Grade 304 Square Hollow Bar and Stainless Steel 316 Box Bar Suppliers

Stainless Steel Square Bar

Stainless Steel Square Bar vs Rod
Stainless steel square bars and rods are versatile components designed with aneven cross-sectional area. These bars can be used interchangeably and can be differentiated on certain key features.

  • A stainless steel square bar has uniform cross-sections that are smaller than its original size. A square rod of the stainless steel range may have a slightly uneven cross-sectional area.
  • Square bars have a hollow opening grade. A square rod doesn’t require any openings and is completely sealed.

What is 304 and 316 Stainless Steel Square Bar?
Stainless steel 304 and 316 are common grades used to manufacture stainless steel square bars. Both these grades can be distinguished on key features.

  • Stainless steel 304 square bar is designed with a chemical content of 18% chromium and 8% nickel. 316 stainless steel square bars possess a chemical content of 6% chromium, 10-12% nickel, and 2%-3% of molybdenum.
  • The content of molybdenum in the 316 stainless steel square bars gives these components enhanced pitting and corrosion resistance properties. 
  • A 304 stainless steel square bar is cheaper than SS 316 square bar.

Is Stainless Steel Rectangular Hollow Bar magnetic?
Stainless steel rectangular hollow bar can be magnetic if its meets certain requirements.

  • The alloy must contain iron.
  • The crystal structure should be either martensitic or ferritic.

Cold Drawn vs Hot RolledStainless Steel Square Bars
Stainless steel square bars are designed in the hot and cold rolled process. Both these versatile processes can be distinguished from key features.

  • A hot rolled stainless steel square bar is produced by processing the material at 1700 degrees F till it reaches its recrystallization value. This allows subsequent products to be formed easily. A cold rolled stainless steel square bar is processed soon after the hot rolling process at room temperatures. 
  • Hot rolled components showcase slightly rounded and rough edges. Cold rolled bars have a sharp edge with a precise finish.
  • Stainless steel cold rolled square bars possess a superior surface finish coupled with enhanced strength when compared to hot rolled Stainless steel square bars.
  • SS Hot rolled square bars are cheaper than standard SS cold rolled square bars.

Manufacturer of Stainless Steel Square Hollow Bar, SS 304 And 316 Square Bar in India, Check Stainless Steel Solid Square Bar standard specifications

Stainless Square Bar Specification

Grade List All Grades
Bar Finishing Polish, Bright, Square Round Bar
Otder Services Centreless Grinding, Machining, Bending, Heat Treatment, Rolling, Polish, Anneling, Forging, Pickling, Cutting

Stainless Steel Square Rod Price In India

Produtcs Size(mm) WT PER FEET IN KGS WT PER MTR IN KGS Price in INR Price in UAE Dirham Price in USD
STAINLESS STEEL BRIGHT SQUARE BARS GRADE: AISI 304L ( 22 MM ) 16 0.62 2.05 164 8.06 UAE Dirham $2.19
BRIGHT STEEL BARS MADE OUT OF STAINLESSSTEEL STAINLESS STEEL SQUARE BARS, BRIGHT POLISHED, BUFFED FINISH, WITHOUT OIL O 18 0.79 2.59 165 8.11 UAE Dirham $2.21
STAINLESS STEEL BRIGHT BARS SHAPE : SQUARE GRADE : AISI 304L/1.4307 ( 20 MM ) 20 0.76 2.49 141 6.93 UAE Dirham $1.89
STAINLESS STEEL ROD/BAR SQUARE PART NO:ASGRCS1059RM0115-5PH AMS 5659 2.00X2.00 (QTY:50 PCS, NET WT:977.00 LBS) 22 1.18 3.87 1,131 55.59 UAE Dirham $15.13
(FOC ITEM) STAINLESS STEEL SQUARE BAR (3 PCS) 25 1.52 5.00 1,109 54.51 UAE Dirham $14.84
STAINLESS STEEL BARS SQUARE DRAWN 1.4404/316L QUENCHED EN10278 H11 22.00 DEG REASED LENGTH 3000+200 MM 28 1.91 6.27 245 12.04 UAE Dirham $3.28
ST ST SQ BAR 15-5 PH 2.00X2.00 (STAINLESS STEEL SQUARE BARASGRCS1059RM01, DIM:L16IN, NET WT:199.177 LBS, QTY:11 PCS) 30 2.19 7.20 936 46.00 UAE Dirham $12.52

Types of Stainless Steel Square Bar

Stainless Steel Solid Square Bar
Stainless Steel Solid Square Bar
Stainless Steel Solid Square Bar
Polished Stainless Steel Square Bar
Polished Stainless Steel Square Bar
Polished Stainless Steel Square Bar
Stainless Steel Square Bar
Stainless Steel Square Bar
Stainless Steel Square Bar
SS Box Bar
SS Box Bar
SS Box Bar
Stainless Steel square rod
Stainless Steel square rod
Stainless Steel square rod
ASTM A276 Stainless Steel Square Bar
ASTM A276 Stainless Steel Square Bar
ASTM A276 Stainless Steel Square Bar
Stainless Steel Hollow Square Bar
Stainless Steel Hollow Square Bar
Stainless Steel Hollow Square Bar
ASME SA479 SS Square Rod
ASME SA479 SS Square Rod
ASME SA479 SS Square Rod
SS Square Bar
SS Square Bar
SS Square Bar
SS Square Rod
SS Square Rod
SS Square Rod
Stainless Square Rod
Stainless Square Rod
Stainless Square Rod
Metric Stainless Steel Square Bar
Metric Stainless Steel Square Bar
Metric Stainless Steel Square Bar
Stainless Steel Twisted Square Bar
Stainless Steel Twisted Square Bar
Stainless Steel Twisted Square Bar
Grade 304 Square Hollow Bar
Grade 304 Square Hollow Bar
Grade 304 Square Hollow Bar
Stainless Steel 316 Box Bar
Stainless Steel 316 Box Bar
Stainless Steel 316 Box Bar
Stainless Steel Square Hollow Bar
Stainless Steel Square Hollow Bar
Stainless Steel Square Hollow Bar
Stainless Steel 316 Square Bar
Stainless Steel 316 Square Bar
Stainless Steel 316 Square Bar
ASTM A276 Stainless Steel 316 Square Bar
ASTM A276 Stainless Steel 316 Square Bar
ASTM A276 Stainless Steel 316 Square Bar
304 Stainless Steel Square Bar
304 Stainless Steel Square Bar
304 Stainless Steel Square Bar
Cold Finished Square Bar
Cold Finished Square Bar
Cold Finished Square Bar
Hot Finished Square Bar
Hot Finished Square Bar
Hot Finished Square Bar

SS Square Bar Hs Code

Heading Codes Heading Description
7222 Harmonized Syestem Codes Of Other Bars And Square Bars Of SS; Angles, Shapes And Sections Of Stainless Steel First Six Digits HSN Code SS Square Bar

304 Stainless Steel Square Bar Sizes And Schedules

Imperial SS Square Bar 1/4″, 5/16″, 3/8″ 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1 1/4″, 1 1/2″, 1 3/4″, 2”, 4″
Metric Stainless Steel Square bar 6mm, 8mm, 10mm , 12mm, 13mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 70mm, 75mm, 80mm, 90mm, 100mm, 120mm, 150mm

Ss 304 Square Bar Different grades

SQUARES
Size(mm) WT PER FEET IN KGS WT PER MTR IN KGS
16 0.62 2.05
18 0.79 2.59
20 0.76 2.49
22 1.18 3.87
25 1.52 5.00
28 1.91 6.27
30 2.19 7.20
32 2.50 8.19
36 3.16 10.37
38 3.52 11.55
40 3.90 12.80
45 4.94 16.20
50 6.10 20.00
56 7.65 25.08
60 - -
65 - -
70 - -
75 - -
80 - -
90 - -
100 - -

Cold Finished Square Bar Processing Steps

  • Bar Cutting
  • Heat Treating
  • Machining
  • Additional Services

Get 8mm Stainless Steel Hollow Square Bar, Cold Drawn SS Square Bar Weight Chart, SS 304 Square Bar Size, Buy Stainless Steel Bright Square Bar, Stainless Steel Square Rod Price In India

316 Square Bar Manufacturing Specifications

  • ASTM A276 / A276M, Standard Specification for Stainless Steel Bars and Shapes
  • ASTM A262 – Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steel
  • ASTM A484 / A484M, Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
  • ASTM A479/ A479M, Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

Hot Finished Square Bar Straightness Tolerance

  • HF: 1/8 inch in any 5 foot; but may not exceed 1/8 X (length in ft/5)

Stainless Square Rod Features

Stainless Square Rod Features
  • Long work life
  • Superior performance
  • Chemical resistance
  • Unmatched quality
  • 100% purity level
  • High tensile strength
  • Corrosion resistance

SS Square Bar Sizes

Width X Depth Width X Depth Width X Depth
milimeter milimeter milimeter
5X5 20X20 48X48
4X4 19X19 45X45
7X7 22X22 53X53
6X6 21X21 50X50
9X9 25X25 60X60
8X8 24X24 56X56
11X11 28X28 67X67
10X10 26X26 63X63
13X13 32X32 75X75
12X12 30X30 70X70
15X15 35X35 85X85
14X14 34X34 80X80
17X17 40X40 95X95
16X16 38X38 90X90
18X18 42X42 100X100
Held wide stock of 303 Stainless Steel Square Bar, SS Square Bar Manufacturer, Buy Of 12 MM Stainless Steel Solid Square Hot / Cold Drawn Bar and view Stainless Steel 316 Square Bar size, dimension

Stainless Steel Square Bar Weight Per Foot

Stainless Steel Square Bar Size and Theoretical Weight
Weight (kilogram/m) Size (milimeter) Weight (kilogram/m) Size (milimeter) Weight (kilogram/m) Size (milimeter) Weight (kilogram/m) Size (milimeter)
1.0784 15 × 15 0.0071 3 × 3 28.0548 60 × 60 7.0137 30 × 30
2.003 16 × 16 0.0127 4 × 4 31.0474 63 × 63 8.012 32 × 32
2.0292 17 × 17 0.0198 5 × 5 35.0598 67 × 67 9.0167 34 × 34
2.0569 18 × 18 0.0285 6 × 6 38.0857 70 × 70 9.0714 35 × 35
2.0863 19 × 19 0.0389 7 × 7 44.0606 75 × 75 11.0451 38 × 38
3.0172 20 × 20 0.0508 8 × 8 50.0752 80 × 80 12.0688 40 × 40
3.0497 21 × 21 0.0642 9 × 9 52.0294 85 × 85 13.0989 42 × 42
3.0838 22 × 22 0.0793 10 × 10 64.0233 90 × 90 16.0058 45 × 45
4.0568 24 × 24 0.096 11 × 11 71.0568 95 × 95 18.0271 48 × 48
4.0956 25 × 25 1.0142 12 × 12 79.03 100 × 100 19.0825 50 × 50
5.0361 26 × 26 1.034 13 × 13 22.0275 53 × 53
6.0217 28 × 28 1.0554 14 × 14 24.0868 56 × 56
Siding × Siding × 0.000793 = Weight (kg) per meter

Cold Finished Square Bar Tolerances

Stainless Steel CF Tolerances Plus Minus
5/16″ to 1/2″ (exclusive) 0.000 0.003
1/8″ to 5/16″ (exclusive) 0.000 0.002
over 1″ to 2″ (inclusive) 0.000 0.006
1/2″ to 1″ (inclusive) 0.000 0.004
over 2″ to 3″ (inclusive) 0.000 0.008

SS Square Rod Condition

H&T Hardened and tempered.
ANN Annealed
PH Precipitation hardened.

Brushed Stainless Steel Square Bar Chemical Composition

Stainless Steel Grade S Mn Mo C Ti Fe Cr P N Si Ni
Stainless Steel 304 minimum 18.00 8.00
maximum 0.0030 2.00 0.008 20.00 0.0045 0.010 0.075 10.05
304L minimum 18.00 8.00
maximum 0.0030 2.00 0.0030 20.00 0.0045 0.010 0.075 12.00
304H minimum 0.004 18.00 8.00
maximum 0.0030 2.00 0.0010 20.00 0.0045 0.075 10.05
Stainless Steel 310 0.0015 maximum 2 maximum 0.010 maximum 0.0015 maximum 24.000 26.000 0.0020 maximum 54.07 minimum 0.0015 maximum 19.000 21.000
SS 310S 0.0030 maximum 2 maximum 0.075 maximum 0.008 maximum 24.000 26.000 0.0045 maximum 53.0095 minimum 1.000 maximum 19.000 21.000
Stainless Steel 310H 0.0030 maximum 2 maximum 0.004 0.010 24.000 26.000 0.0045 maximum 53.0885 minimum 1.000 maximum 19.000 21.000
Stainless Steel 316 minimum 2.003.00   16.00 10.00
maximum 0.0030 2.00 0.0035   18.00 0.0045 0.075 14.00
316L minimum 2.003.00     16.00 10.00
maximum 0.0030 2.00 0.0035   18.00 0.0045 0.075 14.00
316TI 0.0030 maximum 10.000 14.000 0.075 maximum 0.008 maximum 16.000 18.000 0.0045 maximum 2.00 maximum 2.000 3.000
Stainless Steel 317 0.0030 maximum 2 maximum 3.000 4.000 0.008 maximum 57.0845 minimum 18.000 20.000 0.0045 maximum 1 maximum
SS 317L 0.0030 maximum 2.00 maximum 3.000 4.000 0.0035 maximum 57.089 minimum 18.000 20.000 0.0045 maximum 1.00 maximum 11.000 15.000
SS 321 0.0030 maximum 2.00 maximum 0.008 maximum 5(C+N) 0.070 maximum 17.000 19.000 0.0045 maximum 0.010 maximum 1.00 maximum 9.000 12.000
Stainless Steel 321H 0.0030 maximum 2.00 maximum 0.004 0.010 4(C+N) 0.070 maximum 17.000 19.000 0.0045 maximum 0.010 maximum 1.00 maximum 9.000 12.000
347/ 347H 0.0030 maximum 2.00 maximum 0.008 maximum 17.000 20.000 0.0045 maximum 1.00 maximum 9.00013.000
Stainless Steel 410 minimum 11.05
maximum 0.0030 1.00 0.015 13.05 0.0040 1.000 0.075
446 minimum 23.00 0.010
maximum 0.0030 1.05 0.02 30.00 0.0040 0.025 0.075 0.050
Stainless Steel 904L minimum 4.000 19.00 0.010 23.000
maximum 0.0035 2.000 5.000 0.020 23.00 0.0045 0.025 1.000 28.000

Cold Drawn Stainless Steel Square Bar Mechanical Properties

Stainless Steel Grade Elongation Density Melting Point Tensile Properties Yield Properties
304H 40 % 8.0 g/centimeter3 (2550 °F) 1400 °C MPa 515, Psi 75000 MPa 205, Psi 30000
Stainless Steel 304/ 304L 35 % 8.0 g/centimeter3 (2550 °F) 1400 °C MPa 515, Psi 75000 MPa 205, Psi 30000
904L 35 % 7.95 g/centimeter3 (2460 °F) 1350 °C MPa 490, Psi 71000 MPa 220, Psi 32000
306/ 316H 35 % 8.0 g/centimeter3 (2550 °F) 1400 °C MPa 515, Psi 75000 MPa 205, Psi 30000
Stainless Steel 310 / 310S / 310H 40 % 7.9 g/centimeter3 (2555 °F) 1402 °C MPa 515, Psi 75000 MPa 205, Psi 30000
316L 35 % 8.0 g/centimeter3 (2550 °F) 1399 °C MPa 515, Psi 75000 MPa 205, Psi 30000
Stainless Steel 321 35 % 8.0 g/centimeter3 (2650 °F) 1457 °C MPa 515, Psi 75000 MPa 205, Psi 30000
317 35 % 7.9 g/centimeter3 (2550 °F)1400 °C MPa 515, Psi 75000 MPa 205, Psi 30000
347 35 % 8.0 g/centimeter3 (2650 °F) 1454 °C MPa 515, Psi 75000 MPa 205, Psi 3000

Precision Ground Stainless Steel Square Bar Packing

Precision Ground Stainless Steel Square Bar Packing

One of India’s largest 40mm Square Stainless Steel Bar, Cold Drawn Stainless Steel Square Bar Suppliers in india, View high quality SS 316 Square Bars, Check Sizes of Polished Stainless Steel Square Bar

Metric Stainless Steel Hot Finished Square Bar Tolerance

Stainless Steel HF Tolerances Plus Minus Out of Sq
Over 1-1/4″ to 1-3/8″ (inclusive) 0.012 0.012 0.018
Over 1″ to 1-1/8″ (inclusive) 0.010 0.010 0.015
Over 1-1/8″ to 1-1/4″ (inclusive) 0.011 0.011 0.016
Over 1-1/2″ to 2″ (inclusive) 1/64 1/64 0.023
Over 1-3/8″ to 1-1/2″ (inclusive) 0.014 0.014 0.021

Grade 304 Square Hollow Bar Surface Finish

BD Bright drawn Slit rolled edge SRE
CD Cold drawn Polished P
P&T Peeled and turned Rough turned/peeled RT
CF Cold finished Hot rolled pickled and annealed HRAP
CG Centreless ground Hot finished HF
ST Smooth turned reeled and Peeled PR

Stainless Steel Square Bar Dimensions

Stainless Steel Square Bar Dimensions

Stainless Steel Solid Square Bar Equivalent

STANDARD JIS AFNOR GOST UNS BS WERKSTOFF NR. EN
Stainless Steel 304L SUS 304L Z3CN18‐10 03Х18Н11 S30403 3304S11 1.4306 / 1.4307 X2CrNi18-9 / X2CrNi19-11
SS 310 SUS 310 20Ch25N20S2 S31000 310S24 1.4841 X15CrNi25-20
SS 304H S30409 1.4301
Stainless Steel 304 SUS 304 Z7CN18‐09 08Х18Н10 S30400 304S31 1.4301 X5CrNi18-10
SS 310S SUS 310S 20Ch23N18 S31008 310S16 1.4845 X8CrNi25-21
SS 310H S31009
Stainless Steel 316L SUS 316L Z3CND17‐11‐02 / Z3CND18‐14‐03 03Ch17N14M3 / 03Ch17N14M2 S31603 316S11 / 316S13 1.4404 / 1.4435 X2CrNiMo17-12-2 / X2CrNiMo18-14-3
SS 316H S31609 1.4401
Stainless Steel 316 SUS 316 Z7CND17‐11‐02 S31600 316S31 / 316S33 1.4401 / 1.4436 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316Ti SUS 316Ti Z6CNDT17‐123 08Ch17N13M2T S31635 320S31 1.4571 X6CrNiMoTi17-12-2
SS 317 SUS 317 S31700 1.4449
SS 321 SUS 321 S32100 1.4541 X6CrNiTi18-10
Stainless Steel 317L SUS 317L S31703 1.4438 X2CrNiMo18-15-4
SS 321H SUS 321H S32109 1.4878 X12CrNiTi18-9
SS 347H SUS 347H S34709 1.4961 X6CrNiNb18-12
SS 347 SUS 347 08Ch18N12B S34700 1.4550 X6CrNiNb18-10
Stainless Steel 904L SUS 904L Z2 NCDU 25-20 STS 317J5L N08904 904S13 1.4539 X1NiCrMoCu25-20-5

Difference Between Square Bar And Square Tube

Stainless Steel square bar is that strong steel bar made of steel ingots through squeezing, anyway the very unique square tube is empty segment with cycle of welding the pipe's billets.

Hot Finished Square Bar Testing

Hot Finished Square Bar Testing
  • Eddy Current test
  • Mechanical examining like tensile, Elongation and reduction of area.
  • Buckling & Crushing test
  • Positive material recognition
  • Pitting Corrosion Test
  • Chemical examination
  • Radiographic Test

Largest supplier of small-quantity SS Square Rod, Stainless Square Bar 6mm, Square Stainless Steel Bars in India, Din 1.4436 SS Square Bars Price, dia 3-450mm Stainless Steel Square Bars Stock

Stainless Steel Square Bar Tolerances

SIZE in Milimeter PERMITTED VARIATION CHART
PRIMARY ROLLED RE-ROLLED
DIAMETER +/- Milimeter OUT OF SECTION Milimeter OUT OF SECTION Milimeter DIAMETER OR WIDTH ACROSS FLATS +/- Milimeter
<=16 0.3 0.2
>16 <=26 0.5 0.3
>26 <=38 0.6 0.4
>38 <=51 0.8 0.5
>51 <=64 0.9 0.6
>64 <=76 1.1 0.7
>76 <=90 1.3 2.0
>90 <=120 1.5 2.3
>120 <=160 2.0 3.0
>160 <=200 2.5 3.8
>200 3.0 4.5

ASTM A276 Stainless Steel 316 Square Bar Inventory

Stainless Steel Square Bar Cold Drawn Stainless Steel Square Bar
Stainless Square Bar Precision Ground Stainless Steel Square Bar
Ss Square Bar Stainless Steel Rectangular Hollow Bar
Ss Square Rod 1/4 Inch Stainless Steel Square Bar
Stainless Steel Square Rod Metric Stainless Steel Square Bar
304 Stainless Steel Square Bar Stainless Steel Twisted Square Bar
303 Stainless Steel Square Bar 316l Stainless Steel Square Bar
8mm Square Stainless Steel Bar 410 Stainless Steel Square Bar
316 Stainless Steel Square Bar 420 Stainless Steel Square Bar
12mm Stainless Steel Square Bar 440c Stainless Steel Square Bar
10mm Stainless Steel Square Bar Grade 304 Square Hollow Bar
Ss 304 Square Bar Stainless Steel 316 Box Bar
10mm Square Stainless Steel Bar Stainless Steel Square Hollow Bar
6mm Square Stainless Steel Bar Stainless Steel 316 Square Bar
Stainless Steel Solid Square Bar ASTM A276 Stainless Steel 316 Square Bar
Stainless Square Rod SS 316 Square Bars
416 Stainless Steel Square Bar Cold Finished Square Bar
Brushed Stainless Steel Square Bar Hot Finished Square Bar
Stainless Steel Black Square Bar Polished Stainless Steel Square Bar

Formula of Stainless Steel Square Bar Weight Calculator

Square Bar Weight Formula
0.00623 X ( mm ) Diam X ( mm ) Diam = Weight / Meter
0.0019 X ( mm ) Diam X ( mm ) Diam = Weight / Feet
Square Bar Weight Formula 0.00788 X ( mm ) Diam X ( mm ) Diam = Weight / Meter
0.00240 X ( mm ) Diam X ( mm ) Diam = Weight / Feet
Square Bar Weight Forumla
0.00680 X ( mm ) Diam X ( mm ) Diam = Weight / Meter
0.002072 X ( mm ) Width X ( mm ) Diam = Weight / Feet
Square Bar Weight Forumla
0.00798 X ( mm ) Thickness X ( mm ) Width = Weight / Meter
0.00243 X ( mm ) Width X ( mm ) Thickness = Weight / Fee

SS 316 Square Bar Applications

  • Machining equipment
  • Machining Tools
  • Textile industries
  • Auto mobile industries
  • Fasteners
  • Heavy engineering

Searching for

Stainless Steel Square Bar Manufacturers In India in your country? Checklist of material we export in the following areas.

Application Projects
P.M. Metal Logo

Stainless Square Bar

Bangladesh, Jakarta -Indonesia, Dubai, Los Alamos -Mexico, Hong Kong, Turkey, Argentina, Germany, China, Oman, Saudi Arabia (KSA).

Application Projects
P.M. Metal Logo

Ss Square Bar

Malaysia, Poland, Romania, Indonesia, Malaysia, Iran, Qatar, New Zealand, Brazil, Netherlands, United Arab Emirates (UAE).

Application Projects
P.M. Metal Logo

Ss 304 Square Bar

USA, Chile, Ellington -United States, Canada, Sweden, United States, Greece, Singapore, Vietnam, Mexico, Denmark, Thailand, Finland.

Application Projects
P.M. Metal Logo

Stainless Square Rod

Russia, Belgium, Norway, Egypt, Bahrain, Philippines, South Korea, Peru, Malaysia, Tehran -Iran, Colombia, Italy.

Application Projects
P.M. Metal Logo

Stainless Steel Black Square Bar

Spain, Jakarta, Europe, Australia, Jordan, Dammam -KSA, Japan, Istanbul -Turkey, NY 12203 (USA), Dubai -UAE, Kuala Lumpur.

Application Projects
P.M. Metal Logo

Grade 304 Square Hollow Bar

France, Singapore, Taiwan, South Africa, Portugal, Morocco, Czechia, Kuwait, Austria, United Kingdom (UK), Nigeria.