducing environments. Most austenite grades are non-magnetic in nature, but the plates in the C276 grade have a magnetic permeability at 15.9 kA/m of 1.002.
Searching for Nickel Alloy C276 Hot Rolled Plate? We supply Hastelloy Alloy C276 Cold rolled coil, DIN 2.4819 Sheet in wide range of sizes and thickness, ASME SB 575 UNS N10276 Strips Manufacturer in India
Table of Content
Hastelloy C276 Plate Specification
| Standards | Designation |
|---|---|
| ASME | SB 575 |
| ASTM | B 575 |
| Specification | ASTM / ASME B575 / SB575 |
|---|---|
| Length | 3m, 2.44m, 2m, or as required |
| Tolerances (width / thickness) |
|
| Finish | 2B, SATIN, 2D, Cold rolled sheet (CR), BA NO (8), Hot rolled plate (HR), 1D, No.1 finish hot rolled, No.4, 8K, BA, hairline, mirror, brush, etc. |
| Dimensions |
|
| Hardness | Quarter Hard, Hard, Soft, Half Hard, Spring Hard |
| Thickness | From 0.1 upto 100 mm |
| Shapes | Tread plate, descaled, Blank (Circle), sheared, Flats, soft annealed, Clad Plate, Checker Plate, Flat Shim, Coils, Rolling Plate, Foils, Flat Sheet, Rolling Sheet, Shim Sheet, Plate, Plain Sheet, Strip, annealed, Sheet, Rolls and Hastelloy Plate Suppliers & Manufacturers |
| Width | Between 10 to 2500 mm |
| Hs Code | 75062000 |
Hastelloy C276 Sheet Chemical Composition
| Hastelloy C276 | Analysis |
|---|---|
| Co | 2.5 max |
| Ni | Bal |
| Mn | 1.0 max |
| Mo | 15 – 17 |
| C | 0.01 max |
| Cr | 14.5 – 16.5 |
| V | 0.35 max |
| Fe | 4 – 7 |
| P | 0.04 max |
| W | 3 – 4.5 |
| Si | 0.08 max |
| S | 0.03 max |
Hastelloy Alloy C276 Plate Mechanical Properties
| Element | Tensile Properties | Density | Yield Properties (0.2%Offset) | Melting Point | Elongational |
|---|---|---|---|---|---|
| Hastelloy C276 Plate And Sheet | Psi – 1,15,000 , MPa – 790 | 8.89 g/cm3 | Psi – 52,000 , MPa – 355 | 1370 °C (2500 °F) | 40 % |
ASME SB 575 UNS N10276 material Equivalent
| Russia | Europe | Europe | America | Russia | Japan | |
|---|---|---|---|---|---|---|
| STANDARD | GOST | WERKSTOFF NR. | EN | UNS | OR | JIS |
| Alloy C276 | ХН65МВУ | 2.4819 | NiMo16Cr15W | N10276 | ЭП760 | NW 0276 |
Alloy C276 SB575 Coil Physical Properties
| Density | Specific Heat | Melting Range | Magnetic Permeability | ||||
|---|---|---|---|---|---|---|---|
| 8.89 | 0.321 | 427 | 0.102 | 1323-1371 | 2415-2500 | 1.0002 | 1.0002 |
| g/cm3 | lb/in3 | J/kg*°C | Btu/lb.°F | °C | °F | 15.9 kA/m | 200 oersted |
Know more about DIN 2.4819 Foil, Hastelloy C276 Rolling Sheets hardness, Finishes, Weight and Gauge Chart by Retired Engineers of JSW Steel Limited. Nickel Alloy C276 Perforated Plate available in sizes 10" x 20" x .375" thick, 1500 X 3000 X 50MM, and 3mm Thickness in India
Hastelloy Alloy C276 Sheet Thickness
| Hastelloy C276 plate Thickness (in mm) | |
|---|---|
| 0.02, Temper: Half hard | 0.0005, Temper: As rolled |
| 0.02, Temper: Annealed | 0.0004, Temper: As rolled |
| 0.025, Temper: Half hard | 0.00076, Temper: As rolled |
| 0.025, Temper: Annealed | 0.00065, Temper: As rolled |
| 0.030, Coil width: 15.05, Temper: Half hard | 0.001, Temper: As rolled |
| 0.05, Temper: Half hard | 0.002, Temper: Half hard |
| 0.038, Temper: Annealed | 0.002, Temper: As rolled |
| 1.00, Temper: Annealed | 0.0025, Temper: As rolled |
| 0.075, Temper: Half hard | 0.0025, Temper: As rolled, Condition: Surface oxide |
| 0.015, Coil width: 0.03, Temper: Half hard | 0.0125, Temper: Half hard |
| 2.00, Temper: Half hard | 0.005, Temper: Quarter hard |
| 2.00, Temper: 1/4 Hard | 0.005, Temper: Half hard |
| 3.00, Temper: 1/4 Hard | 0.01, Temper: Half hard |
| 3.00, Temper: Annealed | 0.0075, Temper: Half hard |
| 6.035, Temper: Hard | 0.01, Coil width: 10, Temper: Half hard |
| 0.015, Temper: Half hard | |
C276 Hastelloy Plate Melting Range
| Melting Range |
|---|
| °F : 2415-2500 °C: 1325-1370 |
Alloy C-276 Cold Rolled Plate Processing
- Forming Drilling/ Machining
- Testing
- Grinding
- Cutting
Types of Hastelloy C276 Plate
Hastelloy C276 Clad Plate
ASME SB 575 UNS N10276 material
Alloy C276 SB575 Coil
SB 575 Hastelloy C276 Circle
ASTM B575 UNS N10276 Strip
Alloy C-276 Cold Rolled Plate
DIN 2.4819 Polished Plate
ASTM B575 Hastelloy C276 Hot Rolled Plate
Alloy C276 Perforated Sheet
Astm B575 Hastelloy C276 Shim Sheet
Asme Sb575 Alloy C276 Perforated Sheet
Hastelloy C276 Coil
Hastelloy C276 SB575 4mm Thick Plate
Hastelloy C-276 UNS N10276 Cold Rolled Plate
Hastelloy UNS N10276 Polished Cold Drawn Plate
Hastelloy C276 N10276 Slitting Coil
2.4819 Alloy C276 Flat Plate
ASTM B575 C276 Hastelloy 2D Plate
ASTM B575 Hastelloy C276 Hot Rolled Plate Dimensions Chart
| Hastelloy C276 plates Dimensions Of Metric | ||
|---|---|---|
| finish Surface | Width (millimeter) | Thickness (millimeter) |
| 2R – Cold rolled, bright annealed | maximum 1524 | 0.25–3.5 |
| 2B – Cold rolled, heat treated, pickled, skin passed | maximum 2032 | 0.25–8.0 |
| 2H – Work hardened | maximum 1524 | 0.4–6.35 |
| 2D – Cold rolled, heat treated, pickled | maximum 1524 | 0.4–6.35 |
| Polished, brushed | maximum 1524 | 0.5–4.0 |
| 2E – Cold rolled, heat treated, mechanically descaled | maximum 2032 | 0.4–8.0 |
Supplier and Exporter of UNS N10276 Strips in Mumbai, Check Hastelloy C276 Sheet price per KG in India
ASTM B575 Hastelloy C276 Shim Sheet Gauge Chart
| Gauge Number | Inches | MM |
|---|---|---|
| 8 | .017187 | 4.0365 |
| 9 | .015625 | 3.0968 |
| 10 | .014062 | 3.0571 |
| 11 | .0125 | 3.0175 |
| 12 | .010937 | 2.0778 |
| 14 | .007812 | 1.0984 |
| 16 | .00625 | 1.0587 |
| 18 | .0050 | 1.0270 |
| 20 | .00375 | .09525 |
| 22 | .003125 | .07937 |
| 24 | .0025 | .0635 |
| 26 | .001875 | .0476 |
| 28 | .001562 | .0396 |
| 30 | .00125 | .03175 |
Nickel Alloy C276 Sheet Weight Calculation Formula
| Thickness In Inches | Hastelloy C276 plate Density | Hastelloy C276 plate Weight (Unit Area) |
|---|---|---|
| 3/16" | 0.315 lbs/in³8.72 g/cm³ | 0.06000 lbs/in²42.184176 kilogram/m² |
| 1/4" | 0.315 lbs/in³8.72 g/cm³ | 0.08 lbs/in²56.245568 kilogram/m² |
| 3/8" | 0.315 lbs/in³8.72 g/cm³ | 0.121 lbs/in²85.0714216 kilogram/m² |
| 1/2" | 0.315 lbs/in³8.72 g/cm³ | 0.161 lbs/in²113.1942056 kilogram/m² |
| 5/8" | 0.315 lbs/in³8.72 g/cm³ | 0.196 lbs/in²137.8016416 kilogram/m² |
| 3/4" | 0.315 lbs/in³8.72 g/cm³ | 0.235 lbs/in²165.221356 kilogram/m² |
| 7/8" | 0.315 lbs/in³8.72 g/cm³ | 0.274 lbs/in²192.6410704 kilogram/m² |
| 1" | 0.315 lbs/in³8.72 g/cm³ | 0.313 lbs/in²220.0607848 kilogram/m² |
Nickel Alloy C276 Strips Size Chart
| Hole Centres (in mm) | Finish | Tck mm | O/A | Hole Dia (in mm) | Full Sheet Size mm |
|---|---|---|---|---|---|
| 1.05 | 2B | 0.06 | 23% | 0.075 | 2000 x 1000 |
| 2 | 2B | 1.00 | 23% | 1 | 2000 x 1000 |
| 2.06 | 2B | 1.00 | 30% | 1.05 | 2000 x 1000 |
| 3.05 | 2B | 1.00 | 30% | 2 | 2000 x 1000 |
| 3.05 | 2B | 1.00 | 30% | 2 | 2000 x 1000 |
| 5 | 2B | 1.00 | 33% | 3 | 2000 x 1000 |
| 5.06 | 2B | 1.00 | 46% | 4 | 2000 x 1000 |
| 8 | 2B | 1.00 | 35% | 5 | 2000 x 1000 |
| 8 | 2B | 1.00 | 51% | 6 | 2000 x 1000 |
| 10 | 2B | 1,0 | 58% | 8 | 2000 x 1000 |
Hastelloy C276 Plate Uses
- Chemical processing
- Pollution control
- Waste treatment
- Pulp & paper production
UNS N10276 Hastelloy C276 Foil Density
| Density |
|---|
| lb/in3 : 0.321 g/cm3 :8.89 |
C276 Hastelloy Shim Sheet Hs Code
| HS Code | Hastelloy C276 plate Description |
|---|---|
| 73041990 | HASTELLOY C276 PLATE TO SB 576 UNS N10276 SIZE:400 MM DIA X 6 MM THK |
| 75062000 | HASTELLOY C276 PLATE-335 MM OD X 6MM THK |
| 84195020 | Plate Heat Exchanger Assly Of PHE GX-026x 37-HastelloyC-276-EPDM-1P HE1531 |
| 75062000 | HASTELLOY C276 PLATE-135 MM OD X 6MM THK |
| 73041990 | HASTELLOY C276 PLATE TO SB 576 UNS N10276 SIZE:200 MM DIA X 6 MM THK |
Nickel Alloy C276 Clad Plate Tolerances
| Gauge | LB/Sq. Ft. | LB/Sq In. | Hastelloy C276 plate Gauge Tolerance | ||
|---|---|---|---|---|---|
| 72″ Wide | 96″ Wide | ||||
| 3/16 | 0.01875 | 8.0579 | 0.005958 | +.0045″ -.0010″ | +.0050″ -.0010″ |
| 7/32 | 0.02187 | 9.0870 | 0.006854 | ||
| 1/4 | 0.02500 | 11.0162 | 0.007750 | ||
| 5/16 | 0.03125 | 13.0746 | 0.009546 | ||
| 3/8 | 0.03750 | 16.0496 | 0.011456 | +.0055″ -.0010″ | +.0060″ -.0010″ |
| 7/16 | 0.04375 | 19.0080 | 0.013250 | ||
| 1/2 | 0.05000 | 21.0633 | 0.015044 | ||
| 9/16 | 0.05625 | 24.0247 | 0.016838 | ||
| 5/8 | 0.06250 | 26.0831 | 0.018633 | ||
| 11/16 | 0.06875 | 29.0415 | 0.020427 | ||
| 1 | 1.00000 | 42.0665 | 0.029628 | +.0070″ -.0010″ | +.0075 -.0010″ |
| 1-1/8 | 1.01250 | 47.0833 | 0.033217 | ||
| 1-1/4 | 1.02500 | 53.0001 | 0.036806 | ||
| 1-3/8 | 1.03750 | 58.0169 | 0.040395 | ||
| 1-1/2 | 1.05000 | 63.0337 | 0.043984 | ||
| 1-3/4 | 1.07500 | 73.0672 | 0.051161 | ||
| 4 | 4.00000 | 168.0264 | 1.016850 | +.0200″ -.0010 | |
| 3 | 3.00000 | 126.0301 | 0.087709 | +.0160″ -.0010″ | |
| 3-1/2 | 3.05000 | 146.0972 | 1.002064 | ||
| 3/4 | 0.07500 | 32.0123 | 0.022308 | +.0060″ -.0010″ | +.0065″ -.0010″ |
| 13/16 | 0.08125 | 34.0707 | 0.024102 | ||
| 7/8 | 0.08750 | 37.0291 | 0.025897 | ||
| 15/16 | 0.09375 | 39.0875 | 0.027691 | ||
| 2 | 2.00000 | 84.0008 | 0.058339 | +.0125″ -.0010″ | +.0150″ -.0010″ |
| 2-1/8 | 2.01250 | 89.0610 | 0.062229 | ||
| 2-1/4 | 2.02500 | 94.0777 | 0.065817 | ||
| 2-1/2 | 2.05000 | 105.0113 | 0.072995 | ||
| 2-3/4 | 2.07500 | 115.0449 | 0.080173 | ||
2.4819 Alloy C276 Flat Plate Flatness Tolerances
| Specified Thickness (t), in. (mm) | Flatness Tolerance for Thicknesses Given, in. (mm) |
|---|---|
| 3/8 (9.052) <= t < 1/2 (12.070) | 5/16 (7.09) |
| 1/4 <= t < 3/8 (9.052) | 3/8 (9.05) |
| 1 (25.040) <= t < 1-1/2 (38.010) | 1/4 (6.04) |
| t < 1/4 (6.035) | 7/16 (11) |
| 3/4 (19.005) <= t < 1 (25.040) | 5/16 (7.09) |
| t >=4 (101.060) | 1/4 (6.04) |
| 1 1/2 (38.010) < = t < 4 (101.060) | 1/4 (6.04) |
| 1/2 (12.070) <= t < 3/4 (19.005) | 5/16 (7.09) |
ASTM B575 C276 Hastelloy 2D Plate Surface Finish
- #4 Architectural Finish
- #6 Finish
- True #8 Mirror Finish
- #3 Finish
- #8 Mirror Finish
- #4 Dairy or Sanitary Finish
- #7 Finish
Don't forget to check and compare our price of Hastelloy C276 Grade Shim sheet stock with 2B/ BA/ HL/ NO.1 finish. We provide Hastelloy C276 Lining plate, DIN 2.4819 Chequered Plate and Perforated Sheet with instant delivery.
Hastelloy C276 Plate Price
| Price of C276 Clad Plate | Hastelloy C276 Plate Price in India (INR) | Hastelloy Plate Price in USD | Alloy C276 Plate Price in UAE Dirham |
|---|---|---|---|
| HASTELLOY (R) C-276 ALLOY SHEET (NICKEL ALLOY SHEET) | INR 2,319/ KG | $166.70 | 115.26 UAE Dirham |
| HASTELLOY(R)C - 276 ALLOY SHEET 0.1250 IN THK (MIN/MAX RANGE : 0.1200 - 0.1300), 48.0000 IN WIDE, 96.0600 IN LONG NICKEL | INR 1,780/ KG | $24.09 | 88.47 UAE Dirham |
| HASTELLOY (R) C-276 ALLOY SHEET 0.0630X48X144 | INR 201,772/ PCS | $2730.38 | 10028.42 UAE Dirham |
| HASTELLOY (R) C-276 NICKEL ALLOY SHEET 0.125 THK,48.000 WIDE, 96.0600 LONG | INR 2,090/ KG | $28.28 | 103.88 UAE Dirham |
| NICKEL ALLOY SHEET HASTELLOY(R) C276-0.0250*15.1570*37.0090-76 PCS(CHEM COMP:C-0.003%,CO-1.03%,CR-15.12%,FE-5.11%,MN-0.5 | INR 3,326/ KG | $45.01 | 165.32 UAE Dirham |
Hastelloy Plate Inventory
| C276 Clad Plate | Alloy C276 Plate |
| Hastelloy C276 Plate | ASTM B575 UNS N10276 |
| Hastelloy C276 Sheet | Nickel Alloy C276 Strips |
| Hastelloy Plate | 2.4819 Plate |
| Hastelloy Alloy C276 Plate | Hastelloy C276 Strips |
| ASME SB 575 UNS N10276 material | Hastelloy C276 Coil |
| 2.4819 Hastelloy C-276 Plate | Hastelloy C276 Clad Plate |
| Hastelloy C276 ASTM B575 Sheet | 2.4819 Hastelloy C276 Sheet |
| Alloy C276 SB575 Coil | SB 575 Hastelloy C276 Strips |
| SB 575 Hastelloy C276 Circle | UNS N10276 Hastelloy C276 Foil |
| 2.4819 Alloy C 276 Plate | Alloy Hastelloy C276 Coil |
| Hastelloy Alloy C276 Sheet | Hastelloy C276 SB575 4mm Thick Plate |
| UNS N10276 Plates | Hastelloy C276 Alloy Strip Tape |
| ASTM B575 UNS N10276 Hastelloy C276 Plate | Alloy C276 Hastelloy Hot Rolled Plate |
| ASTM B575 UNS N10276 Strip | C276 Hastelloy Shim Sheet |
| C276 Hastelloy Plate | Hastelloy C276 Grade Shim Stock |
| Alloy C-276 Cold Rolled Plate | Hastelloy C-276 UNS N10276 Cold Rolled Plate |
| DIN 2.4819 Polished Plate | Hastelloy UNS N10276 Polished Cold Drawn Plate |
| ASTM B575 Hastelloy C276 Hot Rolled Plate | Hastelloy C276 N10276 Slitting Coil |
| Alloy C276 Perforated Sheet | Haynes Alloy C276 N10276 Polished Plate |
| Astm B575 Hastelloy C276 Shim Sheet | Nickel Alloy C276 Clad Plate |
| Nickel Alloy C276 Cold Rolled Sheet | 2.4819 Alloy C276 Flat Plate |
| Asme Sb575 Alloy C276 Perforated Shee | ASTM B575 C276 Hastelloy 2D Plate |
| Nickel Alloy C276 Sheet | Hastelloy C276 ASTM B575 Polish Plate |
Searching for
Hastelloy C276 Plate Supplier in your country? Checklist of material we export in the following areas.
Hastelloy C276 Plate
Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).
Hastelloy C276 Sheet
Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).
Hastelloy Alloy C276 Plate
USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.
2.4819 Alloy C 276 Plate
Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.
ASTM B575 UNS N10276 Hastelloy C276 Plate
Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.
SB 575 Hastelloy C276 Strips
France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.