PM Metal Logo
Contact
Round Bar

Hastelloy C276 Round Bar

  • Home
  • Hastelloy C276 Round Bar

ASTM B574 UNS N10276 Rod and Alloy C276 Hex Bar Suppliers in India

Hastelloy C276 Round Bar

What is Hastelloy C276 Round Bar vs Rod?
Hastelloy C276 round bars and rods are high-performance superalloy grades. Both these modules are common components that are used interchangeably in the metal industry. These items have some similar features but can be differentiated from others.

  • A Hastelloy C276 round bar is designed with a uniform cross-section area that is smaller in size compared to its actual length. A Hastelloy C276 rod is straight in size and can be shaped in circular cross sections.
  • A round bar can be characterized by a hollow opening. A rod, on the contrary, is completely sealed with no openings.

Hastelloy C276 Hex Bar vs Flat Bar
Hastelloy C276 grade is designed in hex and flat shapes. Both the bars can be differentiated on certain aspects.

  • Hastelloy C276 hex bar is a six-sized metal component. A Hastelloy C276 flat bar is a four-sided module, wherein all sides have equal sides.
  • Hex bars are designed with a uniform polygonal cross-section. A flat bar is produced with a rectangular cross-sectional area.
  • Alloy C276 grade hex bar possesses a superior area to perimeter ratio as compared to the C276 flat bar.

Hastelloy C276 Welding Rod vs Threaded Rod

  • A Hastelloy C276 welding Rod is utilized to weld metal components in place. A welded rod is permanent and cannot be dismantled easily.
  • Hastelloy C276 threaded rod is produced with threads on its interior that correspond to the subsequent modules. A threaded rod can be dismantled or detached from the component easily.

Is Hastelloy Round Bar corrosion resistant?
Hastelloy round bar is a premier corrosion-resistant grade. These round bars corrode when they are exposed to corrosive and oxidative media for long periods. The alloys in this grade; however, show a good content of chromium, molybdenum, and nickel, giving them good tolerances and resistance in different stress-induced environments for a long span of time.

Looking for Hastelloy round bar manufacturers? Ready stock of Hastelloy square bar and ASME SB574 2.4819 Flat Bar in 3mm Thickness x 25mm Width

Table of Content

Hastelloy Round Bar Specification

ASME/ ASTM Standard ASTM / ASME B574 / SB574
Dimensions Schedule EN, JIS, DIN, AISI, BS, ASME, ASTM,
Dia in MIlimeter 0.1 up to 100 millimeter
Dual certified Manufacturers Dual certified Alloy C276 Round Bar Manufacturers in India, accordance to certify ASME SB574 and ASTM B574 American specifications
Sizes
 5 upto 500 millimeter
Length in MM 100 upto 3000 millimeter
Marking
  • Nominal Pipe Sizes
  • Specification
  • Grade
  • Supplier / Manufacturer’s Name or Custom Logo - on request
  • Heat Number
Finishes Rough, BA Finish, Polished, NO.4 Finish, Black, Matt Finish, Bright, Turned
Tolerance Chart K10, H11, H13, H8, K12 K9, H9, K11, H10, H12, or as per clients’ requirement
Form of Bar Hex, Round, Rectangle, Forging, Ingot, Square, Billet
Hastelloy C276 Round Bar Manufacturers in India

Hastelloy C276 Round Bar Price Price List

Produtcs Size In MM kg per meter Price in INR Price in UAE Dirham Price in USD
HASTELLOY C276 BRIGHT ROUND BAR 185 MMXLMM 25*25*2.0 1.43 2,052 27.43 100.69
NICKEL ALLOY ROUND BARS HASTELLOY C-276 20*20*2.5 1.35 1,317 17.60 64.62
HASTELLOY C-276 ROUND BARS (QTY- 3 PCS) (185MM x 450 MM) 30*30*2.5 2.14 2,048 27.37 100.49
HASTELLOY ROUND BAR AS PER ASTM B574,ALLOY (HASTELLOY C276), SIZE: 3/8 (9.53MM) DIA X 7 FT LONG 25*25*3.0 2.04 3,647 48.74 178.95
HASTELLOY C-276 ROUND BAR TO ASTM B 574GR. UNS NO.N10276 : SIZE: 22 MM DIA 40*40*1.5 1.81 31,649 423.01 1552.98
HASTELLOY C-276 ROUND BAR TO ASTM B 574GR. UNS NO.10276 NACE MR-0175 SIZE:25 MM DIA X 500 MM LENGTH 50*50*1.5 2.28 61,888 827.17 3036.77
HASTELLOY C276 ROUND BAR TO ASTM B 574GR. UNS NO. 10276 SIZE : 25 MM DIA X 3 MTR LONG 40*40*4.0 4.46 140,996 1884.50 6918.52

Types of Hastelloy C276 Round Bar

Hastelloy C276 Polished Round Bar
Hastelloy C276 Polished Round Bar
Hastelloy C276 Polished Round Bar
C276 T-Bar
C276 T-Bar
C276 T-Bar
Alloy C276 Triangle Bar
Alloy C276 Triangle Bar
Alloy C276 Triangle Bar
ASTM B574 Hastelloy C276 Flat Bar
ASTM B574 Hastelloy C276 Flat Bar
ASTM B574 Hastelloy C276 Flat Bar
C276 Hastelloy Bright Bar
C276 Hastelloy Bright Bar
C276 Hastelloy Bright Bar
Hastelloy C-276 Hollow Bar
Hastelloy C-276 Hollow Bar
Hastelloy C-276 Hollow Bar
Hastelloy UNS N10276 Round Bar
Hastelloy UNS N10276 Round Bar
Hastelloy UNS N10276 Round Bar
Nickel Alloy C276 Threaded Bar
Nickel Alloy C276 Threaded Bar
Nickel Alloy C276 Threaded Bar
C276 Alloy Half Round Bar
C276 Alloy Half Round Bar
C276 Alloy Half Round Bar
ASME SB 574 N10276 Rods
ASME SB 574 N10276 Rods
ASME SB 574 N10276 Rods
AMS 5750 Hexagonal Bar
AMS 5750 Hexagonal Bar
AMS 5750 Hexagonal Bar
ASTM B574 UNS N10276 Rebar
ASTM B574 UNS N10276 Rebar
ASTM B574 UNS N10276 Rebar
ASTM B574 Hastelloy Alloy C276 Cold Drawn Bar
ASTM B574 Hastelloy Alloy C276 Cold Drawn Bar
ASTM B574 Hastelloy Alloy C276 Cold Drawn Bar
Hastelloy DIN 2.4819 Hot Rolled Bar
Hastelloy DIN 2.4819 Hot Rolled Bar
Hastelloy DIN 2.4819 Hot Rolled Bar
Hastelloy JIS NW 0276 Precision Ground Stock
Hastelloy JIS NW 0276 Precision Ground Stock
Hastelloy JIS NW 0276 Precision Ground Stock
ASTM B574 Alloy C276 Rectangular Bar
ASTM B574 Alloy C276 Rectangular Bar
ASTM B574 Alloy C276 Rectangular Bar
Alloy N10276 Half-Round Bar
Alloy N10276 Half-Round Bar
Alloy N10276 Half-Round Bar
ASME SB574 Hastelloy Alloy C276 Rod
ASME SB574 Hastelloy Alloy C276 Rod
ASME SB574 Hastelloy Alloy C276 Rod

Alloy C276 Bar Weight Chart

Size kilogram / Meter kilogram / Foot Round Bar bar Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot
22 millimeter 2.979 0.908 1/8" 0.062 0.019 3 to 1/4" 41.996 12.800
20 millimeter 2.470 0.753 3 millimeter 0.055 0.017 3" 35.762 10.900
24 millimeter 3.543 1.080 4 millimeter 0.098 0.030 3 to 3/4" 55.780 17.001
7/8" 3.038 0.926 5/32" 0.095 0.029 3 to 1/2" 48.772 14.850
1" 3.970 1.210 5 millimeter 0.154 0.047 4 to 1/4" 72.249 21.908
25 millimeter 3.871 1.180 3/16" 0.141 0.043 4" 63.340 19.306
27 millimeter 4.490 1.368 6 millimeter 0.223 0.068 4 to 3/4" 90.249 27.366
26 millimeter 4.170 1.271 7/32" 0.190 0.058 4 to 1/2" 80.340 24.4487
30 millimeter 5.548 1.691 7 millimeter 0.298 0.091 5 to 1/2" 121.000 36.690
1 to 1/8" 5.033 1.534 1/4" 0.249 0.076 5" 99.940 30.461
32 millimeter 6.314 1.894 8 millimeter 0.398 0.120 6 to 1/2" 167.630 51.093
1 to 1/4" 6.349 1.924 5/16" 0.387 0.118 6" 143.900 43.860
35 millimeter 7.553 2.390 3/8" 0.557 0.170 7 to 1/2" 225.000 68.226
1 to 3/8" 7.550 2.303 9 millimeter 0.498 0.152 7" 196.000 59.432
38 millimeter 8.903 2.792 11 millimeter 0.748 0.228 10" 397.140 121.048
36 millimeter 7.999 2.438 10 millimeter 0.620 0.189 8" 254.55 77.586
40 millimeter 9.872 3.009 12 millimeter 0.889 0.271
1 to 1/2" 8.951 2.715 7/16" 0.761 0.232
1 to 3/4" 12.179 3.712 13 millimeter 1.043 0.318
1 to 5/8" 10.449 3.200 1/2" 0.994 0.303
1 to 7/8" 13.977 4.260 9/16" 1.256 0.383
45 millimeter 12.555 3.807 14 millimeter 1.207 0.368
50 millimeter 15.414 4.698 5/8" 1.551 0.473
48 millimeter 14.205 4.330 15 millimeter 1.391 0.424
2 to 1/8" 17.963 5.475 17 millimeter 1.791 0.543
2" 15.906 4.848 16 millimeter 1.578 0.481
60 millimeter 22.205 6.768 18 millimeter 2.001 0.610
2 to 1/4" 20.128 6.135 11/16" 1.880 0.573
2 to 3/8" 22.435 6.838 3/4" 2.237 0.682
2 to 1/2" 24.856 7.576
2 to 5/8" 27.409 8.354
2 to 3/4" 30.083 9.169

Hastelloy C276 Round Bar Size

US Bar Metric Japanese Canadian/ASTM
Bar Size Diameter(Inch) Diameter (millimeter) Bar Size Round Bar Size Diameter (millimeter) Diameter (millimeter2) Bar Size
#2 0.250 5 5 6 6 100 10M
#3 0.375 5.5 5.5 10 10 200 15M
#4 0.500 6 6 13 13 300 20M
#5 0.625 7 7 16 16 500 25M
#6 0.750 8 8 19 19 700 30M
#7 0.875 9 9 22 22 1000 35M
#8 1.000 10 10 25 25 1500 45M
#9 1.125 11 11 29 29 2500 55M
#10 1.250 12 12 32 32
#11 1.375 14 14 35 35
#12 1.500 16 16 38 38
#13 1.625 18 18 41 41
#14 1.750 20 20 44 44
#15 1.875 22 22 48 48
#16 2.000 25 25 51 51
#18 2.250 28 28 57 57
32 32
36 36
40 40
44 44
50 50

Hastelloy Alloy C276 Round Bar Tolerance

Tolerances for Cold Drawn Alloy C276 Round Bar
Shapes diameter , Size, or width across flats Permitted variation
milimeter milimeter
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100		 + 0 to - 0.070
+ 0 to - 0.085
+ 0 to - 0.100
+ 0 to - 0.120
+ 0 to - 0.140
Square and
hexagon		 ≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105		 + 0 to - 0.090
+ 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.250
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80		 + 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.250
+ 0 to - 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320		 + 0 to - 0.110
+ 0 to - 0.130
+ 0 to - 0.160
+ 0 to - 0.190
+ 0 to - 0.220
+ 0 to - 0.350
+ 0 to - 1.00
+ 1.00 to - 1.00

ASTM B574 Hastelloy C276 Flat Bar Sizes

  • Size: 5 To 500 millimeter
  • Diameter : 0.1 to 100 millimeter

C276 Hastelloy Round Bar Dimension

Diameter or
Width
(milimeter)		 round bars Weight per meter Sectional Area Perimeter
Round
(kilogram)		 Square
(kilogram)		 Round
(centimeter²)		 Square
(centimeter²)		 Square
(centimeter)		 Round
(centimeter)
5.0 0.15 0.20 0.20 0.25 2.0 1.57
5.5 0.19 0.24 0.24 0.30 2.2 1.78
6.0 0.22 0.28 0.28 0.36 2.4 1.88
7.0 0.30 0.38 0.38 0.49 2.8 2.20
8.0 0.39 0.50 0.50 0.64 3.2 2.51
9.0 0.50 0.64 0.64 0.81 3.6 2.83
10 0.63 0.73 0.79 1.00 4.0 3.14
11 0.75 0.95 0.95 1.21 4.4 3.46
12 0.89 1.13 1.13 1.44 4.8 3.77
14 1.21 1.54 1.54 1.96 5.6 4.40
16 1.58 2.01 2.01 2.56 6.4 5.03
18 2.00 2.54 2.54 3.24 7.2 5.65
20 2.47 3.14 3.14 4.00 8.0 6.28
22 2.98 3.80 3.80 4.84 8.8 6.91
25 3.85 4.91 4.91 6.25 10.0 7.85
28 4.83 6.15 6.16 7.84 11.2 8.80
32 6.31 8.04 8.04 10.24 12.8 10.05
36 7.99 10.17 10.18 12.96 14.4 11.31
40 9.86 12.56 12.57 16.00 16.0 12.57
45 12.49 15.90 15.90 20.25 18.0 14.14
50 15.41 19.62 19.64 25.00 20.0 15.71
56 19.34 24.62 24.63 31.36 22.4 17.59
63 24.47 31.16 31.17 36.69 25.2 19.79
71 31.08 39.57 39.59 50.41 28.4 22.31
80 39.46 50.24 50.27 64.00 32.0 25.13

We offer Cold Rolled/ Hot Rolled C276 Hastelloy Rectangular Bar and Nickel Alloy C276 Forged Bar as per American standards, Check live of price Hastelloy Alloy C276 cold drawn bar online, wide stock of C276 Alloy Bright Bar Ex Mumbai

Hastelloy UNS N10276 Cold Drawn Bar Melting Point

Element Hastelloy C276
Melting Point 1370 °C (2500 °F)

C276 Square Bar Size

Size in milimeter Average Weight
KG/MTR KG/FT
12 x 12 1.010 0.030
10 x 10 0.080 0.020
16 x 16 2.000 0.060
14 x 14 1.050 0.050
20 x 20 3.014 1.000
17 x 17 2.027 0.069
32 x 32 8.000 2.040
63 x 63 31.020 9.050
25 x 25 4.090 1.050
42 X 42 13.085 4.022
40 x 40 12.060 3.080
53 X 53 22.005 6.072
50 x 50 19.060 6.000
56 x 56 24.060 7.050

Hastelloy C276 Round Bar Benefits

  • certified to all major international specs
  • Highly controlled heat treatment with SCADA control
  • Available in shape of Round Bars | Hex | Square
  • Precision Straightened
  • Unique Packaging
  • Precision Tolerance
  • Mirror Finish
  • Close Length Tolerance

Alloy C276 UNS N10276 Forged Bar Chemical Composition

C276 Bar Cr C S Ni P Mo Fe Si Co Mn
14.5 – 16.5 0.01 Maximum 0.03 Maximum Balance 0.04 Maximum 15 – 17 4 – 7 0.08 Maximum 2.5 Maximum 1.0 Maximum
Why to pay extra when we provide Alloy C276 Bar in exact sizes as per international standard, Buy exact size 2.4819 Hastelloy C276 Rod, Nickel Alloy C276 Polished Bar and UNS N10276 Black Bar in cut to size at no extra cost

Nickel Alloy C276 Polished Bar Mechanical Properties

Melting Point Tensile Strength Density Yield Strength (0.2%Offset) Elongation
1370 °C (2500 °F) MPa – 790, Psi – 1,15,000 8.89 g/cm3 MPa – 355, Psi – 52,000 40 %

C276 Alloy Black Bar Equivalent

STANDARD AFNOR WERKSTOFF NR. JIS UNS EN GOST OR
Alloy C276 Bar – 2.4819 NW 0276 N10276 NiMo16Cr15W ХН65МВУ ЭП760

Hastelloy C276 Rod Length

USA : 40 feet
Metric system: standard length is 9 - 12 metres

Alloy C276 Rod Surface Finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

Hastelloy C276 Round Bar Condition

Hardened and tempered. H&T
Annealed ANN
Precipitation hardened. PH

Alloy C276 Hex Bar Size

Size in Inches Wt per Foot of hex bar Wt per Inch
1/4″ 0.0180 2.160
3/16″ 0.0104 1.248
3/8″ 0.0600 4.920
5/16″ 0.0290 3.480
1/2″ 0.0740 8.880
7/16″ 0.0560 6.72
5/8″ 1.150 13.80
9/16″ 0.0930 11.16
3/4″ 1.660 19.92
11/16″ 1.390 16.68
7/8″ 2.300 27.60
15/16″ 2.600 31.20
13/16″ 1.950 23.40
1-1/16″ 3.30 39.60
1″ 2.90 34.80
1-1/4″ 4.600 55.20
1-1/8″ 3.700 44.40
1-3/8″ 5.600 67.20
1-5/16″ 5.100 61.20
1-1/2″ 6.600 79.20
1-7/16″ 6.100 73.20
3″ 26.53 318.36
1-3/4″ 9.030 108.36
1-5/8″ 7.800 93.60
2-1/2″ 18.42 221.04
2″ 11.80 141.60
1-7/8″ 10.0400 124.80
2-3/8″ 16.920 203.04
2-1/4″ 14.920 179.04

Nickel Alloy C276 Bright Bar Density

Element Hastelloy C276
Density 8.89 g/cm3

ASTM B574 Hastelloy C276 Flat Bar Size

metric weights and sizes
Colour Code Kilogram per Meter bar Size (meters) Length
Blue 0.031 13 x 3 6.0
Blue 0.024 10 x 3
Blue 0.038 16 x 3
Orange 0.046 13 x 5
Red 1.03 16 x 8
Orange 0.064 16 x 5
Orange 0.081 20 x 5
Blue 0.048 20 x 3
Yellow 1.61 20 x 10
White 0.097 20 x 6
Orange 1.01 25 x 5
Blue 0.060 25 x 3
Red 1.61 25 x 8
White 1.21 25 x 6
Pink 2.41 25 x 12
Yellow 2.01 25 x 10
Orange 1.29 32 x 5
Blue 0.077 32 x 3
Red 2.06 32 x 8
White 1.55 32 x 6
Pink 3.09 32 x 12
Yellow 2.58 32 x 10
Blue 0.097 40 x 3
White 1.93 40 x 6
Orange 1.61 40 x 5
Yellow 3.22 40 x 10
Red 2.58 40 x 8
Grey 5.15 40 x 16
Pink 3.86 40 x 12
Blue 1.21 50 x 3
Green 6.14 40 x 20
White 2.41 50 x 6
Orange 2.01 50 x 5
Yellow 4.02 50 x 10
Red 3.22 50 x 8
Grey 6.44 50 x 16
Pink 4.83 50 x 12
Purple 10.01 50 x 25
Green 8.05 50 x 20
Orange 2.62 65 x 5
Blue 1.57 65 x 3
Red 4.18 65 x 8
White 3.14 65 x 6
Pink 6.28 65 x 12
Yellow 5.23 65 x 10
Green 10.05 65 x 20
Grey 8.37 65 x 16
Orange 3.02 75 x 5
White 3.62 75 x 6
Purple 13.1 65 x 25
Yellow 6.04 75 x 10
Red 4.83 75 x 8
Grey 9.66 75 x 16
Pink 7.24 75 x 12
Purple 15.1 75 x 25
Green 12.1 75 x 20
Orange 3.62 90 x 5
Yellow 24.1 75 x 40
White 4.35 90 x 6
Red 5.79 90 x 8
Yellow 7.24 90 x 10
Pink 8.69 90 x 12
Orange 4.02 100 x 5
White 4.83 100 x 6
Red 6.44 100 x 8
Yellow 8.05 100 x 10
Pink 9.66 100 x 12
Grey 12.9 100 x 16
Green 16.1 100 x 20
Purple 20.01 100 x 25
Green 40.02 100 x 50
White 5.31 110 x 6
Red 7.08 110 x 8
Yellow 8.85 110 x 10
Pink 10.06 110 x 12
Orange 5.23 130 x 5
White 6.28 130 x 6
Red 8.37 130 x 8
Yellow 10.05 130 x 10
Pink 12.6 130 x 12
Grey 16.7 130 x 16
Green 20.09 130 x 20
Purple 26.2 130 x 25
Orange 6.04 150 x 5
White 7.24 150 x 6
Red 9.66 150 x 8
Yellow 12.1 150 x 10
Pink 14.5 150 x 12
Grey 19.3 150 x 16
Green 24.1 150 x 20
Purple 30.01 150 x 25
Green 60.04 150 x 50
Orange 7.24 180 x 5
White 8.69 180 x 6
Yellow 14.5 180 x 10
Pink 17.4 180 x 12
Grey 23.2 180 x 16
Green 29.0 180 x 20
Purple 36.2 180 x 25
White 9.66 200 x 6
Red 12.9 200 x 8
Yellow 16.1 200 x 10
Pink 19.3 200 x 12
Grey 25.7 200 x 16
Green 32.2 200 x 20
Purple 40.03 200 x 25
White 12.1 250 x 6
Red 16.1 250 x 8
Yellow 20.01 250 x 10
Pink 24.1 250 x 12
Grey 32.2 250 x 16
Green 40.02 250 x 20
Purple 50.03 250 x 25
White 14.5 300 x 6
Red 19.3 300 x 8
Yellow 24.1 300 x 10
Pink 29.0 300 x 12
Grey 38.6 300 x 16
Green 48.3 300 x 20
Purple 60.04 300 x 25

Nickel Alloy DIN 2.4819 Bar Physical Properties

Element Hastelloy C276
Yield Strength (0.2%Offset) Psi – 52,000 , MPa – 355
Density 8.89 g/cm3
Elongation 40 %
Melting Point 1370 °C (2500 °F)
Hardness (Brinell)  
Tensile Strength Psi – 1,15,000 , MPa – 790

Alloy Product form Dimension (Diameter in MM and Weight per kg/ Meter)
ALLOY C-276 AMS 5750 (Ni/16Mo/15Cr/4W) Rod; cold drawn, pickled, soft annealed Diameter=6.0 , Weight=0.25
Rod; solution annealed, ground, polished Diameter=8.0 , Weight=0.44
Rod; solution annealed, ground, polished Diameter=10.0 , Weight=0.7
Rod; hot finished, ground, solution annealed Diameter=12.0 , Weight=1.01
Rod; hot rolled, solution annealed Diameter=12.7 , Weight=1.13
Rod; hot finished, solution annealed Diameter=16.0 , Weight=1.8
Rod; solution annealed, peeled Diameter=20.0 , Weight=2.85
Rod; hot finished, solution annealed, peeled Diameter=25.4 , Weight=4.5
Rod; hot worked, solution annealed, peeled Diameter=30.0 , Weight=6.1
Rod; hot rolled, solution annealed Diameter=31.8 , Weight=7.05
Rod; Machined, Solution annealed Diameter=35.0 , Weight=7.95
Rod; hot rolled, solution annealed, machined Diameter=40.0 , Weight=11.3
Rod; hot worked, solution annealed, peeled Diameter=45.0 , Weight=14.15
Rod; annealed, peeled Diameter=50.8 , Weight=18.0
Rod; hot rolled, sol annealed, machined Diameter=55.0 , Weight=21.0
Rod; hot finished, solution annealed, peeled Diameter=60.0 , Weight=26.0
Rod; hot finished, solution annealed, peeled Diameter=63.5 , Weight=28.0
Rod; hot worked, solution annealed, peeled Diameter=70.0 , Weight=35.0
Rod; hot finished, solution annealed, peeled Diameter=80.0 , Weight=45.2
Rod; hot finished, solution annealed, peeled Diameter=88.9 , Weight=57.0
Rod; peeled, sol annealed Diameter=90.0 , Weight=57.3
Rod; forged, peeled, annealed Diameter=101.6 , Weight=70.9
Round; hot finished, peeled Diameter=105.0 , Weight=73.3
Round; solution annealed, peeled Diameter=115.0 , Weight=92.3
Rod; forged, annealed, peeled Diameter=130.0 , Weight=118
Rod; forged, solution annealed, turned Diameter=160.0 , Weight=180
Rod; forged, solution annealed, turned Diameter=180.0 , Weight=226.2
Rod; forged, turned Diameter=203.2 , Weight=288
Rod; forged, solution annealed, turned Diameter=230.0 , Weight=369.4
Rod; hot rolled, solution annealed, turned Diameter=250.0 , Weight=436.4

C276 Alloy Hollow Bar Size

Size In MM kg per meter Size in Mm kg per meter
25*25*2.0 1.43 20*20*2.0 1.12
20*20*2.5 1.35 25*25*1.5 1.06
30*30*2.5 2.14 25*25*2.5 1.74
25*25*3.0 2.04 30*30*2.0 1.68
40*40*1.5 1.81 30*30*3.0 2.51
50*50*1.5 2.28 40*40*2.0 2.31
40*40*4.0 4.46 40*40*3.0 3.45
40*40*2.5 2.92 40*40*5.0 5.40
50*50*2.5 3.71 50*50*2.0 2.93
60*60*3.0 5.34 50*50*3.0 4.39
50*50*4.0 5.72 50*50*5.0 6.97
60*60*5.0 8.54 60*60*4.0 6.97
80*80*3.0 7.22 60*60*6.0 9.45
70*70*5.0 10.11 70*70*3.6 7.46
90*90*5.0 13.30 70*70*6.3 12.50
80*80*5.0 11.70 75*75*3.0 7.07
70*70*3.0 6.28 80*80*3.6 8.59
90*90*3.0 8.01 80*80*6.0 13.90
70*70*8 15.30 90*90*3.6 9.72
100*100*4.0 12.00 90*90*6.0 15.76
90*90*8.0 20.40 100*100*3.0 8.96
120*120*6.3 22.30 100*100*5.0 14.80
120*120*10 34.20 100*100*6.0 16.19
120*120*5 18.00 100*100*10 27.90
100*100*5.0 14.80 120*120*6.0 21.30
100*100*8.0 22.90 120*120*8.0 27.90
120*120*12.5 41.60 120*120*12 35.8
140*140*6.3 26.30 140*140*5.0 21.10
140*140*10 40.40 140*140*8 32.90
150*150*5.0 22.70 140*140*12.5 49.50
150*150*8.0 35.40 150*150*6.3 28.30
180*180*10 53.00 150*150*10 43.60
180*180*6.3 34.20 150*150*16 66.40
150*150*16 66.40 180*180*5 27.40
150*150*12.5 53.40 180*180*8 43.00
200*200*6 35.8 180*180*12.5 65.20
180*180*16 81.40 200*200*5 30.50
250*250*8 60.50 200*200*6.3 38.2
250*250*12.5 92.60 200*200*10 59.30
250*250*6.3 48.10 200*200*16 91.50
250*250*10 75.00 200*200*8 48.00
250*250*16 117.00 200*200*12.5 73.00
400*400*16 192 300*300*6.3 57.90
350*350*12.5 132.00 300*300*10 57.90
300*300*16 142.00 300*300*12.5 112.00
350*350*10 106.00 350*350*8 85.70
350*350*16 167.00 300*300*8 90.70
400*400*12 141.00 400*400*10 122.00
300*300*8 73.10 400*400*12.5 152.00

Hastelloy C276 Round Bar Standards

Hastelloy C276 Round Bar Standards

Alloy C276 Rods Supplier

Nickel Alloy C 276 – Round

*CG – Centerless Ground
RT – Hot Rolled and Rough Turned

 1 CG
1-1/8 CG
1-1/4 CG
1-1/2 CG
1-3/4 CG
2 CG		 1/4 CG
3/8 CG
1/2 CG
5/8 CG
3/4 CG
7/8 CG		 2-1/4 CG
2-1/2 CG
2-3/4 CG
3 CG
3-1/2 RT
4 RT
Manufacturer and supplier of Alloy C276 Cold Finished Bar, We are C276 Hastelloy Bright Bar and pump shaft Manufacturer in India as per client requirment, check Hastelloy 2.4819 Threaded Bar Price list, tolerance chart and weight

ASTM B574 Hastelloy Alloy C276 Bars Inventory

Hastelloy C276 Round Bar ASME SB574 Hastelloy C276 Bars
Hastelloy Round Bar Hastelloy Alloy C276 Hex Bar
C276 Round Bar Hastelloy C276 Flat Bar
Hastelloy C276 Round Bar Price Alloy C276 Round Bar
Alloy C276 Bar Hastelloy® Alloy C276 Square Bar
Hastelloy Alloy C276 Round Bar Alloy C276 Rods
ASTM B574 Hastelloy C276 Flat Bar Hastelloy C276 Forged Round Bar
UNS N10276 Hastelloy C276 Hex Bar ASTM B574 Hastelloy Alloy C276 Bars
C276 Hastelloy Round Bar ASTM B574 Hastelloy Alloy Bars
2.4819 Hastelloy C276 Rod Hastelloy En Nimo16cr15w Rectangle Bar
Hastelloy C276 Alloy Hollow Bar C276 Hastelloy Black Bars
Hastelloy C276 Grade Round Rod Hastelloy DIN 2.4819 Round Bars
Hastelloy C-276 UNS N10276 Forged Round Bars WNR 2.4819 Hex Bars
Hastelloy UNS N10276 Cold Drawn Bar Hastelloy C276 Bright Bar
Hastelloy C276 N10276 Bright Bar C276 Hastelloy Alloy Square Bar
Hastelloy C276 UNS N10276 Square Bar Hastelloy C276 ASTM B574 Bars
Alloy C276 UNS N10276 Forged Bar Hastelloy® Alloy C276 Bar
Hastelloy C276 B574 Hexagonal Bar Hastelloy JIS NW 0276 Bars
Nickel Alloy C276 Polished Bar Hastelloy UNS N10276 Forged Bar
Hastelloy 2.4819 Threaded Bar ASTM B574 Alloy C276 Bars
Haynes Alloy C276 Cold Finished Bar Hastelloy C276 Black Bars
C276 Alloy Black Bar Nickel Alloy C276 Round Bar
ASTM B574 UNS N10276 Hastelloy® Alloy C276 Rectangle Bar
Hastelloy C276 Rod Alloy 2.4819 Bar
Hastelloy UNS N10276 Round Bar Hastelloy C276 Bars
Alloy C276 Rod Hastelloy 2.4819 Round Bars
ASME SB 574 N10276 Square Bar Alloy N10276 Bars
Nickel Alloy C276 Bright Bar ASME SB574 Hastelloy Alloy C276 Round Bars
Nickel Alloy DIN 2.4819 Bar Hastelloy C276 Hex Bars
Hastelloy C276 Square Bar Alloy C276 Hex Bar
AMS 5750 Round Bar Hastelloy Bar
ASTM B574 UNS N10276 Bar ASTM B574 UNS N10276 Round Bar
UNS N10276 Rod Hastelloy Alloy C276 Bar

Hastelloy C276 Round Bar Processing

Hastelloy C276 Round Bar Processing
Products
Other
Industry
  • PM Metal Industry
  • PM Metal Industry
  • PM Metal Industry
  • PM Metal Industry

Searching for

Hastelloy C276 Round Bar supplier in your country? Checklist of material we export in the following areas.

Application Projects
P.M. Metal Logo

AMS 5750 Round Bar

Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).

Application Projects
P.M. Metal Logo

ASME SB574 Hastelloy C276 Bars

Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).

Application Projects
P.M. Metal Logo

Alloy C276 Rods

USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.

Application Projects
P.M. Metal Logo

Hastelloy C276 Black Bars

Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.

Application Projects
P.M. Metal Logo

Nickel Alloy C276 Round Bar

Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.

Application Projects
P.M. Metal Logo

Hastelloy Bar

France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.

© 2022 All Rights Reserved by P.M. Metal.