Alloy Steel UNS K11597 Flat Bar and ASME SA 182 F11 Class 1 Hex Bar Supplier in India

ASTM A182 F11 Round Bar

ASTM A182 F11 Round Bar vs Rod
ASTM A182 F11 round bars and rod can be used interchangeably in the industry. These items can be distinguished on some features.

  • ASTM A182 F11 round bars is designed with a uniform cross-section area that is smaller in size compared to its actual length. ASTM A182 F11 rod is straight in alignment and can be shaped in circular cross sections.
  • A rod in this grade is completely sealed without any openings. An A182 F11 round bars is designed with a hollow opening.

ASTM A182 Grade F11 Class 2 Bars vs ASTM A182 Gr.f11 Cl.1 Bars
Class 1 and class 2 of ASTM A182 F11 bars are two distinct types that can be distinguished from certain features.

  • ASTM A182 F11 Class 2 bars is designed with superior strength as compared to ASTM A182 Gr.f11 Cl.1 bars
  • Class 1 bars have slightly better elongation properties than class 2 bars in the F11 grade.
  • F11 class 2 bars have higher hardness than the F11 class 1 bars.

ASTM A182 and ASME SA 182 F11 Round Bars
ASTM and ASME grades are the oldest and most common grades used to manufacture the A182 F11 round bars. These standard grades are nearly identical but can be differentiated based on certain aspects.

  • ASTM A182 F11 round bars belongs to a grade that covers non-pressurized grades. These bars issues properties of the material through different standards that are intended for use as design values for ASME items. The grade covers over 12,000 standards.
  • ASME SA 182 F11 round bars is specified for use in pressurized vessel grades. These grades cover boilers, pressure vessels, heat exchangers, storage containers, etc. The grade covers about 600 technical codes.

Check specification of ASTM A182 F11 Class 1 / 2 / 3 Round Bars, we supply Alloy Steel F11 Hex Bar, AS A182 Gr. F11 Rods stock at best price

Alloy Steel F11 Round Bar Specification

Specifications ASTM A182, ASME SA182
Thickenss From 0.5 to 500mm Dia
Range
5 to 500mm Diameter in 100 to 6000mm Length
Diameter
Between 10 to 200 mm
Dimensions EN, DIN, JIS, ASTM, BS, AISI, ASME
High Speed Steel (HSS), HCHCR & OHNS in Grade
T-42, T-15, EN52, M3, M2, H13, M35, T-1, M42, T-4, D3, D2, H11, OHNS-01
Length From 1000 To 6000 mm Long
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Finish Rough Turned, Black, Bright Polished, NO.4 Finish, Matt Finish, BA Finish

Alloy Steel UNS K11597 Bars Price List

Products Diameter Length Finish Temper Diameter Tolerance Length Tolerance Price
ROUND BARS TYPE SOLID MATERIAL : LOW ALLOY STEEL ASTM A182, GR F11 CL 2, SIZE : 40 MM, LENGTH : 3 MTR 1 in 1 ft Turned, Ground, And Polished Cold Finished/Heat Treated +0.0000/-0.0010 in +/-1.000 in $18.50 / each
ALLOY STEEL ROUND BARS TO ASTM A 182 F 11 GR III IN 10 FEET LENGTH. SIZE: 53 MM DIA 1 1/4 in 6 ft +0.0000/-0.0010 in +/-6.000 in $231.42 / each
ROUND BARS ASTM A182 GR F11 SIZE : 12.7MM DIA X 3 MTR LNG 1 1/2 in 6 ft +0.0000/-0.0010 in +/-6.000 in $302.31 / each
SUPER DUPLEX ROUND BARS,ASTM A182 GR.F11,UNS 32760. SIZE:100MM DIA X 300MM LONG 1 3/4 in 1 ft +0.0000/-0.0015 in +/-1.000 in $58.56 / each
ALLOY STEEL ROUND BARS TO ASTM A182 F11CL.1 SIZE: 80 MM DIA X 3 MTRS LG 1 3/4 in 6 ft +0.0000/-0.0015 in +/-6.000 in $344.01 / each
ALLOY STEEL ROUND BARS, SPEC:ASTM A182, F11, SIZE: 25MM X 5 MTR LONG. 2 in 6 ft +0.0000/-0.0015 in +/-6.000 in $369.02 / each

Types of ASTM A182 F11 Round Bar

Alloy Steel UNS K11597 Flat Bar
Alloy Steel UNS K11597 Flat Bar
Alloy Steel UNS K11597 Flat Bar
F11 Alloy Steel Bright Bar
F11 Alloy Steel Bright Bar
F11 Alloy Steel Bright Bar
Chrome Moly F11 Hollow Bar
Chrome Moly F11 Hollow Bar
Chrome Moly F11 Hollow Bar
ASTM A182 F11 Polished Round Bar
ASTM A182 F11 Polished Round Bar
ASTM A182 F11 Polished Round Bar
Alloy Steel F11 T-Bar
Alloy Steel F11 T-Bar
Alloy Steel F11 T-Bar
Alloy Steel Werkstoff Nr. 1.7335 Triangle Bar
Alloy Steel Werkstoff Nr. 1.7335 Triangle Bar
Alloy Steel Werkstoff Nr. 1.7335 Triangle Bar
Alloy Steel ASTM A182 F11 Rectangular Bar
Alloy Steel ASTM A182 F11 Rectangular Bar
Alloy Steel ASTM A182 F11 Rectangular Bar
ASTM A182 Grade F11 Half-Round Bar
ASTM A182 Grade F11 Half-Round Bar
ASTM A182 Grade F11 Half-Round Bar
Alloy Steel SA182 F11 Rod
Alloy Steel SA182 F11 Rod
Alloy Steel SA182 F11 Rod
ASTM A182 F11 Round Bar
ASTM A182 F11 Round Bar
ASTM A182 F11 Round Bar
ASME SA182 Chrome Moly F11 Threaded Bar
ASME SA182 Chrome Moly F11 Threaded Bar
ASME SA182 Chrome Moly F11 Threaded Bar
Alloy Steel Gr F11 Half Round Bar
Alloy Steel Gr F11 Half Round Bar
Alloy Steel Gr F11 Half Round Bar
A182 Gr. F11 Cold Drawn Bar
A182 Gr. F11 Cold Drawn Bar
A182 Gr. F11 Cold Drawn Bar
Grade F11 Hot Rolled Bar
Grade F11 Hot Rolled Bar
Grade F11 Hot Rolled Bar
ASTM A182 Gr. F11 Precision Ground Stock
ASTM A182 Gr. F11 Precision Ground Stock
ASTM A182 Gr. F11 Precision Ground Stock
CrMo F11 Rods
CrMo F11 Rods
CrMo F11 Rods
ASTM A182 Grade F11 Hexagonal Bar
ASTM A182 Grade F11 Hexagonal Bar
ASTM A182 Grade F11 Hexagonal Bar
ASME SA 182 F11 class 1 Rebar
ASME SA 182 F11 class 1 Rebar
ASME SA 182 F11 class 1 Rebar

Manufacturer and exporter of Cold Drawn Alloy A182 F11 Bars and ASTM A182 F11 Class 1 Round Bars in India, view ASTM A182 13CrMo44 Steel Hot Rolled Bar, ASME SA182 F11 Round Bar/ Flat/ Hot rolled/ cold drawn Bar and Half Rounds sizes and price list ex Mumbai

F11 Alloy Steel Round Bar Application Industries

Off-Shore Oil Drilling Companies Pharmaceutical Equipment
Power Generation Chemical Equipment
Petrochemicals Sea Water Equipment
Gas Processing Heat Exchangers
Specialty Chemicals Condensers
Pharmaceuticals Pulp and Paper Industry

Chrome Moly F11 Round Bar Documentation

  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Guarantee Letter
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • NABL approved Laboratory Test Reports
  • Form A for the purposes of the Generalized System of Preferences (GSP)
  • Heat Treatment Charts
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Quality Assurance Plan (QAP)
  • Fumigation Certificates
  • Raw Material Test Reports
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Material Traceability Records
Looking for Alloy Steel DIN 1.7335 Bar and ASTM A182 F11 Alloy Steel Hex Bars manufacturers in India? Call for small piece of Alloy Steel F11 Round Bars and Alloy Steel ASTM A182 F11 Forged Bar to test before buying

Chrome Moly F11 Flat Bar Chemical Composition

Grade P C S Mn Cr Si Mo
Alloy Steel F11 0.03 0.15 max 0.03 0.3-0.6 1 - 1.5 0.5 - 1 0.044 - 0.65

ASME SA182 Chrome Moly F11 Polished Bar Mechanical Properties

Grade Yield Properties 0.2% Proof (MPa) min Tensile Properties (MPa) min Elongation (% in 50mm) min
A182 F11 415 205 20

ASTM A182 F11 Round Bar Equivalent

STANDARD EN WERKSTOFF NR. DIN UNS
ASTM A182 F11 1.1/4Cr-1/2Mo 1.7335 13CRM044 K11572
We stock and supply ASTM A276 Grade F11 Black Bar manufacturers in India for sale in cut to sizes, Supplier of Alloy Steel A182 F11 Bars, pump shaft, Flat, hollow Bars and rods as per ASTM A276/ A479 available in round, bright, flat, angle and hexagonal

Alloy Steel Gr F11 Bars Test Certificates

  • EN 10204/3.1B,
  • Raw Materials Certificate
  • Third Party Inspection Report, etc
  • 100% Radiography Test Report

CrMo F11 Triangular Bar Size Chart

Type SIZES (Inches) SIZES (mm) ISO Tolerance
Cold Drawn and Ground 5/6" – 2.50" 10.00 – 75.00 h8-h9-h10-h11
Cold Drawn and Polish 1/8" – 3.00" 3.00 – 75.00 h8-h9-h10-h11
Peeled and Polished 1.50" – 6.00" 40.00 – 150.00 h11, h11-DIN 1013
Peeled and Ground 3/4″ – 2.00" 20.00 – 50.00 h9-h10-h11

5.0 45.0
6.0 50.0
7.0 55.0
8.0 60.0
9.0 65.0
10.0 70.0
12.0 75.0
16.0 80.0
20.0 90.0
25.0 100.0
30.0 130.0
35.0 160.0
40.0 200.0
Do not forget to compare our price with other ASME SA 182 Alloy Steel F11 Bars Suppliers in India, Get ASTM A182 Grade F11 Round Bars conforms to NACE MR0175/ ISO 15156 at factory price in Mumbai

ASME SA 182 F11 class 1 Rod Weight Chart

SHAPE POUNDS PER FOOT
Square D2 x 3.4
Round D2 x 2.67
Flat Thickness (in.) x Width (in.) x 3.4
Hexagon D2 x 2.945

SIZE IN INCHES OCTAGON ROUND HEXAGON SQUARE SIZE IN INCHES SQUARE ROUND HEXAGON OCTAGON
1/16 .011 .010 .012 .013 11/16 1.607 1.262 1.392 1.333
5/64 .018 .017 .019 .022 45/64 1.681 1.320 1.456 1.394
3/32 .024 .023 .025 .029 23/32 1.756 1.380 1.521 1.487
7/64 .033 .031 .034 .039 47/64 1.834 1.440 1.588 1.521
1/8 .044 .042 .046 .053 3/4 1.913 1.502 1.656 1.586
9/64 .056 .053 .058 .067 25/32 2.075 1.630 1.797 1.721
5/32 .069 .065 .072 .083 13/16 2.245 1.763 1.944 1.862
11/64 .083 .079 .087 .100 27/32 2.421 1.901 2.096 2.008
3/16 .099 .094 .104 .120 7/8 2.603 2.045 2.254 2.159
13/64 .116 .110 .121 .140 29/32 2.792 2.193 2.418 2.316
7/32 .135 .128 .141 .163 15/16 2.988 2.347 2.588 2.479
15/64 .155 .147 .162 .187 31/32 3.191 2.506 2.763 2.646
1/4 .176 .167 .184 .213 1 3.400 2.670 2.945 2.820
17/64 .199 .188 .207 .240 1-1/16 3.838 3.015 3.324 3.183
9/32 .223 .211 .233 .269 1-1/8 4.303 3.380 3.727 3.569
19/64 .248 .235 .259 .300 1-3/16 4.795 3.766 4.152 3.977
5/16 .275 .261 .288 .332 1-1/4 5.313 4.172 4.601 4.407
21/64 .304 .288 .318 .360 1-5/16 5.857 4.600 5.072 4.858
11/32 .334 .316 .348 .402 1-3/8 6.428 5.049 5.567 5.332
23/64 .364 .345 .381 .439 1-7/16 7.026 5.518 6.085 5.827
3/8 .397 .376 .414 .478 1-1/2 7.650 6.008 6.625 6.345
25/64 .431 .408 .450 .519 1-9/16 8.301 6.519 7.189 6.885
13/32 .466 .441 .486 .561 1-5/8 8.978 7.051 7.775 7.446
27/64 .502 .475 .524 .605 1-11/16 9.682 7.604 8.385 8.030
7/16 .540 .511 .564 .651 1-3/4 10.41 8.178 9.018 8.634
29/64 .579 .548 .604 .698 1-13/16 11.17 8.773 9.673 9.265
15/32 .620 .587 .647 .747 1-7/8 11.95 9.388 10.35 9.911
31/64 .662 .627 .692 .798 1-15/16 12.76 10.02 11.05 10.58
1/2 .705 .668 .736 .850 2 13.60 10.68 11.78 11.28
33/64 .750 .710 .783 .904 2-1/16 14.46 11.36 12.53 11.99
17/32 .796 .754 .831 .960 2-1/8 15.35 12.06 13.30 12.73
35/64 .844 .799 .881 1.017 2-3/16 16.27 12.78 14.09 13.49
9/16 .892 .845 .932 1.076 2-1/4 17.21 13.52 14.91 14.27
37/64 .943 .893 .985 1.136 2-5/16 18.18 14.28 15.75 15.08
19/32 .994 .941 1.038 1.199 2-3/8 19.18 15.06 16.61 15.91
39/64 1.048 .992 1.094 1.263 2-7/16 20.20 15.87 17.49 16.75
5/8 1.102 1.043 1.150 1.328 2-1/2 21.25 16.69 18.40 17.62
41/64 1.207 1.096 1.209 1.395 2-9/16 22.33 17.53 19.34 18.52
21/32 1.214 1.150 1.268 1.464 2-5/8 23.43 18.40 20.29 19.43
43/64 1.272 1.205 1.329 1.535 2-11/16 24.56 19.29 21.27 20.37

SIZE IN INCHES OCTAGON ROUND HEXAGON SQUARE SIZE IN INCHES SQUARE ROUND OCTAGON
2-3/4 21.33 20.19 22.27 25.71 6 122.4 96.13 101.5
2-3/16 22.31 21.12 23.29 26.90 6-1/16 125.0 98.15 103.6
2-7/8 23.31 22.07 24.34 28.10 6-1/8 127.6 100.2 105.8
2-5/16 24.33 23.04 25.41 29.34 6-3/16 130.2 102.2 108.0
3 25.38 24.03 26.50 30.60 6-1/4 132.8 104.3 110.2
3-1/16 26.45 25.05 27.62 31.89 6-5/16 135.5 106.4 112.4
3-1/8 27.54 26.08 28.76 33.20 6-3/8 138.2 108.5 114.6
3-3/16 28.65 27.13 29.92 34.55 6-7/16 140.9 110.7 116.9
3-1/4 29.79 28.21 35.91 6-1/2 143.7 112.8 119.1
3-5/16 30.94 29.30 37.21 6-9/16 146.4 115.0 121.4
3-3/8 32.12 30.42 38.73 6-5/8 149.2 117.2 123.8
3-7/16 33.32 31.55 40.18 6-11/16 152.1 119.4 126.1
3-1/2 34.54 32.71 41.6 6-3/4 154.9 121.7 128.5
3-9/16 35.79 33.90 43.15 6-13/16 157.8 123.9 130.9
3-5/8 37.07 35.09 44.68 6-7/8 160.7 126.2 133.3
3-1/16 38.34 36.31 46.23 6-15/16 163.6 128.5 135.7
3-3/4 39.65 37.55 47.81 7 166.6 130.9 138.2
3-3/16 40.99 38.81 49.42 7-1/16 169.6 133.2 140.7
3-7/8 42.34 40.10 51.05 7-1/8 172.6 135.6 143.2
3-5/16 43.72 41.40 52.71 7-3/16 175.6 138.0 145.7
4 45.12 42.73 54.40 7-1/4 178.7 140.4 148.2
4-1/16 46.54 44.07 56.11 7-5/16 181.8 142.8 150.8
4-1/8 47.98 45.44 57.85 7-3/8 184.9 145.2 153.4
4-3/16 49.45 46.83 59.62 7-7/16 188.1 147.7 156.0
4-1/4 50.93 48.23 61.41 7-1/2 191.3 150.2 158.6
4-5/16 52.44 49.66 63.23 7-5/8 197.7 155.3 164.0
4-3/8 53.98 51.11 65.08 7-3/4 204.2 160.4 169.4
4-7/16 55.53 52.58 66.95 7-7/8 210.9 165.6 174.9
4-1/2 57.10 54.08 68.85 8 217.6 170.9 180.5
4-9/16 58.70 55.59 70.78 8-1/4 230.9 181.8 192.0
4-5/8 60.32 57.12 72.73 8-1/2 245.7 192.9 203.8
4-1/16 61.96 58.68 74.71 8-3/4 259.6 204.4 215.8
4-3/4 63.63 60.25 76.71 9 275.4 216.3 228.4
4-3/16 65.32 61.85 78.75 10 340.0 267.0 282.0
4-7/8 67.02 63.46 80.80 11 411.4 323.1 341.2
4-5/16 68.75 65.10 82.89 12 489.6 384.4 406.1
5 70.50 66.76 85.00 13 575 451 476
5-1/16 72.27 68.44 87.14 14 666 523 552
5-1/8 74.07 70.14 89.30 15 765 601 634
5-3/16 75.89 71.86 91.50 16 871 684 721
5-1/4 77.72 73.60 93.71 17 982 772 814
5-5/16 79.59 75.36 95.96 18 1102 865 912
5-3/8 81.47 77.15 98.23 19 1227 964 1017
5-7/16 83.38 78.95 100.5 20 1360 1068 1127
5-1/2 85.30 80.78 102.9 21 1499 1177 1242
5-9/16 87.25 82.62 105.2 22 1645 1292 1363
5-5/8 89.23 84.49 107.6 23 1798 1412 1490
5-1/16 91.22 86.38 110.0 24 1958 1538 1622
5-3/4 9323 88.29 112.4 25 2125 1669 1760
5-3/16 95.27 90.22 114.9 26 2298 1805 1904
5-7/8 97.33 92.17 117.4 27 2478 1946 2053
5-5/16 99.41 94.14 119.9 28 2665 2093 2208

A182 Gr. F11 Rods Inventory

ASTM A182 F11 Round Bar Alloy Steel A182 F11 Round Bar
F11 Round Bar ASTM A182 Gr. F11 Alloy Steel Bright Bar
Alloy Steel F11 Round Bar A182 Gr. F11 Rods
Alloy Steel Werkstoff Nr. 1.7335 Round Bar Alloy Steel F11 Hot Rolled Bars
Alloy Steel UNS K11597 Bars Alloy Steel A182 F11 Forged Bars
F11 Alloy Steel Round Bar CrMo Round Rods
Chrome Moly F11 Round Bar Chrome Moly Bars Stockist
ASTM A182 F11 CrMo Hex Bar Alloy Steel ASTM A182 F11 Hot –Finished Round Bars
Chrome Moly F11 Flat Bar A182 CrMo Alloy Steel F11 Cold Drawn Round Bars
Alloy Steel F11 Bar Chrome Moly ASME SA182 F11 Black Round Bar
Alloy Steel F11 Bright Bar ASTM A182 CrMo Alloy Steel Gr.F11 Bright Round Rod
F11 Alloy Steel Rectangular Bar Grade F11 Cr-Mo ASTM A182 Forged Bars
ASME SA182 Chrome Moly F11 Polished Bar ASTM A182 Gr.F11 Alloy Steel Peeled / Turned Bars
Chrome Moly F11 Forged Bar CrMo Alloy Steel ASTM A182 Grade F11 Hex Rods
Alloy Steel Gr F11 Bars SA182 Cr-Mo Alloy Steel F11 Forged Round Bars
CrMo F11 Triangular Bar UNS K11597 Chrome Moly Alloy Steel ASTM A182 Polished Bars
Chrome Moly F11 Hexagonal Bar ASME SA182 CrMo Alloy Steel Gr.F11 Hexagon Bars
Alloy Steel K11597 Bars Cr-Mo Alloy Steel ASTM A182 F11 Welding Rod
ASTM A182 Grade F11 Alloy Steel Round Bar Type SA182 F11 Chrome Moly Alloy Steel Square Bar
ASME SA 182 F11 class 1 Rod DIN 1.7335 Chrome Moly ASME SA182 Hot-Rolled Round Rods
A182 Gr. F11 Square Bar CrMo Alloy Steel A182 F11 Cold Finish Round Bar
ASME SA182 Chrome Moly Gr.F11 Bright Bars Alloy Steel ASTM A182 Grade F11 Flat Bar
Alloy Steel F11 Forged Bar Chrome Moly A182 Gr.F11 Rectangular Bars
F11 Cr-Mo A182 Bar ASME SA182 Alloy Steel Gr.F11 Octagons Bar
ASME SA 182 F11 Hex Bar Alloy Steel A182 F11 Threaded Rods
Grade F11 Cr-Mo A182 Bar Cr-Mo Alloy Steel SA182 F11 Spring Bars

ASTM A182 F11 Round Bar Testing

ASTM A182 F11 Round Bar Testing
  • Intergranular Corrosion (IGC) Test
  • Flaring Test
  • Flattening Test
  • Mechanical Testing Such as Tensile of Area
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Micro and MacroTest
  • Hardness Test
  • Pitting Resistance Test

Searching for

ASTM A182 F11 Round Bar supplier in your country? Checklist of material we export in the following areas.

Application Projects
P.M. Metal Logo

ASME SA182 Chrome Moly F11 Polished Bar

Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).

Application Projects
P.M. Metal Logo

ASTM A182 Grade F11 Alloy Steel Round Bar

Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).

Application Projects
P.M. Metal Logo

Alloy Steel A182 F11 Round Bar

USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.

Application Projects
P.M. Metal Logo

A182 Gr. F11 Rods

Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.

Application Projects
P.M. Metal Logo

Alloy Steel F11 Hot Rolled Bars

Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.

Application Projects
P.M. Metal Logo

Alloy Steel A182 F11 Threaded Rods

France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.